Search results for "Dynamic"

Computer simulations of undercooled fluids and the glass transition

2000

Abstract Two model studies are presented that attempt to describe the static and dynamic properties of glass-forming fluids via molecular dynamics simulations: The first model is an atomistically realistic model of SiO 2 , the second model provides a coarse-grained description of polymer liquids, i.e., typical `fragile' glassformers, while SiO 2 is the prototype of a `strong glassformer'. For both models, attention is given to the questions as to which range of temperatures are properties in equilibrium, and whether such simulations can help to interpret experiments and/or check theoretical predictions. While in the simulation of SiO 2 using the potential of van Beest, Kramer and van Santen…

The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA

2012

Abstract Silica–PMMA nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1–5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of PMMA was investigated by means of transmission electron microscopy (TEM), X-ray diffractometry (XRD), dynamic mechanical analysis (DMA), thermogravimetric analyses (TGA), Fourier-transform infrared spectroscopy (FTIR), 13 C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy ( 13 C{ 1 H} CP-MAS NMR) and measures of proton spin-lattice relaxation time in the rotating frame ( T 1 ρ ( H )), in the laboratory frame ( T 1 ( H )) a…

Nonisothermal elongational behavior of blends with liquid crystalline polymers

1994

Measurements of melt strength and breaking stretching ratio of several blends of thermoplastic polymers with liquid crystalline polymers are presented. The melt strength behavior depends not only on the viscosity of the blends but also on the temperature dependence of the viscosity. In particular, even if the viscosities of the blends are, at the extrusion temperature, lower than that of the thermoplastic matrices, the melt strength can be larger than that of the pure thermoplastics if its viscosity-temperature curve exceeds that of the matrices far from the solidification temperature. This behavior allows one to spin or film blow these blends despite the low viscosity.

Shear flow characterization of blends containing liquid crystal polymers

1992

A simple phenomenological approach is proposed in order to predict the presence of minima in the viscosity-composition curves of blends of thermoplastic with liquid crystal polymer (LCP). When the viscosity of the liquid crystal polymer is larger than that of the thermoplastic matrix, a minimum is observed. A possible explanation of the presence of yield stress in the flow curves of these blends is also given.

Synthesis of reactive hyperbranched and star-like polyethers and their use for toughening of vinylester–urethane hybrid resins

2004

A vinylester – urethane hybrid resin (VEUH) was toughened by adding various vinyl-functionalized branched polyethers in 10 and 20 wt%. Two sets of hyperbranched polymers (HBPs) with different branching density were compared with a set of six-arm star polymers. Besides the architecture, the polymers also varied in their characteristics (molecular mass and mass distribution, vinyl/hydroxy ratio). The morphology of the modified VEUH was studied by dynamic-mechanical thermal analysis (DMTA), transmission (TEM) and scanning electron microscopy (SEM). The toughness was characterized by the fracture energy ðGcÞ determined on compact tension specimens at room temperature. It was established that th…

Mode I fracture toughness behavior of hydro-thermally aged carbon fibre reinforced DGEBA-HHPA-PES systems

2012

In this work the Mode I fracture toughness behavior of unidirectional CFRP laminates is investigated by means of Double Cantilever Beam (DCB) tests. The composite samples were manufactured by thermal curing after impregnation of a Carbon fabric with a DGEBA epoxy and anhydride HHPA curing agent. One resin batch was also mixed with a PES thermoplastic monomer to enhance the matrix toughness. Two lots of samples, toughened and un-toughened, were then left to soak in hot water to achieve various degrees of aging. The influence of matrix toughening and hydrothermal aging on the delamination behavior of the composite have then been assessed and correlated with characterization data from Dynamic …

Time–carbonyl groups equivalence in photo-oxidative aging of virgin/recycled polymer blends

2004

AbstractThe photo-oxidation behaviour of polymers is strongly dependent on the initial amount of carbonyl groups along the chains. The growing use of recycled post-consumer polymers coming from products used outdoors and then photo-oxidised, both pure and blended with the same virgin polymer, gives rise to an unpredictable behaviour of weathering resistance of products made with these materials. The present work shows that the carbonyl group–exposure time curves can be shifted along the time axis to give a single generalised master plot. It is then possible to predict the formation of the new carbonyl groups by knowing only the initial amount of the same carbonyl groups. The same shift fact…

1979

Pressure influences on the viscosity of polymer solutions

1982

Of all physico-chemical quantities characterizing the behavior of liquids, the viscosity coefficient η is normally most sensitive to pressure. Early measurements of η(p) date back almost 100 years [1] but they were carried out with very different objectives [2]. Currently, one is particularly interested in polymer solutions, for instance because of the additives to motor oils and of oil recovery. The present paper reports on measurements with polystyrenes of high molecular uniformity in eight different solvents. It confines itself to zero-shear viscosities and discusses the possibilities of discovering the influence of pressure via the molecular structure of the solvent and via its thermody…

Experimental organic matter maturation at 2kbar: Heat-up effect to low temperatures on vitrinite reflectance

2012

Abstract An experimental study was performed to evaluate the effect of heat-up to various low temperatures on vitrinite reflectance ( VR ) at 2 kbar employing the same previously used heat-up procedures, starting material and apparatus. Heat-up is the isobaric experimental procedure consisting of the increase in temperature of the laboratory vitrinite maturation from room temperature to the desired run temperature T end of heat-up at which the isobaric-isothermal maturation starts. Experiments employed cold-seal pressure vessels with classical heat-up devices and were carried out on wet (water added) xylite of swamp cypress. Confined system maturation experiments were conducted at 2 kbar an…