Search results for "Electron microscope"
showing 10 items of 784 documents
Mechanism of pulsed electron irradiation of the PLZT X/65/35 ceramics
2005
The comprehensive study of high-current pulsed electron irradiation effect on the structure and lattice dynamics as well as Atomic Force (AFM) and Laser Confocal Scanning microscope (LSCM) surface imaginaries of PLZT 8/65/35 ceramics have been performed. X-ray powder diffraction studies show the transformation of the cubic perovskite Pm-3m (Z = 1) into orthorhombic Pmmm (Z = 1) structure for the sample irradiated by one pulse (dose 6 × 1014 electrons/cm2) and into cubic Pm-3m with increased lattice volume and more ordered structure at irradiating by 10 and 100 pulses (dose 6 × 1015 and 6 × 1016 el/cm2). A consequence, the changes of number, intensity and phonon modes position occur in Raman…
Keggin heteropolyacid H3PW12O40 supported on different oxides for catalytic and catalytic photo-assisted propene hydration
2013
Catalytic and catalytic photo-assisted hydration of propene to form 2-propanol in gas–solid regime at atmospheric pressure and 85 1C were carried out by using a heteropolyacid (POM) supported on different oxides. Binary materials were prepared by impregnation of H3PW12O40 on different commercial and home prepared supports (TiO2, SiO2, WO3, ZrO2, ZnO, Al2O3). Some of the composites were active both for catalytic and catalytic photo-assisted reactions. The Keggin type POM was completely and partially degraded, when supported on ZnO and Al2O3, respectively, and these binary solids always resulted as inactive for both catalytic and catalytic photo-assisted reactions. The supported Keggin POM sp…
Crystalline microstructure of sepiolite influenced by grinding
2005
The crystalline microstructure of ground sepiolite has been investigated. A reference sample of sepiolite and products of its comminution by dry grinding were studied through X-ray diffraction pattern analysis, specific surface measurements by nitrogen adsorption and complementary analysis of field emission scanning electron microscope images. A statistical model of polycrystals was applied to describe and determine the crystalline microstructure of the studied specimens. The model parameters characterizing the microstructure were prevalent crystallite shape, volume-weighted crystallite size distribution and second-order crystalline lattice strain distribution, and they were determined for …
Mechanical and structural characterizations of gamma- and alpha-alumina nanofibers
2015
Abstract We investigate the applicability of alumina nanofibers as a potential reinforcement material in ceramic matrix compounds by comparing the mechanical properties of individual nanofibers before and after annealing at 1400 °C. Mechanical testing is performed inside a scanning electron microscope (SEM), which enables observation in real time of the deformation and fracture of the fibers under loading, thereby providing a close-up inspection of the freshly fractured area in vacuum. Improvement of both the Young's modulus and the breaking strength for annealed nanofibers is demonstrated. Mechanical testing is supplemented with the structural characterization of the fibers before and afte…
A multi-technique, micrometer- to atomic-scale description of a synthetic analogue of chukanovite, Fe-2(CO3)(OH)(2)
2014
International audience; A synthetic analogue of chukanovite Fe-2(CO3)(OH)(2) is formed during experimental work on iron-clay interactions simulating the cooling of containers in radioactive waste repositories. Despite its small size and the mixture with other minerals it is undoubtedly identified by X-Ray Diffraction, Fourier Transform Infrared Spectroscopy, Scanning Electron Microscopy and Transmission Electron Microscopy. For the first time, the structural characterisation of a synthetic chukanovite is carried out thanks to the combination of Automated Diffraction Tomography and Precession Electron Diffraction. Refinement results and comparison with literature data show that the structure…
Relative proportions of rutile and pseudo-brookite phases in the Fe(III)-TiO2 system at elevated temperature
1997
Abstract The Fe(III)-TiO2 system has been studied at T ≥ 1023 K in the range of concentration 2–10 at.% of iron by powder X-ray diffraction, transmission and scanning electron microscopy, and optical microscopy. The relationship between the relative proportions of the TiO2 rutile phase and the pseudo-brookite phase Fe2TiO5, has been investigated in powder samples. Single crystals of pure rutile and rutile doped with 0.5 at.% of iron have been examined to elucidate the microstructures found in the powders. The results suggest that a low degree of solid solubility exists and that doped crystals contain planar faults on 101 planes.
Electrical Characterization of the Fe-Doped BT Ceramics by an Impedance Spectroscopy
2015
The electric properties of the Fe - doped BaTiO3 ceramics was investigated as a function of frequency and temperature. The structure and morphology of investigated sample were characterized by an X-ray diffraction and scanning electron microscopy. The impedance measurements were carried out at the temperature ranging from 450 K to 600 K, and at the frequency range from 0.1 Hz to 10 MHz. Based on these parameters the electrical properties of the grains and grains boundaries were described. The bulk and grains boundaries resistance of ceramics and the thermal activation energies were determined.
Which tool to distinguish transient alumina from alpha alumina in thermally grown alumina scales?
2005
International audience; Alumina scales constitute excellent protective barriers when they form on alumina-forming steels. If they keep tightly adherent to the underlying substrate, they isolate it from the surrounding aggressive atmosphere at high temperature. The protectiveness of the alumina scale is highly dependant upon its growth mechanism. The nucleation and transformation of transient alumina (mainly g-Al2O3 and y-Al2O3) is known to play an important role on alumina scale formation. It is therefore fundamental to characterise these transient alumina especially during the early stages of the oxidation process. The morphology of the transient alumina was observed by scanning electron m…
Extractive-Pyrolytic Method for Au/MeO<sub>x</sub> Nanocomposites Production
2014
Au/MeOx(MeOx- SiO2, Al2O3and TiO2) nanocomposites have been produced by the extractive-pyrolytic method. An organic extract – a solution of n-trioctylammonium tetrachlorolaurate ([Oct3NH]AuCl4) in toluene – was used as a gold-containing precursor. The produced samples were analyzed by IR spectroscopy, X-ray diffraction and scanning electron microscopy. The performed studies have shown that the mean size of the metal crystallites vary within wide limits: on Al2O3from 60 nm to 35 nm; on SiO2from 33 nm to 23 nm; on TiO2from 50 nm to 13 nm.
Growth and characterization of Mg 1‐x Cd x O thin films
2016
In this paper, we study the growth of thin films of the Mg1–xCdxO alloy in the Mg-rich range of compositions by using the metal organic chemical vapour deposition (MOCVD) method at low pressure. X-ray diffraction (XRD) has been used to analyse the compound formation and the progressive incorporation of Cd2+ ions into the cubic MgO lattice. Both, layers with a single-cubic phase of Mg1–xCdxO and layers with a phase separation, where Cd1–xMgxO and Mg1–xCdxO coexist, have been studied. Finally, a morphological study of the layers has been carried out by using scanning electron microscopy (SEM) and the layers' composition has been measured by energy dispersive X-ray analysis (EDX). (© 2016 WILE…