Search results for "Dispersion."
showing 10 items of 1094 documents
Double bond-functionalized POSS: dispersion and crosslinking in polyethylene-based hybrid obtained by reactive processing
2016
Polyethylene-based organic inorganic hybrids were prepared by one-step reactive melt mixing using a mono-functionalized nanofiller, i.e., allyl-heptaisobutyl-substituted polyhedral oligomeric silsesquioxane (1POSS) and a multi-functionalized octavinyl polyhedral oligomeric silsesquioxane (8POSS). The hybrids were also prepared in dicumyl peroxide (DCP) presence and morphological, spectroscopical and calorimetric analysis were carried out. Moreover, rheological measurement and Sohxlet extraction were performed on investigated samples. It was inferred that double bonds of POSS functional groups were triggered by radicals coming from the peroxide decomposition or from the degradation reactions…
POSS Grafting on Polyethylene and Maleic Anhydride-Grafted Polyethylene by One-Step Reactive Melt Mixing
2016
This study reports the one-step reactive melt mixing preparation of organic–inorganic hybrid based on maleic anhydride-grafted polyethylene and 3-(2-aminoethyl)aminopropyl-heptaisobutyl substituted polyhedral oligomeric silsesquioxane, (NPOSS), as well as on low-density polyethylene and allyl-heptaisobutyl-POSS (1POSS) in dicumyl peroxide presence, which is believed to activate the unsaturation of the reactive functional group of POSS itself. The successful grafting of POSS molecules onto polymeric backbones was probed through rheological and spectroscopic analysis. Grafting of POSS molecules enhances their dispersion in the polymeric matrix as shown by morphological analysis. Moreover, the…
Reprocessing of PLA/graphene nanoplatelets nanocomposites
2017
This work reports a study on the effect of multiple reprocessing on the properties of poly(lactic acid) (PLA) filled with graphene nanoplatelets (GnP) compared to the melt reprocessed neat polymeric matrix. In particular, morphological, X-Ray Diffraction and Micro-Raman analyses, intrinsic viscosity measurements, thermal, rheological and mechanical tests were carried out on materials reprocessed up five times by means of a single screw extruder. The results indicated that the presence of GnP decreased the degradation rate as a function of the reprocessing cycles in comparison with the neat PLA that, on the contrary, showed a more drastic reduction of the molecular weight. Moreover, the repr…
Inherently fluorescent polyaniline nanoparticles in a dynamic landscape
2012
Abstract In this paper we report for the first time on the emissive behavior of two polyaniline (PANI) nanoparticle systems produced via oxidative chemical polymerization in the presence of either poly(vinyl alcohol) (PVA) or chitosan as polymeric stabilizers in water. The emission from PANI nanoparticles is irreversibly quenched by an increase of pH of the suspending medium from acid to neutral (chitosan–PANI) or alkaline (PVA–PANI). Conversely, PANI nanorods synthesized in the same conditions of the above, but in presence of poly(N-vinyl pyrrolidone), is not emissive at any pH. The role of the polymeric surfactant as a soft template is key in controlling the morphology and the properties …
Accelerated weathering of PP based nanocomposites: Effect of the presence of maleic anhydryde grafted polypropylene
2013
Polymer nanocomposites are currently a topic of great interest. The increasing importance they are gaining also in the standpoint of industrial applications, is giving concerns regarding their environmental stability and, in general, their behaviour in outdoor applications, under direct solar irradiation. Papers available in the literature have highlighted the different influences of different nanosized fillers, in particular clay-based nanofillers; however, few data are available regarding other nanosized fillers. Furthermore, the research on polymer nanocomposites has clearly pointed out that the use of compatibilizers is required to improve the mechanical performance and the dispersion o…
Accelerated laboratory weathering of polypropylene composites filled with synthetic silicon-based compounds
2019
Abstract Non-functionalized and n-alkyl functionalized polyhedral oligomeric silsesquioxanes (POSS), siloxane-silsesquioxane resins and the sol-gel silicas were for the first time examined as possible UV-stabilizers and/or antioxidants in polypropylene (PP). The obtained composites were subjected to the accelerated laboratory weathering tests. The influence of the weathering conditions on the structure and properties of the PP materials was evaluated on the basis of the results from Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and differential scanning calorimetry (DSC) studies. It was found that weathering resistance of the PP materials was strongly de…
Thermomechanical Analysis of Isora Nanofibril Incorporated Polyethylene Nanocomposites
2021
The research on cellulose fiber-reinforced nanocomposites has increased by an unprecedented magnitude over the past few years due to its wide application range and low production cost. However, the incompatibility between cellulose and most thermoplastics has raised significant challenges in composite fabrication. This paper addresses the behavior of plasma-modified polyethylene (PE) reinforced with cellulose nanofibers extracted from isora plants (i.e., isora nanofibrils (INFs)). The crystallization kinetics of PE&ndash
A one-pot method to enhance dissolution rate of low solubility drug molecules using dispersion polymerization in supercritical carbon dioxide
2009
The surfactant assisted polymerization of 1-vinyl-2-pyrrolidone in supercritical carbon dioxide in the presence of Piroxicam, selected as a model of a low aqueous solubility drug, was studied in order to prepare in a single step a polymeric composite to enhance the rate of dissolution of the pharmaceutical compound. Reactive entrapping was carried out at 65 degrees C in the P range 21-38MPa. Under proper operative conditions we obtained the composite under the form of sub-micron spherical particles with relatively narrow particle size distribution. Drug loadings higher than 12% (w/w) were obtained and XRD and Raman spectroscopy suggest that the anti-inflammatory agent is dispersed in the ma…
Influence of Temperature on Calcium Hydroxyapatite Nanopowders
2012
The aim of this work is to investigate the effects of thermal treatment, in the range of temperature between 80°C - 900°C, on crystallinity, morphology and particles size of calcium hydroxylapatite nanopowders (HAp). A complete study was carried out applying 31P Magic Angle Spinning NMR, X-ray diffraction, nitrogen porosimetry and Transmis- sion Electron Microscopy techniques. HAp specimens were prepared by chemical precipitation in an aqueous solution of calcium nitrate and ammonium hydrogen phosphate. The thermal treatment performed, showed the formation of crystals whose appearance has three main morphologies and different particles size. HAp treated up to 500°C showed a set of needle-li…
Electrochemical Tantalum Oxide for Resistive Switching Memories
2017
Redox-based resistive switching memories (ReRAMs) are strongest candidates for the next-generation nonvolatile memories fulfilling the criteria for fast, energy efficient, and scalable green IT. These types of devices can also be used for selector elements, alternative logic circuits and computing, and memristive and neuromorphic operations. ReRAMs are composed of metal/solid electrolyte/metal junctions in which the solid electrolyte is typically a metal oxide or multilayer oxides structures. Here, this study offers an effective and cheap electrochemical approach to fabricate Ta/Ta2O5-based devices by anodizing. This method allows to grow high-quality and dense oxide thin films onto a metal…