Search results for "Elastic Modulu"
showing 10 items of 189 documents
Correlation between processability and properties of a high density polyethylene by a rheological approach
2002
The thermal-oxidative and thermal-mechanical stability of high density polyethylene (chromium based catalyst technology) was examined at many different temperatures using a rheological approach. The changes in molecular structure, which take place during processing, have been studied using a Clextral co-rotating twin-screw extruder in comparison with dynamic measurements performed with a rotational rheometer under definite conditions of temperature, strain and frequency and in presence of air. In order to evaluate the degradation response, an investigation of elastic modulus G' as a function of frequency ω on the residual sample after ageing has been carried out. The molecular weight increa…
The effect of partial exfoliation of multilayer silicate filler particles on the elastic properties of a polymer composite
2018
Abstract A method for stepwise calculation the elastic constants of a three-phase composite, including the polymer matrix, the fully exfoliated silicate nanolayers and the platelike silicate particles in the form of multilayer intercalated stacks is considered. A theoretical analysis is carried out by using the Mori–Tanaka theory of an equivalent medium. The influence of degree of exfoliation (the ratio of exfoliated filler content to the total filler content) on the reinforcing efficiency is studied and discussed. A comparative analysis of experimental data of elastic modulus for a rigid polyurethane/montmorillonite composite and prediction results is carried out. It is shown, that with gr…
Mechanical behaviour of Mater-Bi/wood flour composites: a statistical approach
2008
Interest in biocomposites (lignocellulosic filled biopolymers) started in the 90s, due to environmental advantages, related to the full biodegradability of both matrix and filler, economical issues (organic fillers usually come from sawmill or agriculture wastes) and aesthetical issues (wood filled biopolymers could be particularly pleasant if used for indoor furnishing and automotive interior). In this work, a method for a systematic study of the properties of Mater-Bi®/wood flour composites is presented. A two-level full factorial model was built. It allows investigating the effects of multiple operative variables on the observed properties, their contributions, their optimal combinations…
Injectable in situ forming hydrogels based on natural and synthetic polymers for potential application in cartilage repair
2015
In this work we prepared two new hyaluronic acid (HA) based in situ forming hydrogels for the potential treatment of articular cartilage damages. In particular the amino derivative of HA (HA-EDA) and its graft copolymer with α-elastin (HA-EDA-g-α-elastin) were crosslinked, in mild physiological conditions via Michael-type addition, with α,β-poly(N-2-hydroxyethyl)-dl-aspartamide (PHEA) derivatized with divinylsulfone (DV). The swelling and degradation profile of the obtained hydrogels as well as the metabolic activity of incorporated bovine articular chondrocytes were investigated. Histological analysis and scanning electron microscopy (SEM) were performed to analyze the morphology of cells …
Nematic elastomers: From a microscopic model to macroscopic elasticity theory
2008
A Landau theory is constructed for the gelation transition in cross-linked polymer systems possessing spontaneous nematic ordering, based on symmetry principles and the concept of an order parameter for the amorphous solid state. This theory is substantiated with help of a simple microscopic model of cross-linked dimers. Minimization of the Landau free energy in the presence of nematic order yields the neoclassical theory of the elasticity of nematic elastomers and, in the isotropic limit, the classical theory of isotropic elasticity. These phenomenological theories of elasticity are thereby derived from a microscopic model, and it is furthermore demonstrated that they are universal mean-fi…
Elastic Properties of Liquid Crystal Elastomer Balloons
2001
We introduce a method to measure elastic properties of smectic liquid crystalline elastomers. Freely suspended smectic polymer films containing photoreactive groups are inflated to spherical bubbles and crosslinked by UV light irradiation. After crosslinking, the balloon volume is varied and elastic properties of the material are determined from the relation between radius and inner excess pressure. The influence of the network topology on the elastic behaviour is discussed.
Disentangling the Role of Chain Conformation on the Mechanics of Polymer Tethered Particle Materials
2019
[Image: see text] The linear elastic properties of isotropic materials of polymer tethered nanoparticles (NPs) are evaluated using noncontact Brillouin light spectroscopy. While the mechanical properties of dense brush materials follow predicted trends with NP composition, a surprising increase in elastic moduli is observed in the case of sparsely grafted particle systems at approximately equal NP filling ratio. Complementary molecular dynamics simulations reveal that the stiffening is caused by the coil-like conformations of the grafted chains, which lead to stronger polymer–polymer interactions compared to densely grafted NPs with short chains. Our results point to novel opportunities to …
Modeling and stress-strain characteristics of the mechanical properties of carbon-nanotube-reinforced poly(vinyl acetate) nanocomposites
2011
Polymer/carbon nanotube (CNT) composites are one of the most perspective advanced materials developed in recent years. The properties of CNT-reinforced polymer composites, however, strongly depend on structural aspects of the nanostructured filler and on its dispersion quality in a polymer matrix. Consequently, this research was devoted to the investigation of multiwalled-CNT-modified poly(vinyl acetate) (PVAc) composites with respect to the mechanical property dependence on some structural characteristics of CNTs. PVAc/CNT nanocomposites were obtained with a solution casting technique. The amount of CNTs was changed from 0.01 up to 2 wt %. The stress–strain characteristics of PVAc/CNT nano…
Compatibilization of polyethylene/polyamide 6 blend nanocomposite films
2015
Polymer blends of incompatible components need to undergo compatibilization, in order to give rise to a blend with good physical properties. At the same way, polymer/clay nanocomposites show this problem because of different chemical nature of the polymer matrix and of the clay. Compatibilization is therefore more necessary if an incompatible polymer blend is filled with an organomodified clay in order to give a final material with good properties. In this work, a polyethylene/polyamide 6 blend filled with an organomodified clay has been compatibilized with a maleic anhydride grafted SEBS (styrene-ethylene-butylene-styrene) copolymer and a glicidylmethacrylate-ethylene copolymer. The result…
Accurately evaluating Young’s modulus of polymers through nanoindentations: a phenomenological correction factor to the Oliver and Pharr procedure
2006
The Oliver and Pharr [J. Mater. Res. 7, 1564 (1992)] procedure is a widely used tool to analyze nanoindentation force curves obtained on metals or ceramics. Its application to polymers is, however, difficult, as Young’s moduli are commonly overestimated mainly because of viscoelastic effects and pileup. However, polymers spanning a large range of morphologies have been used in this work to introduce a phenomenological correction factor. It depends on indenter geometry: sets of calibration indentations have to be performed on some polymers with known elastic moduli to characterize each indenter.