Search results for "Electrosynthesis"
showing 10 items of 95 documents
Ni alloy nanowires as high efficiency electrode materials for alkaline electrolysers
2021
Abstract The fabrication and characterization of nickel-alloy electrodes for alkaline electrolysers is reported. Three different alloys (Ni–Co, Ni–Zn and Ni–W) at different composition were studied in order to determine the optimum condition. Nanostructured electrodes were obtained by template electrodeposition into a nanoporous membrane, starting from aqueous solution containing the two elements of the alloy at different concentrations. Composition of alloys can be tuned by electrolyte composition and also depends on the difference of the redox potential of elements and on the presence of complexing agents in deposition bath. Electrochemical and electrocatalytic tests, aimed at establishin…
Electrosynthesis and properties of poly(3,4-ethylenedioxythiophene) films functionalized with titanocene dichloride complex
2006
Synthesis of a titanocene dichloride derivative functionalized with 3,4-etylenedioxythiophene group, Tc1EDOT (Cl 2TiCpC5H4(CH2) (3,4ethylenedioxythiophene)) has been described. Redox behavior of the monomer in tetrahydrofuran (THF), dichloromethane (DCM) and acetonitrile (AN) at different scan rates has been discussed in terms of different ability of these solvents to coordination with the reduced titanocene (Tc) complex and the solvation of Cl − anions. Electrooxidation of Tc1EDOT to get a conducting polymer film with immobilized titanocene dichloride centers and electrochemical properties of its polymer matrix in background acetonitrile solution have been compared with those of non-substi…
Nanostructured Ni–Co alloy electrodes for both hydrogen and oxygen evolution reaction in alkaline electrolyzer
2021
Abstract Ni–Co alloy nanostructured electrodes with high surface area were investigated both as a cathode and anode for an alkaline electrolyzer. Electrodes were obtained by template electrosynthesis at room temperature. The electrolyte composition was tuned in order to obtain different NiCo alloys. The chemical and morphological features of nanostructured electrodes were evaluated by EDS, XRD and SEM analyses. Results show that electrodes with different composition of Ni and Co, made of nanowires well anchored to the substrate, were obtained. For both hydrogen and oxygen evolution reactions, electrochemical and electrocatalytic tests, performed in 30% w/w KOH aqueous solution, were carried…
Nanostructured anode material for Li-ion batteries
2010
The present paper focuses on a nanostructured SnCo alloy electrochemically prepared by template method in view of its use as anode material alternative to graphite in lithium-ion batteries. The fabrication of SnCo nanowire arrays was carried out by potentiostatic co-deposition of the two metals by using nanostructured anodic alumina membranes as template. Electrochemical tests on lithiation-delithiation of these SnCo electrodes in conventional organic electrolyte (EC:DMC LiPF6) at 30°C showed that their specific capacity was stable for about the first 12 cycles at a value near to the theoretical one for Li22Sn5 and, hence, progressively decayed.
Use of Diamond Films in Organic Electrosynthesis
2011
Characterization of Sn-Co nanowires grown into alumina template
2009
Nanowires of Sn-Co alloys were grown inside the channels of anodic alumina membrane by potentiostatic deposition. The scanning electron microscope images showed the formation of cylindrical nanowires whose height was increasing with deposition time. The X-ray patterns did not show significant diffraction peaks, suggesting the formation of amorphous phases. The higher content of Co in the nanowires, in comparison to the initial composition of the electrolytic bath, was attributed to a higher rate of Co electrodeposition. These nanowires seem to possess specific features suitable for innovative application in the field of Li-ion batteries due to their dimensional stability and high specific s…
Electrochemical reactivity of magnesium porphine : functionalization, oligo-polymerization and application to the synthesis of porphyrins and multi-p…
2012
This work deals with the redox reactivity of magnesium porphine, the study of its electropolymerization and resulting materials, of its functionalization by nucleophiles as well as the mechanistic investigation of the C-C oxidative coupling on a tris-meso-substituted porphyrin model.The electrochemical oxidation of magnesium porphine to its cation radical leads to oligomers in solution and polymers on the electrode, which molecular structure depends on the imposed potential. The reactivity of the cation radical has also been exploited by adding sufficient amount of nucleophiles (pyridine and triphenylphosphine) in the reactional in order to inhibit the oligomerization/polymerization process…
CuZnSnSe NANOTUBES AND NANOWIRES BY TEMPLATE ELECTROSYNTHESIS
2014
In this work we present some results of an extensive investigation aimed to find suitable conditions to grow CuZnSnSe (CZTSe) nanostructures through single-step electrodeposition into the channels of polycarbonate membranes. After the optimization of several electrodeposition parameters, we have found that pulsed current deposition, between 0 and -1 mA cm-2, is the best way to obtain CZTSe nanostructures mechanically attached to the support. An interesting result concerns the effect of supporting electrolyte in the deposition bath. In fact, changing its concentration it is possible to vary morphology of nanostructures from nanotubes to nanowires. In both case uniform arrays of ordered nanos…
Metodi elettrochimici per la preparazione di nanostrutture in membrane di allumina anodica
2008
Template electrosyntesis of CeO2 nanotubes
2007
Nanotube arrays of CeO2 were produced in a single step by potentiostatic electrochemical deposition from a non-aqueous electrolyte, using anodic alumina membrane templates. The CeO2 nanotubes showed a polycrystalline structure, and they were assembled in the membrane nanochannels. The nanotubes had somewhat uniform diameters, with an average external value of about 210 nm, and a maximum length of about 60 µm; the latter parameter was controlled by the electrodeposition time. Each single nanotube was found to consist of crystalline grains having a size of about 3 nm. Raman analysis shows that these CeO2 nanotubes are suitable for catalytic applications.