Search results for "Electric current"

Characterisation of cw Nd : YAG laser keyhole dynamics

2001

Abstract The paper concerns laser–matter interaction characterisation. In this work, we use a rapid CCD camera located coaxially to the laser beam and we compare recorded images with those obtained by numerical modelling. Because images are difficult to understand, we compute thermal radiation emitted by a keyhole of fixed geometry and we adjust it trying to approach the camera record. The modelling treats radiative heat transfer within the keyhole and determines the sensor illumination map. By adjusting the geometrical characteristics of the hole, we seek to obtain the image that corresponds as well as possible to the realised experiment. Results are compared with other experimental method…

Local Metamaterial-Based Waveguides in Gaps Between Parallel Metal Plates

2009

This letter presents a new metamaterial-based waveguide technology referred to as ridge gap waveguides. The main advantages of the ridge gap waveguides compared to hollow waveguides are that they are planar and much cheaper to manufacture, in particular at high frequencies such as for millimeter and sub- millimeter waves. The latter is due to the fact that there are no mechanical joints across which electric currents must float. The gap waveguides have lower losses than microstrip lines, and they are completely shielded by metal so no additional packaging is needed, in contrast to the severe packaging problems associated with microstrip circuits. The gap waveguides are realized in a narrow …

A Simple Model for Ac Impedance Spectra in Bipolar Membranes

1996

A new model accounting for the ac impedance spectra of synthetic ion-exchange bipolar membranes is presented. The theoretical approach is based on the Nernst−Planck and Poisson equations and applies some of the concepts used in the semiconductor pn junctions to the case of a bipolar membrane. The results presented are the current−voltage curves and the impedance spectra at electric currents above the limiting current. It is shown that the model is able to identify the main contributions to the bipolar membrane impedance and gives valuable information about the bipolar junction structure and its influence on the characteristic parameters involved in the field-enhanced water dissociation phen…

1997

A bipolar membrane (BM) is a layered structure composed of one cation and one anion ion-exchange layers joined together in series. Polymer BMs offer promising applications for many industrial processes (e. g., the use of bipolar electrodialysis for environmentally clean technologies and the treatment of salt-water effluents) because of their unique electrochemical properties. The most important of these properties is the electric field enhanced (EFE) water dissociation which arises when an electric current is forced through the membrane. This phenomenon occurs at the bipolar junction of the BM, and its coupling with ion transport, though still poorly understood, is the basis of most of the …

Observable Quantities for Electrodiffusion Processes in Membranes

2008

Electrically driven ion transport processes in a membrane system are analyzed in terms of observable quantities, such as the apparent volume flow, the time dependence of the electrolyte concentration in one cell compartment, and the electrical potential difference between the electrodes. The relations between the fluxes and these observable quantities are rigorously deduced from balances for constituent mass and solution volume. These relations improve the results for the transport coefficients up to 25% with respect to those obtained using simplified expressions common in the literature. Given the practical importance of ionic transport numbers and the solvent transference number in the ph…

Using Matlab's wavelet toolbox to compare electric signals outputted by microbial fuel cells

2019

Motivation: microbial fuel cells (MFC) represents a wastewater treatment technology with the potential for a relevant electric energy generation. The monitoring of the electric current outputted generates time series of data. It was generated two time series using an experimental setup with a low-cost dual chamber microbial fuel cell treating cassava wastewater and, also, it was used the electric current data from a previously described experiment with this same setup treating cheese whey. All of this, innovatively, according our best knowledge, was studied using power spectral density, multifractal and wavelet coherence analysis. Results are promising and indeed point out this approach as …

Quasi‐digital front‐ends for current measurement in integrated circuits with giant magnetoresistance technology

2014

In this study, the authors report on two different electronic interfaces for low-power integrated circuits electric current monitoring through current-to-frequency (I-f) conversion schemes. This proposal displays the intrinsic advantages of the quasi-digital systems regarding direct interfacing and self-calibrating capabilities. In addition, as current-sensing devices, they have made use of the giant magnetoresistance (GMR) technology because of its high sensitivity and compatibility with standard complementary metal oxide semiconductor processes. Single elements and Wheatstone bridges based on spin-valves and magnetic tunnel junctions have been considered. In this sense, schematic-level si…

Field-driven domain wall motion under a bias current in the creep andflow regimes in Pt/[CoSiB/Pt](N) nanowires

2016

AbstractThe dynamics of magnetic domain wall (DW) in perpendicular magnetic anisotropy Pt/[CoSiB/Pt]N nanowires was studied by measuring the DW velocity under a magnetic field (H) and an electric current (J) in two extreme regimes of DW creep and flow. Two important findings are addressed. One is that the field-driven DW velocity increases with increasing N in the flow regime, whereas the trend is inverted in the creep regime. The other is that the sign of spin current-induced effective field is gradually reversed with increasing N in both DW creep and flow regimes. To reveal the underlying mechanism of new findings, we performed further experiment and micromagnetic simulation, from which w…

Curvature in graphene nanoribbons generates temporally and spatially focused electric currents

2015

Today graphene nanoribbons and other graphene-based nanostructures can be synthesized with atomic precision. But while investigations have concentrated on straight graphene ribbons of fixed crystal orientation, ribbons with intrinsic curvature have remained mainly unexplored. Here, we investigate electronic transport in intrinsically curved graphene nanoribbons coupled to straight leads using two computational approaches. Stationary approach shows how transport gaps are affected both by the straight leads and by the degree of edge asymmetry in the curved ribbons. An advanced time-dependent approach shows that behind the façade of calm stationary transport the currents run violently: curvatu…

Current-Induced Dynamics of Chiral Magnetic Structures: Creation, Motion, and Applications

2021

Magnetic textures can be manipulated by electric currents via the mechanisms of spin-transfer and spin-orbit-torques. We review how these torques can be exploited to create chiral magnetic textures in magnets with broken inversion symmetries, including domain walls and skyrmions. These chiral textures can also be moved by (electric) currents and obey very rich dynamics. For example, magnetic domain walls feature the famous Walker breakdown, and magnetic whirls are subject to the skyrmion Hall effect, which is rooted in their real-space topology. These properties led to a variety of potential novel applications which we briefly overview.