Search results for "Electrode"

Ni-Fe alloy nanostructured electrodes for water splitting in alkaline electrolyser

2021

Abstract In this work, nickel-iron alloy nanostructured electrodes obtained by template electrosynthesis method are investigated for both hydrogen and oxygen evolution reactions. Electrodes consist of nanowire arrays with high surface area that are able to ensures a high electrolytic activity. To obtain different alloy compositions, the concentration of the elements in the deposition baths is appropriately tuned. Results show that the composition of nanowires does not change linearly with the composition of deposition bath but are richer in Fe. Nanostructured electrodes are tested as both cathodes and anodes in 30 wt% KOH aqueous solution, at room temperature to determine the best alloy com…

Electrochemical Synthesis of Zinc Oxide Nanostructures on Flexible Substrate and Application as an Electrochemical Immunoglobulin-G Immunosensor

2022

Immunoglobulin G (IgG), a type of antibody, represents approximately 75% of serum antibodies in humans, and is the most common type of antibody found in blood circulation. Consequently, the development of simple, fast and reliable systems for IgG detection, which can be achieved using electrochemical sandwich-type immunosensors, is of considerable interest. In this study we have developed an immunosensor for human (H)-IgG using an inexpensive and very simple fabrication method based on ZnO nanorods (NRs) obtained through the electrodeposition of ZnO. The ZnO NRs were treated by electrodepositing a layer of reduced graphene oxide (rGO) to ensure an easy immobilization of the antibodies. On I…

Fabrication of CZTSe/CIGS Nanowire Arrays by One-Step Electrodeposition for Solar-Cell Application

2021

The paper reports some preliminary results concerning the manufacturing process of CuZnSnSe (CZTSe) and CuInGaSe (CIGS) nanowire arrays obtained by one-step electrodeposition for p-n junction fabrication. CZTSe nanowires were obtained through electrodeposition in a polycarbonate membrane by applying a rectangular pulsed current, while their morphology was optimized by appropriately setting the potential and the electrolyte composition. The electrochemical parameters, including pH and composition of the solution, were optimized to obtain a mechanically stable array of nanowires. The samples were characterized by scanning electron microscopy, Raman spectroscopy, and energy-dispersion spectros…

Identification of atrial fibrillation drivers by means of concentric ring electrodes

2022

The prevalence of atrial fibrillation (AF) has tripled in the last 50 years due to population aging. High-frequency (DFdriver) activated atrial regions lead the activation of the rest of the atria, disrupting the propagation wavefront. Fourier based spectral analysis of body surface potential maps have been proposed for DFdriver identification, although these approaches present serious drawbacks due to their limited spectral resolution for short AF epochs and the blurring effect of the volume conductor. Laplacian signals (BC-ECG) from bipolar concentric ring electrodes (CRE) have been shown to outperform the spatial resolution achieved with conventional unipolar recordings. Our aimed was to…

Fabrication and characterization of nanostructured Ni–IrO2 electrodes for water electrolysis

2014

Abstract Nanostructured Ni–IrO2 electrodes were fabricated by electrodeposition in a two-step procedure: first arrays of nickel nanowires (NWs) were electrodeposited within pores of polycarbonate (PC) membranes, then iridium oxide nanoparticles were deposited on the Ni metal after membrane dissolution, for improving the catalytic activity. The aim was to compare performance of these electrodes with traditional ones consisting of Ni film. Different methods of deposition of the IrO2 electrocatalyst were investigated and the effect on electrodes stability and activity is discussed. Despite a low coverage of Ni NWs by the electrocatalyst, results indicate a faster kinetics of O2 evolution in 1 …

Recent improvements in PbO2 nanowire electrodes for lead-acid battery

2015

Abstract Lead oxide nanowires are an attractive alternative to conventional pasted electrodes, owing to their high surface area leading to high specific energy batteries. Here, we report the performance of template electrodeposited PbO 2 nanowires used as positive electrodes. Nanostructured electrodes were tested at constant charge/discharge rate from 2 C to 10 C, with a cut-off potential of 1.2 V and discharge depth up to 90% of the gravimetric charge. These new type of electrodes are able to work at very high C-rate without fading, reaching an efficiency of about 90% with a very good cycling stability. In particular, after an initial stabilization, a specific capacity of about 200 mAh g −…

Template-assisted electrodeposition of cerium oxy-hydroxide nanostructures in aqueous and organic electrolytes

2008

Tumor hypoxia and therapeutic resistance

2008

For many years, the identification of tumor hypoxia, its systematic characterization and the assessment of its clinical relevance were not possible due to the lack of methods suitable for the routine measurement of intratumoral oxygen tensions in patients. In the late 1980s, a novel and clinically applicable standardized procedure was established enabling the determination of tumor oxygenation in accessible primary tumors, local recurrences, and metastatic lesions in patients using a computerized polarographic needle electrode system (Vaupel et al. 1991; Hockel et al. 1991). Within a relatively short period of time, the significance of tumor oxygenation for therapy outcome became evident in…

Tumor Oxygenation and Its Relevance to Tumor Physiology and Treatment

2003

For many years, the identification of tumor hypoxia, its systematic characterization and the assessment of its clinical relevance were not possible due to lack of methods suitable for the routine measurement of intratumoral oxygen tensions in patients. In the late 1980s, a novel and clinically applicable standardized procedure was established enabling the determination of the tissue oxygenation status in primary tumors, local recurrences, and metastatic lesions in patients using a computerized polarographic needle electrode system. Within a relatively short period of time, the significance of tumor oxygenation for therapy outcome became evident in numerous experimental and clinical studies.

Nanostructured Based Electrochemical Sensors.

2019

In this work, we present some results concerning the electrochemical behavior of nanostructured-based electrochemical sensors. In particular, the attention has been focused on Pd and Cu nanowires for detection of hydrogen peroxide and NiO thin film or Ni@NiO core–shell nanowires for detection of mercury ions. Ordered array of Pd and Cu nanowires was obtained through displacement deposition reaction in a commercial polycarbonate membrane acting as a template. The method leads to stable nanostructured electrodes of Pd and Cu with high surface area. For the detection of mercury ions, we have fabricated a Ni/NiO electrochemical sensor, obtained by mild thermal oxidation of Ni-foil. Some results…