Search results for "Energy engineering"
showing 10 items of 1099 documents
Application of silicon-based camera for measurement of non-homogeneous thermal field on realistic specimen surface
2019
Abstract The high-cost low-resolution infrared cameras operating in middle infrared spectral ranges are widely used to detect the thermal fields. In this study, a low-cost high-resolution silicon-based sensor camera operating in near infrared spectral ranges is used to perform the observation of the thermal fields on the realistic steel specimen surface. In near-infrared spectral ranges, a small temperature variation led to a large modification in the sensor illumination, inducing acquired images with over saturation or poor dynamic range of gray levels. To address this problem, an algorithm was used to precisely adjust the exposure time to acquire images with constant gray level whatever t…
SnCo nanowire array as negative electrode for lithium-ion batteries
2011
Abstract Amorphous SnCo alloy nanowires (NWs) grown inside the channels of polycarbonate membranes by potentiostatic codeposition of the two metals (SnCo- PM ) were tested vs. Li by repeated galvanostatic cycles in ethylene carbonate-dimethylcarbonate – LiPF 6 for use as negative electrode in lithium ion batteries. These SnCo electrodes delivered an almost constant capacity value, near to the theoretical for an atomic ratio Li/Sn of 4.4 over more than 35 lithiation–delithiation cycles at 1 C. SEM images of fresh and cycled electrodes showed that nanowires remain partially intact after repeated lithiation–delithiation cycles; indeed, several wires expanded and became porous. Results of amorp…
Semitransparent Perovskite Solar Cells for Building Integration and Tandem Photovoltaics: Design Strategies and Challenges
2021
Over the past decade, halide perovskite systems have captured widespread attention among researchers since their exceptional photovoltaic (PV) performance was disclosed. The unique combination of optoelectronic properties and solution processability shown by these materials has enabled perovskite solar cells (PSCs) to reach efficiencies higher than 25% at low fabrication costs. Moreover, PSCs display enormous potential for modern unconventional PV applications, since they can be made lightweight, semitransparent (ST), and/or flexible by means of appropriate design strategies. In particular, by enabling transparency and high efficiency simultaneously, ST-PSCs hold great promise for future ve…
Peltier cells as temperature control elements: Experimental characterization and modeling
2014
Abstract The use of Peltier cells to realize compact and precise temperature controlled devices is under continuous extension in recent years. In order to support the design of temperature control systems, a simplified modeling of heat transfer dynamics for thermoelectric devices is presented. By following a macroscopic approach, the heat flux removed at the cold side of Peltier cell can be expressed as Q ˙ c = γ ( T c − T c eq ) , where γ is a coefficient dependent on the electric current, Tc and T c eq are the actual and steady state cold side temperature, respectively. On the other hand, a microscopic modeling approach was pursued via finite element analysis software packages. To validat…
Thickness-dependent properties of ultrathin bismuth and antimony chalcogenide films formed by physical vapor deposition and their application in ther…
2021
This work was supported by the European Regional Development Fund (ERDF) project No 1.1.1.1/16/A/257. J. A. acknowledges the ERDF project No. 1.1.1.2/1/16/037. Institute of Solid State Physics, University of Latvia, Latvia as the Center of Excellence has received funding from the European Union's Horizon 2020 Framework Programme H2020-WIDESPREAD-01-2016-2017 TeamingPhase2 under grant agreement No. 739508, project CAMART2 . The raw/processed data required to reproduce these findings cannot be shared at this time as the data also form a part of an ongoing study.
Structural and electrical properties of magnetron sputtered Ti(ON) thin films:The case of TiN doped in situ with oxygen.
2009
International audience; Incorporation of oxygen into TiN lattice results in formation of titanium oxynitrides, TiOxNy that have become particularly interesting for photocatalytic applications. Elaboration as well as characterization of TiN and in situ oxygen-doped thin films is the subject of this paper. Thin films, 250–320nm in thickness, have been deposited by dc-pulsed magnetron reactive sputtering from Ti target under controllable gas flows of Ar, N2 and O2. Optical monitoring of Ti plasma emission line at = 500nm has been implemented in order to stabilize the sputtering rate. Scanning electron microscopy (SEM), X-ray diffraction in grazing incidence (GIXRD), micro-Raman spectroscopy, X…
Semi-continuous feeding and gasification of alfalfa and wheat straw pellets in a lab-scale fluidized bed reactor
2015
Abstract Small scale air-blown fluidized bed gasification of alfalfa and wheat straw pellets were conducted for semi-continuous solid feeding and range of operating conditions varied due to the modifications in equivalence ratio (ER) (0.20–0.35) achieved both by varying solid and air input. Alfalfa pellets displayed an improvement in several gasification variables such as gas lower heating value (∼4.1 MJ/Nm3), specific gas yield (1.66 Nm3/kg), cold gas efficiency (∼42%) and carbon conversion efficiency (∼72%) as ER maximized to 0.35 which was found optimum for this feedstock for the present course of experiments. Gasification parameters of wheat straw pellets on the other hand were characte…
Numerical modeling and validation of hydrothermal liquefaction of a lignin particle for biocrude production
2021
Abstract Lignin liquefaction process under catalyst-free conditions in a temperature range from 573 K to 647 K is investigated with this mathematical model. Based on the theoretical understanding of the physical and chemical processes of the liquefaction process in subcritical temperatures, a comprehensive mathematical model for the decomposition of lignin by hydrolysis reaction pathway is developed on the results of a series of batch experiments. The model consists of four main sections. They are liquefaction of lignin particle, oily film, and inorganic (ash) layer formation behavior during the liquefaction, kinetic model to model further liquefaction process of initial products, and the l…
A model of biomass char gasification describing the change in catalytic activity of ash
2012
A comprehensive description of catalytic effects during char gasification under various conditions relevant to biomass gasification was made. A three-parallel reaction model was proposed to describe the dynamic change in catalytic activity of ash during gasification of biomass char particles. Three different regimes of conversion were identified by analyzing char reactivity experiments conducted in a vertical TGA with nine biomasses under a wide range of operating conditions (temperature: 1023–1123 K, pressure: 0.1–3.0 MPa and gasification mixtures of CO2–CO–H2O–H2): (1) catalytic char gasification with deactivation of catalyst, (2) non-catalytic char gasification, and (3) catalytic char ga…
Metal Chalcohalides: Next Generation Photovoltaic Materials?
2021
Metal chalcohalides have recently been highlighted as so-far overlooked semiconductors that could play an important role in the future of photovoltaics (PV). Indeed, the blooming field of emergent PV technologies is still in search for stable, efficient, and environmentally-friendly light-harvesting materials to be used either in single-junction solar cells or multijunction devices in combination with silicon or another absorbers. Under the broad terms of metal chalcohalides, there exists a plethora of semiconductor materials with different chemical, structural, and optoelectronic characteristics. While some have already been implemented in solar cells with power conversion efficiencies up …