Search results for "END"
showing 10 items of 32899 documents
Experimental framework of traveling trolley with swinging load for hybrid motion control
2018
A novel experimental framework of the traveling trolley with swinging load is proposed. The system is designed as a controlled moving cart with pendulum for investigation of the hybrid motion control methods, involving the discrete sensors and impulsive event-based state observations and control actions. A mechatronic approach of principal system design, modeling, and identification are provided together with a motion control of the cart and simple event-based control of a-priori unknown final position. The coupled motion dynamics is analyzed and evaluated by using the discrete sensors, along with the control results.
Automatic Take Off and Landing for UAS Flying in Turbulent Air - An EKF Based Procedure
2020
An innovative use of the Extended Kalman Filter (EKF) is proposed to perform automatic take off and landing by the rejection of disturbances due to turbulence. By using two simultaneously working Extended Kalman Filters, a procedure is implemented: the first filter, by using measurements gathered in turbulent air, estimates wind components; the second one, by using the estimated disturbances, obtains command laws that are able to reject disturbances. The fundamental innovation of such a procedure consists in the fact that the covariance matrices of process (Q) and measurement (R) noise are not treated as filter design parameters. In this way determined optimal values of the aforementioned m…
Using an Adaptive High-Gain Extended Kalman Filter With a Car Efficiency Model
2010
The authors apply the Adaptive High-Gain Extended Kalman Filter (AEKF) to the problem of estimating engine efficiency with data gathered from normal driving. The AEKF is an extension of the traditional Kalman Filter that allows the filter to be reactive to perturbations without sacrificing noise filtering. An observability normal form of the engine efficiency model is developed for the AEKF. The continuous-discrete AEKF is presented along with strategies for dealing with asynchronous data. Empiric test results are presented and contrasted with EKF-derived results.Copyright © 2010 by ASME
An Additive Model to Predict the Rheological and Mechanical Properties of Polypropylene Blends Made by Virgin and Reprocessed Components
2021
In this work, an additive model for the prediction of the rheological and mechanical properties of monopolymer blends made by virgin and reprocessed components is proposed. A polypropylene sample has been reprocessed more times in an extruder and monopolymer blends have been prepared by simulating an industrial process. The scraps are exposed to regrinding and are melt reprocessed before mixing with the virgin polymer. The reprocessed polymer is, then, subjected to some thermomechanical degradation. Rheological and mechanical experimental data have been compared with the theoretical predictions. The results obtained showed that the values of this simple additive model are a very good fit fo…
Innovative method to estimate state of charge of the hydride hydrogen tank: application of fuel cell electric vehicles
2021
International audience; Significant attention has been paid to metal hydrides (MH) as an environmentally friendly and safe way to store hydrogen. This technology has considerable potential for the application of embedded hydrogen storage in fuel cell electric vehicles, but its widespread application faces a major problem in terms of estimating the remaining hydrogen amount in the tank. In this work, a new method is proposed for estimating the state of charge (SoC) of the hydrogen hydride tank (HHT) by application of piezoelectric material. The idea is to cover the entire inner wall of the metal-hydride tank with a layer of piezoelectric material. During the process of hydrogen absorption, t…
Interrogating witnesses for geometric constraint solving
2012
International audience; Classically, geometric constraint solvers use graph-based methods to decompose systems of geometric constraints. These methods have intrinsic limitations, which the witness method overcomes; a witness is a solution of a variant of the system. This paper details the computation of a basis of the vector space of free infinitesimal motions of a typical witness, and explains how to use this basis to interrogate the witness for dependence detection. The paper shows that the witness method detects all kinds of dependences: structural dependences already detectable by graph-based methods, but also non-structural dependences, due to known or unknown geometric theorems, which…
Improved Active Disturbance Rejection Control for Trajectory Tracking Control of Lower Limb Robotic Rehabilitation Exoskeleton.
2020
Neurological disorders such as cerebral paralysis, spinal cord injuries[acronym](SCI), and strokes, result in the impairment of motor control and induce functional difficulties to human beings like walking, standing, etc. Physical injuries due to accidents and muscular weaknesses caused by aging [english]affectsaffect people and can cause them to lose their ability to perform daily routine functions. In order to help people recover or improve their dysfunctional activities and quality of life after accidents or strokes, assistive devices like exoskeletons and orthoses are developed. Control strategies for control of exoskeletons are developed with the desired intention of improving the qual…
Estimation of Sway-angle Based on Hybrid State Observer Using Continuous and Discrete Sensing
2019
A hybrid state observer design is presented herein to estimate sway-angle and angular velocity in trolley systems with pendulum. In general, anti-sway control for trolley systems with pendulum such as overhead cranes are designed based on sway-angle signals detected by angular sensors. Opposed to that, a state observer without those sensors is proposed to estimate the sway-angle of the pendulum. A standard linear continuous feedback observer causes estimation error owing to the system nonlinearity and modeling error. This paper proposes a hybrid state observer incorporating discrete sensor signals. In the hybrid state observer, the estimation performance is improved by correcting the state …
Assessing the accuracy of industrial robots through metrology for the enhancement of automated non-destructive testing
2016
This work presents the study of the accuracy of an industrial robot KR5 arc HW, used to perform quality inspections of components with complex shapes. Metrology techniques such as laser tracking and large volume photogrammetry were deployed to quantify both pose and dynamic path accuracies of the robot in accordance with ISO 9283:1998. The overall positioning pose inaccuracy of the robot is found to be almost 1 mm and path inaccuracy at 100% of the robot rated velocity is 4.5 mm. The maximum pose orientation inaccuracy is found to be 14 degrees and the maximum path orientation inaccuracy is 5 degrees. Despite of the significant maximum inaccuracies, uncertainty of a robotic scanning applica…
Registration of Surfaces Minimizing Error Propagation for a One-Shot Multi-Slit Hand-Held Scanner
2008
We propose an algorithm for the on-line automatic registration of multiple 3D surfaces acquired in a sequence by a new hand-held laser scanner. The laser emitter is coupled with an optical lens that spreads the light forming 19 parallel slits that are projected to the scene and acquired with subpixel accuracy by a camera. Splines are used to interpolate the acquired profiles to increase the sample of points and Delaunay triangulation is used to obtain the normal vectors at every point. A point-to-plane pair-wise registration method is proposed to align the surfaces in pairs while they are acquired, conforming paths and eventually cycles that are minimized once detected. The algorithm is spe…