Search results for "Electron microscope"
showing 10 items of 784 documents
Effect of halloysite nanotubes filler on polydopamine properties
2019
Abstract Hypothesis Polydopamine (PDA) is widely used as hydrophilic coating for several applications. However, most of the methods studied to improve or manipulate PDA properties are multistep and time-consuming, and there is a need for versatile strategies aimed at controlling and modifying the properties of PDA. Experiments PDA-halloysite nanocomposites were produced under different oxidation conditions in alkaline and acidic media and were characterized by UV–visible and attenuated total refraction- Fourier Transform Infrared spectroscopies, thermogravimetric analysis, porosimetry, scanning electron microscopy, X-ray diffraction and contact angle measurements against the reference PDA p…
A new approach to the synthesis of intermetallic compounds: mild synthesis of submicrometric CoxMy (M = Mo, W; x∶y = 3∶1 and 7∶6) particles by direct…
2002
A simple processing route to cobalt–molybdenum and cobalt–tungsten intermetallics (CoxMy, where M = Mo and W, and x∶y = 3∶1 and 7∶6) has been developed, on the basis of the use of precursors resulting from freeze-drying of aqueous solutions of the appropriate common metal salts. The influence of the preparative variables on the outcomes of this procedure is examined. These compounds are prepared as single phases by thermal reduction of amorphous freeze-dried powders under a hydrogen–argon atmosphere (8% H2), followed by slow cooling of the samples. The materials have been characterised by X-ray powder diffraction, metal analysis, scanning electron microscopy and thermogravimetry under an ox…
Reconsidering the accuracy of X-ray fluorescence and ion beam based methods when used to measure the thickness of ancient gildings
2017
Since at least 5000 years ago, gilding techniques have been used for decoration purposes or to make artefacts appear as made of solid gold. Investigation of ancient gildings inevitably requires measuring their thickness, which is usually done either through the observation of cross-sections or by methods such as Rutherford backscattering spectroscopy, particle-induced X-ray emission and X-ray fluorescence. Whereas the former method requires sampling, the latter ones are non-invasive and therefore preferable. These non-invasive methods, however, measure the number of atoms per unit area, which can be converted into thickness only if the density is known. So far this has not been considered a…
Cs0.86(NH41.14SO4Te(OH)6 in porous anodic alumina for micro fuel cell applications.
2011
Abstract Cs0.86(NH4)1.14SO4Te(OH)6 supported by anodic alumina membranes (AAMs) has been characterized for the first time in H2/O2 fuel cell. The fabricated membrane electrode assemblies are able to produce peak power densities in the range 15–30 mW cm−2 under mild conditions (room temperature, low humidity and low Pt loading) and show an increased durability with cycling with respect to previous results obtained with AAM-based fuel cell. The physico-chemical characterization of the electrolytes has been carried out through X-ray diffractometry, scanning electron microscopy and micro-raman analysis. An estimation of the composite membranes conductance under fuel cell operation has been carr…
In vitro degradation of porous PLLA/pearl powder composite scaffolds
2013
Abstract The in vitro degradation behavior of poly- l -lactide (PLLA), PLLA/aragonite pearl powder and PLLA/vaterite pearl powder scaffolds was investigated. The scaffolds were soaked in phosphate buffer solution (PBS) up to 200 days. Scanning electron microscopy (SEM), gel permeation chromatography (GPC), and differential scanning calorimetry (DSC) were used to observe any degradation of the scaffolds. Degradation behaviors such as changes in pH, porosity, bulk density, water absorption, weight loss and mechanical properties were discussed. The results show that a gradual increase of the pH in composite scaffolds can decrease the rate of hydrolysis of PLLA. PLLA/vaterite and PLLA/aragonite…
Electrosynthesis of Sn-Co nanowires in alumina membranes
2010
A fabrication process of amorphous nanowires of Sn-Co alloys, based on electrodeposition into anodic alumina membranes, is described. It is shown that nanowires of tin-cobalt alloys with different compositions can be produced by varying electrodeposition time and concentration ratio of salts dissolved into the electrolytic bath. Importance of the chelating agent to produce amorphous Sn-Co alloys has also been addressed. Electrodepositions were carried out potentiostatically at -1 V versus Saturated Calomel Electrode and 60 degrees C for times ranging from 10 to 90 minutes; the atomic fraction of Co2+ in the aqueous electrolyte (Co2+/(Co2+ + Sn2+)) was varied from 0.33 to 0.67. Nanowires asp…
A tungsten oxide–lutetium bisphthalocyanine n–p–n heterojunction: from nanomaterials to a new transducer for chemo-sensing
2019
We report on a new hybrid heterojunction gas-sensitive device by combining a molecular material with a metal oxide. WO3 was synthesised via an aerosol-assisted chemical vapour deposition technique from a tungsten hexacarbonyl precursor. Onto an inorganic film, LuPc2 was vacuum evaporated. The morphology of the WO3–LuPc2 hybrid films is dominated by the morphological features of the tungsten oxide film, as shown by scanning electron microscopy and atomic force microscopy. Raman spectroscopy of the device confirms the presence of both materials. The non-linear I–V characteristics demonstrate the existence of an energy barrier at the interface between the inorganic and molecular materials. The…
Effect of different sintering process on flexural strength of translucency monolithic zirconia
2018
Background Sintering process is responsible for the strength of zirconia restoration. This study evaluated the effect of different sintering temperatures and sintered-holding times on flexural strength of translucency monolithic zirconia. Material and Methods One hundred and thirty five zirconia bar specimens (width-length-thickness = 10×20×1.5 mm) were prepared from yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) ceramic and randomly divided into nine groups to be sintered at different temperatures [decreasing- (SD, 1350°C), regular- (SR, 1450°C), and increasing- (SI, 1550°C) sintering temperature] and different sintered-holding times [shortening- (HS, 60 min), regular- (HR, …
Sulfate-Templated 2D Anion-Layered Supramolecular Self-Assemblies
2019
Summary Using solution and solid-state analyses, we demonstrate that the tripodal N-methylated(1,3,5-benzene-tricarboxamide)-tris(phenylurea) BTA ligands, possessing urea functionalities in the meta position, are able to form extended self-assembly 2D networks via hydrogen bonding templated by sulfate (SO42–). The divergence of the urea binding sites confers a propeller-like conformation to the ligands and is key to formation of the self-assemblies. Studies in solution and in the solid state as well as scanning electron microscopy (SEM) on the self-assembly properties of the ligands showed that the convergence also leads to the formation of hierarchical structures, including porous films an…
The effect of Mo and Ge reactive elements on high-temperature oxidation of higher manganese silicide
2021
Abstract Higher manganese silicide (HMS) alloys (Mnx-αMoαSiy-βGeβ (x = 0.99–1.011, α = 0.005–0.02, y = 1.75, β = 0.005–0.01)) were studied to elucidate the effect of Mo and Ge pertaining to oxidation. Oxidation experiments were conducted using thermogravimetry and characterized using x-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). Isoconversion experiments below 450 °C, shows that doping (up to 2 at%) raises the oxidation potential of HMS. Isothermally, the oxidation rate reduces buy one order of magnitude by doping on Mn and/or Si sites from 0.5 to 2 at%, revealing that the dopants-based oxides do not lessen the robustness of SiO2 oxide.