Search results for "Elea"

showing 10 items of 772 documents

Evolution of the sp2 content and revealed multilayer growth of amorphous hydrogenated carbon (a-C:H) films on selected thermoplastic materials

2017

Amorphous hydrogenated carbon (a-C:H) films were gradually deposited on high-density polyethylene (HDPE), polyethylene terephthalate (PET) and polyoxymethylene (POM) via an indirect (f-type) and a direct (r-type) plasma-enhanced chemical vapor deposition (PECVD) process with acetylene plasma. The surface morphologies of the thicker r-depositions on the three different thermoplastics have been analyzed by atomic force microscopy (AFM) at varying micrometer scales. Absorbance spectroscopy has been used to characterize the optical properties of all coatings. Intrinsic stress release phenomena are revealed on thicker layers through the detection of characteristic surface corrugations. Based on …

Materials science02 engineering and technologyChemical vapor deposition01 natural sciencesContact anglechemistry.chemical_compoundPlasma-enhanced chemical vapor depositionSurface corrugation0103 physical sciencesPolyethylene terephthalateGeneral Materials ScienceComposite materialStress release phenomenaTauc gap010302 applied physicsPolyoxymethyleneChemistry (all)Settore FIS/01 - Fisica SperimentaleGeneral Chemistry021001 nanoscience & nanotechnologyDifferent sp2 clusterAmorphous solidDiamond-like carbon (DLC)chemistryHigh-density polyethylene0210 nano-technologyLayer (electronics)Carbon
researchProduct

2020

For medical application, easily accessible biomaterials with tailored properties are desirable. Collagen type I represents a biomaterial of choice for regenerative medicine and tissue engineering. Here, we present a simple method to modify the properties of collagen and to generate collagen laminates. We selected three commercially available collagen sheets with different thicknesses and densities and examined the effect of rose bengal and green light collagen crosslinking (RGX) on properties such as microstructure, swelling degree, mechanical stability, cell compatibility and drug release. The highest impact of RGX was measured for Atelocollagen, for which the swelling degree was reduced f…

Materials science0206 medical engineering02 engineering and technologyCatalysisInorganic Chemistrychemistry.chemical_compoundTissue engineeringRose bengalmedicinePhysical and Theoretical ChemistryComposite materialMolecular BiologySpectroscopyOrganic ChemistryBiomaterialGeneral Medicine021001 nanoscience & nanotechnologyMicrostructure020601 biomedical engineeringComputer Science ApplicationschemistryMechanical stabilityCovalent bondDrug releaseSwellingmedicine.symptom0210 nano-technologyInternational Journal of Molecular Sciences
researchProduct

Influence of different parameters on drug release from hydrogel systems to a biomembrane model. Evaluation by differential scanning calorimetry techn…

2000

A comparative study on the drug release capacity of four water swellable polymeric systems was carried out by differential scanning calorimetry (DSC). The polymeric systems chosen were alpha,beta-polyaspartahydrazide (PAHy) crosslinked by glutaraldehyde (GLU) (PAHy-GLU) or by ethyleneglycoldiglycidylether (EGDGE), (PAHy-EGDGE), polyvinylalcohol (PVA) crosslinked by glutaraldehyde (PVA-GLU) and alpha,beta-poly(N-hydroxyethyl)-DL-aspartamide (PHEA) by gamma irradiation (PHEA-gamma matrices). The degree of crosslinking for PAHy-GLU, PAHy-EGDGE and PVA-GLU samples was about 0.4 and 0.8. These hydrogels were characterized as free of drugs and were loaded with diflunisal (DFN) (approximately 2.5%…

Materials science12-DipalmitoylphosphatidylcholinePolymersBiophysicsDiflunisalBioengineeringBiocompatible Materialsmacromolecular substancesBiomaterialschemistry.chemical_compoundDifferential scanning calorimetryDrug Delivery SystemsPolymer chemistryMaterials TestingmedicinePolyhydroxyethyl MethacrylateLiposomeCalorimetry Differential ScanningEpoxy ResinsVesicletechnology industry and agricultureHydrogelsMembranes ArtificialDiflunisalControlled releaseNylonsCross-Linking ReagentsHydrazineschemistryChemical engineeringMechanics of MaterialsGlutaralDipalmitoylphosphatidylcholineDelayed-Action PreparationsPolyvinyl AlcoholSelf-healing hydrogelsLiposomesCeramics and CompositesGlutaraldehydemedicine.drug
researchProduct

