Search results for "Electricity"
showing 10 items of 1225 documents
The strain response of piezoelectric multilayer actuators under combined action of electric field and in-plane uniform load
1997
Abstract The driving field governed strain of lead zirconate titanate piezoelectric multilayer actuators have been made within the 107 N/m2 stress and the 3 · 106 V/m triangle-like upward-down-ward driving voltage. A slow strain component as well as a specific relaxation pattern are detected being additional to the periodic part and attributed to the trapped space charge effects favored by nonuniform electric field of the multilayer.
Interface Effects in Ferroelectric Thin Films
1998
Dielectric, ferroelectric and piezoelectric characteristics in sol-gel derived and pulsed laser deposited (PLD) lead zirconate titanate (PZT), La modified lead titanate (PLT) and zirconate titanate (PLZT) ferroelectric thin films are investigated focusing on maintenance of thin film ferroelectric (FE) properties in a variety of thin film-electrodesubstrate interfaces. Interferometric studies of piezoelectric response of the heterostructures were performed with respect to a DC electrical bias and AC measurement frequency. The asymmetry of piezoelectric coefficient (d33) hysteresis, diminished values of d33, frequency-displacement and spot size — deformation behaviour in the ferroelectric het…
Numerical analysis of a piezoelectric structural health monitoring system for composite flange-skin delamination detection
2013
Abstract In this paper, a piezoelectric based Structural Health Monitoring (SHM) system is proposed to detect skin/stiffener debonding and delamination cracks proper of laminated composite structures. The SHM system is analyzed by means of a boundary element code implemented in the framework of piezoelectricity. The multidomain technique, coupled with an interface spring model, is used to model laminated composite structures as well as the bonding between the host delaminated structure and the piezoelectric sensor. Static sensitivity analyses are firstly performed on a drop-ply delaminated structure in order to identify a suitable configuration for the sensor. Then, the dynamic electromecha…
The fingerprint of Te-rich and stoichiometric Bi2Te3 nanowires by Raman spectroscopy
2016
We unambiguously show that the signature of Te-rich bismuth telluride is the appearance of three new peaks in the Raman spectra of Bi2Te3, located at 88, 117 and 137 cm−1 . For this purpose, we have grown stoichiometric Bi2Te3 nanowires as well as Te-rich nanowires. The absence of these peaks in stoichiometric nanowires, even in those with the smallest diameter, shows that they are not related to confinement effects or the lack of inversion symmetry, as stated in the literature, but to the existence of Te clusters. These Te clusters have been found in nonstoichiometric samples by high resolution electron microscopy, while they are absent in stoichiometric samples. The Raman spectra of the l…
Effect of hydroxyapatite concentration and size on morpho-mechanical properties of PLA-based randomly oriented and aligned electrospun nanofibrous ma…
2019
The growing demand for nanofibrous biocomposites able to provide peculiar properties requires systematic investigations of processing-structure-property relationships. Understanding the morpho-mechanical properties of an electrospun scaffold as a function of the filler features and mat microstructure can aid in designing these systems. In this work, the reinforcing effect of micrometric and nanometric hydroxyapatite particles in polylactic acid-based electrospun scaffold presenting random and aligned fibers orientation, was evaluated. The particles incorporation was investigated trough Fourier transform infrared spectroscopy in attenuated total reflectance. The morphology of the nanofibers …
Simulation of Young’s moduli for hexagonal ZnO [0 0 0 1]-oriented nanowires: first principles and molecular mechanical calculations
2017
The authors thank A Gulans, B Polyakov and S Vlassov for stimulating discussions. This study has been supported by the ERA.Net RUS Plus project No. 237 Watersplit. AB, RE and SL acknowledge the financial support by the Russian Foundation for Basic Research (Grant No. 17-03-00130-a) and the assistance of the Saint Petersburg State University Computer Center in the accomplishment of high-performance computations.
Ferroelectric liquid-crystalline elastomers
1994
Oriented liquid-crystalline (LC) elastomers (polar monodomains, concerning the direction of polarisation) have been prepared from polar monodomains of ferroelectric LC-polysiloxanes by a radical photocrosslinking process. Attempts to perform ferroelectric switching lead in these soft elastomers to an elastic stress which prohibits—for low voltages—a complete reorientation of the polar axis (ferroelectric switching). A ferroelectric switching can, however, be observed for high voltages. The loop of hysteresis of this switching is asymmetric concerning the zero point of the driving voltage. Piezoelectric measurements show that these elastomers combine an elastic memory for one polar state wit…
Electrochemical Characterization of Polyelectrolyte/Gold Nanoparticle Multilayers Self-Assembled on Gold Electrodes
2006
Polyelectrolyte/gold nanoparticle multilayers composed of poly(l-lysine) (pLys) and mercaptosuccinic acid (MSA) stabilized gold nanoparticles (Au NPs) were built up using the electrostatic layer-by-layer self-assembly technique upon a gold electrode modified with a first layer of MSA. The assemblies were characterized using UV-vis absorption spectroscopy, cyclic and square-wave voltammetry, electrochemical impedance spectroscopy, and atomic force microscopy. Charge transport through the multilayer was studied experimentally as well as theoretically by using two different redox pairs [Fe(CN)(6)](3-/4-) and [Ru(NH(3))(6)](3+/2+). This paper reports a large sensitivity to the charge of the out…
Heat and mass transfer analysis in single cell of PEFC using different PEM and GDL at higher temperature
2019
Abstract According to the H2 and fuel cell road map in Japan, the target operating temperature of polymer electrolyte fuel cell (PEFC) should be 90 °C from 2020 to 2025. In this study, the impact of polymer electrolyte membrane (PEM) and gas diffusion layer (GDL)'s thickness on heat and mass transfer characteristics as well as power generation performance of PEFC is investigated at operating temperature of 90 °C. The in-plane temperature distributions on anode and cathode separator are also measured using thermograph. As a result, it is observed that the increase in power from 1 W to 5 W at the current density of 0.80 A/cm2 as well as even temperature distribution within 1 °C can be obtaine…
Memory effects in MOS capacitors with silicon quantum dots
2001
To form crystalline Si dots embedded in SiO2, we have deposited thin films of silicon-rich oxide (SRO) by plasma-enhanced chemical vapor deposition of SiH4 and O2. Then the materials have been annealed in N2 ambient at temperatures between 950°C and 1100°C. Under such processing, the supersaturation of Si in the amorphous SRO film produces the formation of crystalline Si dots embedded in SiO2. The narrow dot size distributions, analyzed by transmission electron microscopy, are characterized by average grain radii and standard deviations down to about 1 nm. The memory functions of such structures has been investigated in MOS capacitors with a SRO film sandwiched between two thin SiO2 layers …