Search results for "Electron microscope"
showing 10 items of 784 documents
High magnification SEM observations for two types of granularity in a high burnup PWR fuel rim
1998
Abstract Rim microstructure of an UO2 pellet irradiated up to 61 GWd/tU, observed with high magnification scanning electron microscopy, presented two types of subgrains: polyhedral and round subgrains. Round subgrains were also observed on the surface of fabrication pores along the pellet radius. These round-shaped subgrains seem to be associated to free surface rearrangement. This new type of round subgrains was proved to be independent of the rim effect. Observations of the fuel structure in the vicinity of rim area evidenced two types of defects specific to rim effect: planar defects and small intergranular pores. Hypothesis is made that the accumulation of planar defects could generate …
Structural changes and distribution of accumulated tritium in the carbon based JET tiles
2011
Abstract In this study the tritium distribution and the effect of structural changes thereon have been analyzed in the bulk of the tile selected from the JET Mark II SRP divertor. Tritium content has been analyzed by the full combustion technique [1] . The structure has been investigated by the method of Scanning Electron Microscopy. Tritium depth profiles have been measured at different poloidal positions. A high specific activity of tritium (up to 156 MBq g −1 ) was found at the plasma-facing surface. At some tile positions up to 98–99% of the T can be in the surface slice of 1 mm thickness, whereas in other poloidal positions there can be more T in the bulk than at the surface. The struc…
Growth of osteoblasts on lithographically modified surfaces
2007
Here we report about preliminary investigations on developing substrates for culturing osteoblasts, the cells responsible for production of mineralised bone, by lithographically modifying the surfaces of several materials. The proton beam writing system at the National University of Singapore was used to fabricate high aspect ratio structures in PMMA, while two-dimensional low aspect ratio structures were fabricated using conventional electron beam lithography (EBL) and UV lithography (UVL) in SU-8. It was found that oxygen plasma treatment of structured SU-8 surfaces changed the surface layer and significantly improved cell attachment and proliferation. Cells grown on patterned thick PMMA …
Rare Earth Activated Oxyfluoride Glasses and Glass-Ceramics for Scintillation Applications
2012
Oxyfluoride glasses 49SiO2·6Al2O3·24Li2O·20LaF3 activated with Tb, Ce, Eu have been synthesized and studied. After heating at 580°C and 750°C crystalline phases were obtained. The samples were studied by DTA (Differential thermal analyzer), CL (cathodoluminescence), XRD (X-ray diffraction), SEM (scanning electron microscope), EDS (energy dispersive x-ray spectroscopy) methods. We found out that presence of crystalline phase enhances the CL of Tb activated samples significantly; whereas, the shortest decay time of 0.29 μs has been observed for less intense Ce doped glass sample.
ODS ferritic steels obtained from gas atomized powders through the STARS processing route: Reactive synthesis as an alternative to mechanical alloying
2018
Authors acknowledge ALBA synchrotron (Spain) for the provision of beamtime on the beam line BL22-CLAESS (Proposal 2016081797). Transmission electron microscopy observations were accomplished at Centro Nacional de Microscopía Electrónica, CNME-UCM. This work has been carried out within the framework of the EUROfusion Consortium and has received funding from the Euratom research and training programme 2014–2018 under grant agreement No 633053. The views and opinions expressed herein do not necessarily reflect those of the European Commission. Financial support from Basque Government through the ELKARTEK ACTIMAT 2016 project is also acknowledged.
Preliminary corrosion studies of P-91 in flowing lead–lithium with and without magnetic field for Indian lead–lithium ceramic breeder test blanket mo…
2014
To study the corrosion of P-91 (9% chromium and 1% molybdenum) material with lead–lithium (Pb–Li) eutectic, two experiments were carried out in a forced convection loop, at eutectic temperature of 550 °C. The first experiment was carried out at a velocity of 15 cm s−1 for 1000 h and the second experiment, at a velocity of 30 cm s−1 for 2700 h. In both the experiments, P-91 sample coupons were exposed to Pb–Li flow in the presence and absence of magnetic field. Samples were analyzed using an optical microscope, scanning electron microscope (SEM) and electron probe micro-analyzer (EPMA). Micro-Vickers hardness testing was also carried out. Dissolution of elements into liquid metal is the main…
Synthesis and characterization of cobalt silicide films on silicon
2006
Cobalt silicide has emerged as a leading contact material in silicon technology due to its low resistivity, high stability and small lattice mismatch. In this study, 0.2-0.4 mu m thick Co films were deposited on Si(100) wafers by RF magnetron sputtering at room temperature, and annealed at temperatures from 600 to 900 degrees C in vacuum. As-deposited and annealed samples were characterized by Rutherford backscattering spectrometry (RBS), nuclear reaction analysis (NRA), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Although the Si substrates were sputter cleaned before the deposition, all the samples showed a thin oxide layer at the Si/Co interfaces. Annealing up to 700 d…
Electroless synthesis of lepidocrocite (γ-FeOOH) nanotubes in ion track etched polycarbonate templates
2012
In this study, we describe the electroless synthesis of lepidocrocite (γ-FeOOH) nanotubes produced in ion track etched polycarbonate foils. The foils act as templates after they had been irradiated with heavy ions to produce latent tracks that were etched with a desired diameter. Templates are used to fabricate shape formed 1D nanostructures in general. The synthesis of lepidocrocite nanotubes was carried out in a simple two-step method: firstly, particles were formed by precipitation in aqueous solution; secondly, nanotubes were produced by the deposition of the particles inside the nanochannels of the polycarbonate template. Solvent effects were considered to achieve homogeneous growth re…
Smooth crack-free targets for nuclear applications produced by molecular plating
2013
The production process of smooth and crack-free targets by means of constant current electrolysis in organic media, commonly known as molecular plating, was optimized. Using a Nd salt, i.e., [Nd(NO3)(3)center dot 6H(2)O], as model electrolyte several constant current density electrolysis experiments were carried out to investigate the effects of different parameters, namely the plating solvent (isopropanol and isobutanol mixed together, pyridine, and N,N-dimethylformamide), the electrolyte concentration (0.11, 0.22, 0.44 mM), the applied current density (0.17, 0.3, 0.7, and 1.3 mA/cm(2)), and the surface roughness of the deposition substrates (12 and 24 nm). Different environments (air and …
Three-Dimensional Microstructural Properties of Nanofibrillated Cellulose Films
2014
Abstract: Nanofibrillated cellulose (NFC) films have potential as oxygen barriers for, e.g., food packaging applications, but their use is limited by their hygroscopic characteristics. The three-dimensional microstructure of NFC films made of Pinus radiata (Radiata Pine) kraft pulp fibres has been assessed in this study, considering the structural development as a function of relative humidity (RH). The surface roughness, micro-porosity, thickness and their correlations were analyzed using X-ray microtomography (X–μCT) and computerized image analysis. The results are compared to those from scanning electron microscopy and laser profilometry. Based on a series of films having varying amounts…