Not always what closes best opens better: mesoporous nanoparticles capped with organic gates

2019

ABSTRACT Four types of calcined MCM-41 silica nanoparticles, loaded with dyes and capped with different gating ensembles are prepared and characterized. N1 and N2 nanoparticles are loaded with rhodamine 6G and capped with bulky poly(ethylene glycol) derivatives bearing ester groups (1 and 2). N3-N4 nanoparticles are loaded with sulforhodamine B and capped with self-immolative derivatives bearing ester moieties. In the absence of esterase enzyme negligible cargo release from N1, N3 and N4 nanoparticles is observed whereas a remarkable release for N2 is obtained most likely due to the formation of an irregular coating on the outer surface of the nanoparticles. In contrast, a marked delivery i…

Materials science102 Porous / Nanoporous / Nanostructured materialslcsh:BiotechnologyNanoparticle02 engineering and technologyGating010402 general chemistryEngineering and Structural Materials01 natural scienceslaw.inventionSilica nanoparticlesRhodamine 6Gchemistry.chemical_compoundlaw10 Engineering and Structural materialslcsh:TP248.13-248.65lcsh:TA401-492General Materials ScienceCalcinationgated nanodevices021001 nanoscience & nanotechnologyesterase controlled release0104 chemical sciencesChemical engineeringchemistrylcsh:Materials of engineering and construction. Mechanics of materials0210 nano-technologyMesoporous materialmesoporous nanoparticles
researchProduct

Rheological characterization and release properties of inulin-based hydrogels

2012

Abstract In the present study the rheological properties of hydrogels obtained through UV irradiation of an aqueous solution of methacrylated inulin (INUMA) alone or in the presence of four different crosslinkers, have been recorded as a function of irradiation time, at two different wavelengths (320 and 365 nm) and fixed frequency and amplitude by oscillatory experiments. Each hydrogel has been analyzed by measurements of the frequency-dependency of the elastic modulus, G ′, in the linear viscoelastic region. The amount of polymeric chains giving an elastic response has been correlated to the chemical nature of the crosslinker used together with INUMA. Finally the release properties of the…

Materials scienceAqueous solutionPolymers and PlasticsOrganic ChemistryInulininulin hydrogelsInulinUV irradiationYoung's modulusDrug releaseViscoelasticityChemical hydrogelschemistry.chemical_compoundsymbols.namesakechemistryRheologySelf-healing hydrogelsMaterials ChemistrysymbolsIrradiationComposite materialElastic modulusRheological measurements
researchProduct

Red-Light-Controlled Release of Drug-Ru Complex Conjugates from Metallopolymer Micelles for Phototherapy in Hypoxic Tumor Environments

2018

Traditional photodynamic phototherapy is not efficient for anticancer treatment because solid tumors have a hypoxic microenvironment. The development of photoactivated chemotherapy based on photoresponsive polymers that can be activated by light in the “therapeutic window” would enable new approaches for basic research and allow for anticancer phototherapy in hypoxic conditions. This work synthesizes a novel Ru‐containing block copolymer for photoactivated chemotherapy in hypoxic tumor environment. The polymer has a hydrophilic poly(ethylene glycol) block and a hydrophobic Ru‐containing block, which contains red‐light‐cleavable (650–680 nm) drug–Ru complex conjugates. The block copolymer se…

Materials scienceBiocompatibility02 engineering and technology010402 general chemistry01 natural sciencesMicelleBiomaterialschemistry.chemical_compoundElectrochemistryCopolymerrutheniumchemistry.chemical_classificationhypoxic tumorsPolymermetallopolymers021001 nanoscience & nanotechnologyCondensed Matter PhysicsControlled release0104 chemical sciencesElectronic Optical and Magnetic Materialsred lightchemistryCancer cellBiophysics0210 nano-technologyEthylene glycolConjugatephototherapy
researchProduct

Mechanical characterization of rose bengal and green light crosslinked collagen scaffolds for regenerative medicine

