Search results for "Dissolution"
showing 10 items of 333 documents
Salt extraction from lime-based mortars: An experimental study using different poultice formulations
2020
Abstract The extractive capability of soluble salts in poultices treatments currently used in mortar conservation (ArbocelTM plus sepiolite; ArbocelTM, sepiolite and sand; Westox-Cocoon®) were tested to evaluate their efficiency and compatibility with specific mortar substrate. The pore size distribution of the experimental mortar substrate and of the blank dried poultices were preliminarily accomplished by mercury intrusion porosimetry (MIP). Desalination tests were carried out on specifically-formulated mortars after capillary absorption of Na2SO4 0.3 M solution. The efficiency of salt extraction was measured by means of electrical conductivity meter and ion chromatography. Among the test…
Fixed Bed Adsorption of Drugs on Silica Aerogel from Supercritical Carbon Dioxide Solutions
2013
Supercritical adsorption coupled with the high adsorption capacity of silica aerogel allows the preparation of a new kind of delivery systems of poor water soluble drugs. In order to overcome drawbacks of conventional techniques where the use of liquid solvents can cause the fracture of aerogel porous structure, in this work a new adsorption process of drugs from a supercritical mixture is proposed. Adsorption takes place from a fluid solution of the drug in supercritical CO2and ethanol as cosolvent. A fixed bed adsorption plant has been developed to allow fast mixing of fluid phase and effective contact in the adsorption column. The use of ethanol as cosolvent allows to overcome the limita…
Numerical modeling and validation of hydrothermal liquefaction of a lignin particle for biocrude production
2021
Abstract Lignin liquefaction process under catalyst-free conditions in a temperature range from 573 K to 647 K is investigated with this mathematical model. Based on the theoretical understanding of the physical and chemical processes of the liquefaction process in subcritical temperatures, a comprehensive mathematical model for the decomposition of lignin by hydrolysis reaction pathway is developed on the results of a series of batch experiments. The model consists of four main sections. They are liquefaction of lignin particle, oily film, and inorganic (ash) layer formation behavior during the liquefaction, kinetic model to model further liquefaction process of initial products, and the l…
Influence of the chemical dissolution of MnS inclusions on the composition of passive films and the local electrochemical behaviour of stainless stee…
2006
Abstract Immersion of stainless steel containing MnS inclusions in aqueous electrolytes leads to the chemical dissolution of these heterogeneities. Chemical dissolution of MnS inclusions in 1M NaCl, pH=3 was studied using in-situ AFM and the dissolution rate of MnS was estimated between 0.04 and 0.19 μm 3 /min. The local electrochemical measurements reveal that the chemical dissolution of MnS inclusions promotes pitting corrosion. Similary, chemical dissolution of MnS inclusions in IM NaClO 4 , pH=3 solution modified the surface close to the inclusions by the presence of FeSO 4 in the passive film.
Engineering of Nanofibrous Amorphous and Crystalline Solid Dispersions for Oral Drug Delivery
2018
Poor aqueous solubility (<0.1 mg/mL) affects a significant number of drugs currently on the market or under development. Several formulation strategies including salt formation, particle size reduction, and solid dispersion approaches have been employed with varied success. In this review, we focus primarily on the emerging trends in the generation of amorphous and micro/nano-crystalline solid dispersions using electrospinning to improve the dissolution rate and in turn the bioavailability of poorly water-soluble drugs. Electrospinning is a simple but versatile process that utilizes electrostatic forces to generate polymeric fibers and has been used for over 100 years to generate synthet…
Real-Time Monitoring of Intergranular Corrosion Damage on AA2024
2017
The total porosity induced by the intergranular corrosion was selected as a monitoring parameter to follow in real-time the defect propagation of AA2024. The pertinence of eddy current (EC) probing has been tested on very thin foils of AA2024 (30 μm in thickness) in immersion conditions under potentiostatic control and in atmospheric conditions simulated by controlled salt spray experiments. Combining this nondestructive evaluation technique with a direct optical interrogation of the backside of the test specimen (derived from the foil penetration technique) allows one to discuss the contribution of both the dissolution in the depth and along the grain boundaries to the total porosity. In i…
Ultrapure laser-synthesized Si nanoparticles with variable oxidation states for biomedical applications
2020
We employ a method of femtosecond laser fragmentation of preliminarily prepared water-dispersed microcolloids to fabricate aqueous solutions of ultrapure bare Si-based nanoparticles (Si-NPs) and assess their potential for biomedical applications. The nanoparticles appear spherical in shape, with low size dispersion and a controllable mean size, from a few nm to several tens of nm, while a negative surface charge (−35 mV ± 0.10 according to z-potential data) provides good electrostatic stabilization of colloidal Si-NP solutions. Structural analysis shows that the Si-NPs are composed of Si nanocrystals with inclusions of silicon oxide species, covered by a SiOx (1 < x < 2) shell, while the to…
Polycaprolactone/gelatin-based scaffolds with tailored performance: in vitro and in vivo validation
2019
Abstract Nanofibrous scaffolds composed of polycaprolactone (PCL) and gelatin (Ge) were obtained through a hydrolytic assisted electrospinning process. The PCL-to-Ge proportion (100/0 to 20/80), as well as the dissolution time (24, 48, 72, 96, 120 h) into a 1:1 formic/acetic acid solvent before electrospinning were modified to obtain the different samples. A strong influence of these factors on the physicochemical properties of the scaffolds was observed. Higher Ge percentage reduced crystallinity, allowed a uniform morphology and increased water contact angle. The increase in the dissolution time considerably reduced the molar mass and, subsequently, fibre diameter and crystallinity were a…
Silica-coated calcium pectinate beads for colonic drug delivery
2013
The aim of this work is to develop novel organic-inorganic hybrid beads for colonic drug delivery. For this purpose, calcium pectinate beads with theophylline are prepared by a cross-linking reaction between amidated low-methoxyl pectin and calcium ions. The beads are then covered with silica, starting from tetraethyoxysilane (TEOS), by a sol-gel process. The influence of TEOS concentration (0.25, 0.50, 0.75 and 1.00 M) during the process is studied in order to modulate the thickness of the silica layer around the pectinate beads and thus to control the drug release. The interactions between the silica coating and the organic beads are weak according to the physicochemical characterizations…
Electrochemical Behaviour and Galvanic Effects of Titanium Implants Coupled to Metallic Suprastructures in Artificial Saliva
2018
The aim of the present study is to analyze the electrochemical behavior of five different dental alloys: two cobalt-chromium alloys (CoCr and CoCr-c), one nickel-chromium-titanium alloy (NiCrTi), one gold-palladium alloy (Au), and one titanium alloy (Ti6Al4V), and the galvanic effect when they are coupled to titanium implants (TiG2). It was carried out by electrochemical techniques (open circuit measurements, potentiodynamic curves and Zero-Resistance Ammetry) in artificial saliva (AS), with and without fluorides in different acidic conditions. The studied alloys are spontaneously passivated, but NiCrTi alloy has a very narrow passive domain and losses its passivity in presence of fluorides…