Search results for "Electron microscope"

Tuning of biodegradation rate of PLLA scaffolds via blending with PLA

2009

Blends of Poly-L-Lactic Acid (PLLA) with Poly-Lactic Acid (PLA) in different proportions (95/5, 90/10, 80/20, 70/30 and 60/40) were utilized in order to realize biodegradable and biocompatible scaffolds for soft tissue engineering applications. The scaffolds were produced via thermally induced phase separation (TIPS) starting from ternary systems where dioxane was the solvent and water the non-solvent. Morphology was evaluated by Scanning Electron Microscopy (average pore size and interconnection). Foams’ apparent density was also evaluated (porosity ranges from 87% to 92%). Moreover an in vitro biodegradation test of scaffolds was set-up in order to verify the rate of degradation of the va…

Biopolymer based nanocomposites reinforced with graphene nanoplatelets

2016

In this work, biopolymer based nanocomposites filled with graphene nanoplatelets (GnP) were prepared by melt compounding in a batch mixer. The polymer used as matrix was a commercial biodegradable polymer-blend of PLA and a copolyester (BioFlex®). The prepared materials were characterized by scanning electron microscopy (SEM), rheological and mechanical measurements. Moreover, the effect of the GnP amount on the investigated properties was evaluated. The results indicated that the incorporation of GnP increased the stiffness of the biopolymeric matrix.

Synthesis and characterization of water-swellable?,?-polyasparthydrazide derivatives

1995

α, β-polyasparthydrazide (PAHy) was crosslinked by glutaraldehyde to form water-swellable materials possessing a three-dimensional molecular network. Different crosslinking degrees were prepared varying glutaraldehyde/PAHy ratio and samples containing 5-fluorouracil were obtained by incorporating the drug into the polymer networks during the crosslinking reaction. All samples were characterized by swelling tests, thermal, x-ray and SEM analysis. Their microstructure was observed through scanning electron microscopy. Furthermore, for samples containing the anticancer drug,in vitro release studies were performed in pH 7.4 buffer solution.

3D Conformations of Thick Synthetic Polymer Chains Observed by Cryogenic Electron Microscopy.

2019

The backbone conformations of individual, unperturbed synthetic macromolecules have so far not been observed directly in spite of their fundamental importance to polymer physics. Here we report the dilute solution conformations of two types of linear dendronized polymers, obtained by cryogenic transmission electron stereography and tomography. The three-dimensional trajectories show that the wormlike chain model fails to adequately describe the scaling of these thick macromolecules already beyond a few nanometers in chain length, in spite of large apparent persistence lengths and long before a signature of self-avoidance appears. This insight is essential for understanding the limitations o…

Grafting of Molecularly Imprinted Polymer Films on Silica Supports Containing Surface-Bound Free Radical Initiators

2001

Silica particles containing surface-bound free radical initiators have been used as supports for the grafting of thin films of molecularly imprinted polymers (MIPs). This technique offers a means of fine-tuning the layer thickness for improved kinetic properties or enhanced capacity in chromatographic or sensor applications. Thus prepared MIPs imprinted with l-phenylalanine anilide, have been characterized by FT-IR spectroscopy, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), elemental analysis, fluorescence microscopy, and scanning electron microscopy (SEM), providing evidence concerning the reproducibility in each step and the quantity and quality of the grafted…

Synthesis of reactive hyperbranched and star-like polyethers and their use for toughening of vinylester–urethane hybrid resins

2004

A vinylester – urethane hybrid resin (VEUH) was toughened by adding various vinyl-functionalized branched polyethers in 10 and 20 wt%. Two sets of hyperbranched polymers (HBPs) with different branching density were compared with a set of six-arm star polymers. Besides the architecture, the polymers also varied in their characteristics (molecular mass and mass distribution, vinyl/hydroxy ratio). The morphology of the modified VEUH was studied by dynamic-mechanical thermal analysis (DMTA), transmission (TEM) and scanning electron microscopy (SEM). The toughness was characterized by the fracture energy ðGcÞ determined on compact tension specimens at room temperature. It was established that th…

Mode I fracture toughness behavior of hydro-thermally aged carbon fibre reinforced DGEBA-HHPA-PES systems

2012

In this work the Mode I fracture toughness behavior of unidirectional CFRP laminates is investigated by means of Double Cantilever Beam (DCB) tests. The composite samples were manufactured by thermal curing after impregnation of a Carbon fabric with a DGEBA epoxy and anhydride HHPA curing agent. One resin batch was also mixed with a PES thermoplastic monomer to enhance the matrix toughness. Two lots of samples, toughened and un-toughened, were then left to soak in hot water to achieve various degrees of aging. The influence of matrix toughening and hydrothermal aging on the delamination behavior of the composite have then been assessed and correlated with characterization data from Dynamic …

Characterization of ultra-high-molecular-weight polyethylene (UHMWPE) modified by ion implantation

2004

Abstract Surface modification of ultra high molecular weight polyethylene (UHMWPE) is induced by ion implantation of different ions at 300 keV energy. The aim of this work was the chemical, physical and mechanical characterization of the modified material in order to know deep inside about the effect of the ion beam upon the polymer. The irradiated surfaces are investigated by Raman spectroscopy, infrared absorption and micro-hardness analysis, scanning electron microscopy. Pin on disc measurements valuated the wear of the UHMWPE against a stainless steel probe; wear resistance increases of about 76% after the ion implantation. This result can be attributed to the ion bombardment inducing a…

Kultivierung humaner Zellen auf polymerbeschichteten Bioimplantaten?ein neues Konzept zur Verbesserung der Implantateigenschaften

2004

BACKGROUND AND PURPOSE Calcific degeneration with the resulting need for operative replacement remains the major drawback of bioprostheses. Previous studies have shown that cellular surface seeding decreases calcium uptake in vitro and in vivo, but complete coverage remains difficult to achieve. A new approach is presented, masking glutaraldehyde residues with a covalently bound polymer layer thus facilitating cell seeding. The aim of this study was to evaluate different polymers for their ability to promote surface cell adhesion and formation of complete monolayers. MATERIAL AND METHODS Ten ultrathin polymers, covalently bound to glass and exhibiting different physicochemical characteristi…

1986