Search results for "Dye-sensitized Solar Cell"
showing 10 items of 78 documents
Dynamic preparation of TiO2 films for fabrication of dye-sensitized solar cells
2006
Preparation of nanocrystalline porous titanium dioxide (TiO2) films with roll-to-roll compatible methods was studied. Gravure printing was used for spreading TiO2 paste and paper calendering for pressing TiO2 nanoparticle films. Influence of different preparation methods on performance of fabricated dye-sensitized solar cells (DSSCs) was investigated. The attained light into electricity conversion efficiency was compared with DSSCs fabricated on conductive plastic substrates by doctor-blading spreading with subsequent static pressing. The latter method achieved a light conversion efficiency as high as 5.1%. The efficiency of the cells with a gravure printed TiO2 film was found to be rather …
Electro-optical characterization of ruthenium-based dye sensitized solar cells: A study of light soaking, ageing and temperature effects
2017
Abstract In this work, we report on the electro-optical characterization of Dye Sensitized Solar Cells (DSSCs) which use ruthenium complexes as sensitizers. In particular, several kinds of measurements have been performed to study the electrical performances and the efficiency levels of the cells at different operating conditions. In detail, the measurements have been conducted at varying temperatures and hours of light soaking. Our results show that the short circuit current density J SC , the open circuit voltage V OC and the conversion efficiency η increase with the hours of light soaking, while they decrease with temperature. A thorough investigation on the light soaking process at the …
One diode circuital model of light soaking phenomena in Dye-Sensitized Solar Cells
2018
Abstract In this work, we report on the modelling of light soaking effect on Ruthenium-based Dye Sensitized Solar cells (DSSCs). Such a phenomenon can be detected when exposing the cells at increasing hours of illumination and produces a reversible performance increase. Starting from the results obtained through the electro-optical characterization of the cells, we applied a one-diode circuital-model. Our results show a good agreement between the experimental and the simulated data, with a mean square error in the order of 10−12 and a maximum error in current lower than 0.6%. Finally such results allowed us to infer some precise trends followed by the cells main electrical parameters and of…
Organic Dye Bearing Asymmetric Double Donor-π-Acceptor Chains for Dye-Sensitized Solar Cells
2011
A novel efficient metal free sensitizer containing asymmetric double donor-π-acceptor chains (DC) was synthesized for dye-sensitized solar cells (DSSCs). Comparing to 3.80%, 4.40% and 4.64% for the DSSCs based on the dyes with single chain (SC1, SC2) and cosensitizers (SC1 + SC2), the overall conversion efficiency reaches 6.06% for DC-sensitized solar cells as a result of its longer electron lifetime and higher incident monochromatic photon-to-current conversion efficiency.
Electrical and photoelectrical measurements on ZnO-Nanowires coated with PEDOT:PSS for Dye-Sensitized Solar Cells
2011
ABSTRACTDye-sensitized solar cells composed of an n-doped ZnO nanowire array and a p-doped polymer layer appears to be a promising candidate for low-cost production of environment-friendly solar cells. In this work, we investigate hybrid devices consisting of a transparent conducting oxide (TCO) substrate, ZnO-nanowires (ZnO-NW) or a sol-gel prepared ZnO layer, a ruthenium dye (N719) and a PEDOT:PSS or P3HT layer. The dense polycrystalline ZnO layer is able to prevent short circuits, which have a strong effect on the performance of the solar cells. This is demonstrated by the use of only the ZnO layer which improves the open circuit voltage by a factor of 2 and the efficiency by a factor of…
2,3-Dipentyldithieno[3,2-f:2′,3′-h]quinoxaline-Based Organic Dyes for Efficient Dye-Sensitized Solar Cells: Effect of π-Bridges and Electron Donors o…
2015
Five novel metal-free organic dyes DQ1-5 containing a dipentyldithieno[3,2-f:2',3'-h]quinoxaline (DPQ) unit were synthesized and applied in dye-sensitized solar cells (DSSCs), where DPQ was employed as a π-spacer for the first time. Their photophysical, electrochemical, and theoretical calculations and photovoltaic properties were systematically investigated. All the five dyes show broad photoresponse. Especially the absorption edges of DQ3-5 extend to 800 nm on the TiO2 films. The inserted electron-rich unit 3,4-ethylenedioxythiophene or electron-withdrawing group benzothiadiazole (BTD) in DPQ-based dyes can greatly influence the optoelectronic properties of the dyes. In addition, the diff…
Synthesis and characterization of zinc carboxy–porphyrin complexes for dye sensitized solar cells
2018
Two zinc porphyrins, 2 and 8, have been synthesized. Porphyrin 8 displays better electronic communication between the dye and the TiO2 electrode. Photophysical measurements and electrochemistry experiments suggest that both porphyrins are very promising sensitizers for dye-sensitized solar cells (DSSCs). It was found that their molecular orbital energy levels favor electron injection and dye regeneration in DSSCs. Solar cells sensitized by 2 and 8 were fabricated, and it was found that they show power conversion efficiencies (PCEs) of 5.27% and 7.13%, respectively. Photovoltaic measurements (J–V curves) together with the incident photon-to-electron conversion efficiency spectra of the two c…
Energy Optimization of BIPV Glass Blocks: a Multi-software Study
2017
Abstract The aim of this paper is to show the results of the performance analyses carried out on four patented glass block configurations integrated with third-generation Dye-sensitized Solar Cell (DSC) modules. The analyses take into account the thermal, optical and electrical performance by using three different software (COMSOL Multiphysics, WINDOW, Zemax), also enabling to take into consideration the peculiar three-dimensional geometry of this innovative glazed product. Starting from these results, new configurations improved as for the thermal insulation, are also introduced and studied, in order to make further considerations about the applicability of this building component for the …
Comparison on the use of PV systems in the vertical walls
2015
In this article the preliminary evaluation of the performance of a photovoltaic window is presented. The aim is to trace the behavior of next-generation systems, which favor architectonical integration. Three different systems have been taken into account: a dye sensitized solar cell (DSSC), blue and grey caved silicon panels. The systems can be placed behind a window or behind a wall of glass blocks.
DSSC-integrated Glassblocks for the construction of Sustainable Building Envelopes
2014
The paper shows the first results of the optical performance analysis carried out on the DSSC integrated glassblock, an innovative building product developed at the Department of Architecture of the University of Palermo. In the field of a research that is being conducted in order to define innovative solutions for the construction of photovoltaic and energy efficient translucent building envelopes, different hypotheses of integration of DSSC into the glassblock have been foreseen. The integration of glassblock with third generation PV systems allows to define a novel building-PV product that meets the current requirements of the BIPV (Building Integrated Photovoltaics) market. By means of …