2021

Abstract Collagen is one of the most important biomaterials for tissue engineering approaches. Despite its excellent biocompatibility, it shows the non-negligible disadvantage of poor mechanical stability. Photochemical crosslinking with rose bengal and green light (RGX) is an appropriate method to improve this property. The development of collagen laminates is helpful for further adjustment of the mechanical properties as well as the controlled release of incorporated substances. In this study, we investigate the impact of crosslinking and layering of two different collagen scaffolds on the swelling behavior and mechanical behavior in micro tensile tests to obtain information on its wearin…

Materials scienceBiocompatibilitythickness analysiscollagen type Imicro tensile testingModulusControlled releaseBiomaterialscollagen laminatescell–collagen interactionsTissue engineeringrose bengal and green light crosslinkingUltimate tensile strengthmedicineAcademicSubjects/SCI01410Swellingmedicine.symptomElongationComposite materialDuctilityAcademicSubjects/MED00010Research ArticleRegenerative Biomaterials
researchProduct

Nanostructured Lipid Carriers-Containing Anticancer Compounds: Preparation, Characterization, and Cytotoxicity Studies

2007

This article describes the development of nanostructured lipid carriers (NLC) as colloidal carriers for two antitumor compounds that possess a remarkable antineoplastic activity. But their limited stability and low solubility in water could give a very low parenteral bioavailability. Results revealed an enhancement of the cytotoxicity effect of drug-loaded NLC on human prostate cancer (PC-3) and human hepatocellular carcinoma (HuH-6, HuH-7) cell lines with respect to that of both free drugs. Results of characterization studies strongly support the potential application of these drugs-loaded NLC as prolonged delivery systems for lipophilic drugs by several administration routes, in particula…

Materials scienceCell SurvivalDrug CompoundingPharmaceutical ScienceNanoparticleAntineoplastic AgentsPharmacologynanostructured lipid carrierHuman prostatehuman prostate carcinoma cellPlasmaCell Line TumorElectrochemistryHumansParticle SizeSolubilityCytotoxicityChromatography High Pressure LiquidDrug CarriersGeneral Medicineantitumor drugLipidsControlled releaseBioavailabilitySolubilityPlasma chemistryNanoparticleshuman hepatocellular carcinoma cellcontrolled releaseDrug metabolism
researchProduct

Performance of Multilayered Particles: Influence of a Thin Cushioning Layer

2005

Nowadays, oral dosage forms with controlled release kinetics have known an increasing interest. The polymer coating of drug-loaded particles is one of the most common methods used for controlling drug delivery. Such multilayered particles could be either filled into capsules or compressed into tablets for their oral administration. However, many studies have noticed that coating films are damaged during the compression process, leading to significant changes in drug release profiles. The aims of this study were to investigate the effects of a thin cushioning layer [made of HydroxyPropylMethyl Cellulose (HPMC)] applied on coated theophylline particles upon particle characteristics, tablet pr…

Materials scienceChemistry PharmaceuticalDrug CompoundingPharmaceutical ScienceExcipientMethylcelluloseengineering.materialDosage formExcipientsHypromellose DerivativesTheophyllineCoatingDrug DiscoverymedicineComposite materialCellulosePharmacologyOrganic ChemistryCushioningControlled releaseSolubilityDrug deliveryengineeringParticleTablets Enteric-CoatedLayer (electronics)medicine.drugDrug Development and Industrial Pharmacy
researchProduct

Nanocapsules with specific targeting and release properties using miniemulsion polymerization.

2013

The field of application for nanosized materials ranges from mere technical purposes to a growing field of applications in biomedicine. Among the different techniques and processes to produce these materials for encapsulation of reporter molecules and drugs, the miniemulsion process has been proven to be highly adaptable to these specific needs.The review covers the recent developments in the field of miniemulsion as a very powerful technique for the formation of complex carriers for the encapsulation of different kinds of reporter molecule and drugs. The use of a wide variety of polymerization techniques in the miniemulsion process and possible utilization of a wide range of monomers as re…

Materials scienceChemistry PharmaceuticalPharmaceutical ScienceNanotechnologyMagnetic Resonance ImagingNanocapsulesNanostructuresMiniemulsionchemistry.chemical_compoundMonomerDrug Delivery SystemschemistryPolymerizationNanocapsulesPharmaceutical PreparationsDrug deliveryDrug releaseSurface modificationOrganic chemistryAnimalsHumansNanoparticlesEmulsionsMolecular Targeted TherapyHydrophobic and Hydrophilic InteractionsExpert opinion on drug delivery
researchProduct