Search results for "Electron beam"
showing 10 items of 129 documents
Polyamorphic transformation induced by electron irradiation ina-SiO2glass
2009
We report a study by electron paramagnetic resonance of amorphous silicon dioxide $(a{\text{-SiO}}_{2})$ irradiated by 2.5 MeV electrons in the dose range from $1.2\ifmmode\times\else\texttimes\fi{}{10}^{3}$ to $5\ifmmode\times\else\texttimes\fi{}{10}^{6}\text{ }\text{kGy}$. By measuring the change in the splitting of the primary $^{29}\text{S}\text{i}$ hyperfine doublet of the ${E}_{\ensuremath{\gamma}}^{\ensuremath{'}}$ centers we evidenced an irradiation induced local (around the defects) densification of $a{\text{-SiO}}_{2}$. Our data show that the local degree of densification of the materials is significantly higher than that obtained by mean density measurements, suggesting that the …
Carbon nanotubes under electron irradiation: Stability of the tubes and their action as pipes for atom transport
2005
The production and migration of carbon interstitials in carbon nanotubes under electron irradiation is studied experimentally and theoretically. It is shown that the threshold for displacing carbon atoms and the defect production rate strongly depend on the diameter of the nanotubes. Multiwalled nanotubes shrink by a loss of atoms and by diffusion of interstitials through the inner hollow in the axial direction. Thus, experimental evidence is given that nanotubes can act as nanoscale pipes for the transport of atoms.
Plastic Deformation of Single Nanometer-Sized Crystals
2008
We report in situ electron microscopy observations of the plastic deformation of individual nanometer-sized Au, Pt, W, and Mo crystals. Specifically designed graphitic cages that contract under electron irradiation are used as nanoscopic deformation cells. The correlation with atomistic simulations shows that the observed slow plastic deformation is due to dislocation activity. Our results also provide evidence that the vacancy concentration in a nanoscale system can be smaller than in the bulk material, an effect which has not been studied experimentally before.
Metal-organic chemical vapor deposition of Cr2O3 and Nd2O3 coatings. Oxide growth kinetics and characterization
2000
Thin oxide films of Cr2O3 and Nd2O3 were prepared, using Metal-Organic Chemical Vapor Deposition (MOCVD) technique, to protect stainless steels against corrosion at high temperature. The conditions of precursor volatilization were studied by thermogravimetry. Deposited film growth kinetics depended on the deposition parameters, particularly substrate temperature, gas flow rate and location of substrate in the coating reactor. The influence of the deposition parameters on the deposition rate and the uniformity of the films is discussed. The oxide films were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and atomic force mi…
Study of the Hydrogen Embrittlement Sensitivity of an X4CrNiMo 16.5.1 Stainless Steel and the Associated Electron Beam Weld
2015
X4CrNiMo 16.5.1 steel (commercial name APX4) is a low carbon martensitic stainless steel known for its remarkable mechanical characteristics and its good resistance to corrosion. The use of APX4 in the manufacture of high pressure gas vessels requires a thorough understanding of its resistance to Hydrogen Embrittlement (HE) as the gas can contain traces of hydrogen, and martensitic steels, and their welds, are generally very sensitive to HE. This paper deals with the first part of this study, involving the characterization of the microstructure and the mechanical properties of each zone of the electron beam weld (melted zone and four different heat affected zones), and the investigation of …
Luminescence properties of KNbO3 crystals
1997
Thermostimulated luminescence, X-ray-induced luminescence, photostimulated luminescence as well as the time-resolved luminescence and absorption after pulsed electron beam irradiation were studied in KNbO3 crystals at 80–400 K. A correlation between defects causing the luminescence and blue-light-induced IR absorption effects supressing the second harmonic generation efficiency in KNbO3 is discussed.
Artificial granularity in two-dimensional arrays of nanodots fabricated by focused-electron-beam-induced deposition.
2010
We have prepared 2D arrays of nanodots embedded in an insulating matrix by means of focused-electron-beam-induced deposition using the W(CO)(6) precursor. By varying the deposition parameters, i.e. the electron beam current and energy and the raster constant, we obtain an artificial granular material with tunable electrical properties. The analysis of the temperature dependence of the conductivity and of the current-voltage characteristic suggests that the transport mechanism is governed by electron tunneling between artificial grains. In order to understand the nature of the granularity and thus the microstructural origin of the electronic transport behavior, we perform TEM and micro-Raman…
Evolution of microstructures and mechanical properties during dissimilar electron beam welding of titanium alloy to stainless steel via copper interl…
2013
Abstract The influence of operational parameters on the local phase composition and mechanical stability of the electron beam welds between titanium alloy and AISI 316L austenitic stainless steel with a copper foil as an intermediate layer has been studied. It was shown that two types of weld morphologies could be obtained depending on beam offset from the center line. Beam shift toward the titanium alloy side results in formation of a large amount of the brittle TiFe2 phase, which is located at the steel/melted zone interface and leads to reducing the mechanical resistance of the weld. Beam shift toward the steel side inhibits the melting of titanium alloy and, so, the formation of brittle…
Growth of Fe nanostructures
2004
Abstract Highly ordered arrays of epitaxial iron thin film nanostructures were grown by molecular beam epitaxy techniques on m-plane sapphire α-Al2O3 (1 0 1 0) substrates. Iron was deposited by electron beam evaporation under shallow incidence onto faceted sapphire substrates held at elevated temperatures of 450°C. Scanning electron microscopy suggests the formation of morphologically and electrically isolated nanowire structures on the ridges of the facets. The topology of the structures depends strongly on the iron deposition angle.
Mg and In Codoped p-type AlN Nanowires for pn Junction Realization.
2019
Efficient, mercury-free deep ultraviolet (DUV) light-emitting diodes (LEDs) are becoming a crucial challenge for many applications such as water purification. For decades, the poor p-type doping and difficult current injection of Al-rich AlGaN-based DUV LEDs have limited their efficiency and therefore their use. We present here the significant increase in AlN p-doping thanks to Mg/In codoping, which leads to an order of magnitude higher Mg solubility limit in AlN nanowires (NWs). Optimal electrical activation of acceptor impurities has been further achieved by electron irradiation, resulting in tunnel conduction through the AlN NW p-n junction. The proposed theoretical scenario to account f…