Search results for "Electron microscope"
showing 10 items of 784 documents
Hybrid chalcogenide nanoparticles: 2D-WS2 nanocrystals inside nested WS2 fullerenes.
2013
The MOCVD assisted formation of nested WS2 inorganic fullerenes (IF-WS2) was performed by enhancing surface diffusion with iodine, and fullerene growth was monitored by taking TEM snapshots of intermediate products. The internal structure of the core–shell nanoparticles was studied using scanning electron microscopy (SEM) after cross-cutting with a focused ion beam (FIB). Lamellar reaction intermediates were found occluded in the fullerene particles. In contrast to carbon fullerenes, layered metal chalcogenides prefer the formation of planar, plate-like structures where the dangling bonds at the edges are stabilized by excess S atoms. The effects of the reaction and annealing temperatures o…
Initial Preparation and Characterization of Single Step Fabricated Intermediate Temperature Solid Oxide Fuel Cells (IT-SOFC)
2013
In this study, facile tape casting process has been successfully carried out to fabricate an unit anode supported intermediate temperature solid oxide fuel cell (IT-SOFC) with four different layers: a composite cathode which is a mix of La0.6Sr0.4Co0.2Fe0.8O3 (LSCF48) and Gd0.1Ce0.9O1.9 (GDC10), GDC10 as thin electrolyte layer, NiO-GDC10 without pore former as thin anode functional layer (AFL), and anode support layer of NiO-GDC10 with carbon pore former. The multi-layer was sintered once to produce an unit planar cell. An OCV of 1.002 V at 500 °C, and maximum power density of 466 mW cm–2 at 648 °C are obtained. These results indicate negligible leakage of fuel through electrolyte. Furtherm…
Interfacial Self-Assembly to Spatially Organize Graphene Oxide Into Hierarchical and Bioactive Structures
2020
Multicomponent self-assembly holds great promise for the generation of complex and functional biomaterials with hierarchical microstructure. Here, we describe the use of supramolecular co-assembly between an elastin-like recombinamer (ELR5) and a peptide amphiphile (PA) to organize graphene oxide (GO) flakes into bioactive structures across multiple scales. The process takes advantage of a reaction—diffusion mechanism to enable the incorporation and spatial organization of GO within multiple ELR5/PA layers. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and ImageJ software were used to demonstrate the hierarchical organization of GO flakes within the ELR5/PA lay…
Large Area Deposition by Radio Frequency Sputtering of Gd0.1Ce0.9O1.95 Buffer Layers in Solid Oxide Fuel Cells: Structural, Morphological and Electro…
2021
We investigate the influence of position, under large circular sputtering targets, on the final electrochemical performance of 35 mm diameter button solid oxide fuel cells with sputter-deposited Gadolinium doped Ceria barrier layers, positioned in order to almost cover the entirety of the area associated with a 120 × 80 mm2 industrial cell. We compare the results obtained via structural and morphological analysis to the Electrochemical Impedance Spectroscopy (EIS) measurements performed on the button cells, disentangling the role of different parameters. The Atomic Force Microscopy analysis makes it possible to observe a decrease in the roughness values from the peripheral to the central zo…
Evaluation of Rhodamine B Photocatalytic Degradation over BaTiO
2021
This research was funded by UIDB/50006/2020 with funding from FCT/MCTES through national funds and from the Institute of General and Ecological Chemistry of Lodz University of Technology. Susana L.H. Rebelo and Iwona Kuźniarska-Biernacka thank FCT (Fundação para a Ciência e Tecnologia) for funding through program DL 57/2016–Norma transitória (RE-QUIMTE/EEC2018/30 (SLHR) and REQUIMTE/EEC2018/14 (IKB)).
A New Methodological Approach to Correlate Protective and Microscopic Properties by Soft X-ray Microscopy and Solid State NMR Spectroscopy: The Case …
2021
Hydrophobic treatment is one of the most important interventions usually carried out for the conservation of stone artefacts and monuments. The study here reported aims to answer a general question about how two polymers confer different protective performance. Two fluorinated-based polymer formulates applied on samples of Cusa’s stone confer a different level of water repellence and water vapour permeability. The observed protection action is here explained on the basis of chemico-physical interactions. The distribution of the polymer in the pore network was investigated using scanning electron microscopy and X-ray microscopy. The interactions between the stone substrate and the protective…
Mechanical and Thermal Properties of Insulating Sustainable Mortars with Ampelodesmos mauritanicus and Pennisetum setaceum Plants as Aggregates
2021
The use of natural fibers in cement composites is a widening research field as their application can enhance the mechanical and thermal behavior of cement mortars and limit their carbon footprint. In this paper, two different wild grasses, i.e., Ampelodesmos mauritanicus, also called diss, and Pennisetum setaceum, also known as crimson fountaingrass, are used as a source of natural aggregates for cement mortars. The main purpose is to assess the possibility of using the more invasive crimson fountaingrass in place of diss in cement-based vegetable concrete. The two plant fibers have been characterized by means of scanning electron microscopy (SEM), helium picnometry and thermogravimetric an…
Fabrication of CZTSe/CIGS Nanowire Arrays by One-Step Electrodeposition for Solar-Cell Application
2021
The paper reports some preliminary results concerning the manufacturing process of CuZnSnSe (CZTSe) and CuInGaSe (CIGS) nanowire arrays obtained by one-step electrodeposition for p-n junction fabrication. CZTSe nanowires were obtained through electrodeposition in a polycarbonate membrane by applying a rectangular pulsed current, while their morphology was optimized by appropriately setting the potential and the electrolyte composition. The electrochemical parameters, including pH and composition of the solution, were optimized to obtain a mechanically stable array of nanowires. The samples were characterized by scanning electron microscopy, Raman spectroscopy, and energy-dispersion spectros…
Magnetoresistivity and crystal structure of epitaxial La0.67Ca0.33MnO3 films
1998
Abstract We investigated thin-film growth of doped manganites by sputter deposition on SrTiO 3 (1 0 0), MgO (1 0 0) and r -plane Al 2 O 3 (1 0 1¯2) substrates and found an in-plane-oriented growth. The unit cell of the films showed distortions from the simple cubic perovskite structure, represented by a tetragonal unit cell with a′ = b′ = √2 a ; c′ = 2 a . By scanning electron microscopy we investigated the growth morphology of the films. We determined the magnetotransport properties above and below room temperature. Transport at high temperatures is best described by polaron hopping.
Preparation and characterization of gels with garnet structure: A3B2C3O12, using ‘non-classical’ solvents
1992
Abstract Synthesis and characterization of some crystalline garnets by sol-gel techniques is described. The effects of emthanol, dimethyl sulfoxide (DMSO), CH2Cl2 and toluene solvents on gelation of TEOS are considered. Multicomponent gel formation in systems with stoichiometries 3CaO·Cr2O3·3SiO2 and 3CaO·Al2O2 was studied using DMSO, a polar solvent, and toluene, an apolar solvent. The dried gel was thermally treated and the powder was characterized by X-ray diffraction, differential thermal analysis/thermogravimetric analysis and scanning electron microscopy.