Search results for "Dissolution"
showing 10 items of 333 documents
Batch-to-Melt Conversion Kinetics in Sodium Aluminosilicate Batches Using Different Alumina Raw Materials
2016
The batch-to-melt conversion in batches of sand, soda ash and corundum (C), alumina spinel (A), boehmite (B), or gibbsite (G) as Al2O3 carrier are studied using thermal analysis, X-ray diffraction, and 27Al nuclear magnetic resonance spectroscopy. Laboratory-scaled batches are either heated continuously or quenched from 1600°C in a series of increasing dwell times. The results show that the conversion from the raw materials to the fresh melt proceeds in two kinetic stages. During the first stage (3–5 min), fast conversion of nearly 95% by mass occurs and the conversion coefficient increases in the order G < C ≈ A < B. The second stage is controlled by the slow dissolution of intermediate cr…
Modeling self-sustaining waves of exothermic dissolution in nanometric Ni-Al multilayers
2016
Abstract The self-sustained propagating reaction occurring in nanometric metallic multilayers was studied by means of molecular dynamics (MD) and numerical modeling. We focused on the phenomenon of the exothermic dissolution of one metallic reactant into the less refractory one, such as Ni into liquid Al. The exothermic character is directly related to a negative enthalpy of mixing. An analytical model based on the diffusion-limited dissolution [1] coupled with heat transfer was derived to account for the main aspects of the process. Together, several microscopic simulations were carried out. The first series were set up to obtain all the parameters governing the process, including the heat…
A comparative study on the compatibility of liquid lead–gold eutectic and liquid lead–bismuth eutectic with T91 and SS 316LN steels
2012
Abstract Liquid lead–gold eutectic (LGE) is considered as a potential target material for high power spallation sources. In the present work, the corrosion effects of LGE on T91 and SS 316LN steels have been investigated in comparison with that of liquid lead–bismuth eutectic (LBE) under the same testing conditions. Two tests were conducted at 400 °C for 1800 h and at 450 °C for 1300 h, in which specimens of the two steels were exposed to 1 m/s flowing LGE and LBE. Surface inspections showed that the specimens underwent a mixed corrosion mode of dissolution and oxidation. The results obtained from the SS 316LN specimens are very interesting. Firstly, EDX (electron energy dispersion X-ray sp…
Encapsulation and solid state sequestration of gases by calix[6]arene-based molecular containers
2017
Two calix[6]arene-based molecular containers were synthesized in high yields. These containers can encapsulate small guests through a unique "rotating door" complexation process. The sequestration of greenhouse gases is clearly demonstrated. They can be stored in the solid state for long periods and released via dissolution of the inclusion complex.
The behaviour of zirconium, hafnium and rare earth elements during the crystallisation of halite and other salt minerals
2017
Abstract Halite crystals from Messinian and Tortonian evaporites from Sicily and Spain and current precipitated halite crystals and the relative parent brines (active evaporation systems) were investigated in order to evaluate the Zr, Hf and Rare Earth Element (REE) behaviour. Halite crystallisation from evaporating brines fractionates Zr, Hf and REE through a two-step process. During the first step, dissolved complexes of studied elements are scavenged onto the surfaces of crystallising halite. During the second step, elements are co-precipitated into the crystal lattice as it grows. The first step mechanism is determined by the dissolved REE speciation. In saltworks where carbonate-REE co…
Zr/Hf ratio and REE behaviour: A coupled indication of lithogenic input in marginal basins and deep-sea brines
2019
Abstract The distribution of dissolved Zr, Hf and Rare Earth Elements (yttrium and lanthanides, hereafter referred to as REE) in the Eastern Mediterranean seawater column was measured in the Kryos basin to evaluate the lithogenic contribution from both Nile River and Sahara and Arabian desert dust. We found dissolved Zr/Hf ratios below the signature of crustal rocks and chondrites; a phenomenon likely driven by the dissolution of the Mn-rich coating of atmospheric dust particles delivered from the desert. In deeper waters, Zr/Hf ratios are clustered close to the signature of crustal rocks and chondrites according to the different Zr and Hf dissolved speciation. The Zr/Hf ratio observed in t…
Targeted delivery of hydrogen for the bioremediation of aquifers contaminated by dissolved chlorinated compounds.
2019
Dihydrogen (H2) gas injection is a promising option to enhance the reductive biodehalogenation of contaminants in groundwater. However, it is challenging to ensure its targeted delivery at the right places in plumes, and for the long times required for bioremediation. In this paper, the ability of surfactant foam to retain H2 in the saturated zone and to enhance its release in the dissolved form was compared to traditional biosparging. H2 gas was injected, either alone, or as foam, in a 2D saturated cell packed with glass beads. This cell was continuously flushed with deoxygenated water to mimic aquifer circulation, and H2 was studied both in terms of gas distribution in the cell and dissol…
Consolidation of earthen building materials: a comparative study
2019
The consolidation and protection of mud bricks are a challenge in the field of conservation of archeological sites. One of the solutions is represented by the coverage of the entire excavation that assures a protection against mud dissolution. Unfortunately, this is not always feasible, both for economical and practical issues. For these reasons, alternative solutions are needed. In this work, laboratory experimentation has been carried out in order to test the efficacy of some products to slow down the dissolution process and increase the brick toughness. Three typologies of raw materials taken from different outcrops (one from the Republic of Azerbaijan and two from Calabria region, Italy…
Spongy-like porosity in peritidal carbonates: An interaction of cyclic sea-level oscillations, fresh water supply and sediment texture
2016
Abstract This paper focuses upon the analysis of a complex paleokarstic system recorded within uppermost Triassic peritidal cycles in northwestern Sicily. Besides documenting spectacular karstification at the Triassic/Jurassic boundary, it provides an example of stratabound ‘spongy’ or ‘swiss-cheese’ dissolution. On the base of field observations, microfacies analysis, transmitted-light and cathodoluminescence petrography and stable-isotope analyses we put forward an original model for the formation of this peculiar stratabound dissolution. It implies a complex interaction of several controlling factors at the interface between the marine and meteoric diagenetic realms during the relative c…
Comparison of electropolishing behaviours of TSC, ALM and cast 316L stainless steel in H 3 PO 4 /H 2 SO 4
2017
Abstract In recent decades, new manufacturing processes have been developed such as Thermal Spray Coating (TSC) and Additive Layer Manufacturing (ALM), which reduce or avoid machining of parts with complex geometries. This study aims to develop an Electropolishing (EP) process for TSC and ALM 316L Stainless Steel (SS). EP is an anodic dissolution process currently used in industry to reduce surface roughness and obtain a bright and smooth finish. The EP mechanism was studied, in a mixture of H3PO4 and H2SO4, for TSC, ALM and “cast” SS in order to determine the best conditions (time, temperature, potential). Special attention was paid to surface characterization by combining several techniqu…