Search results for "Energy engineering"
showing 10 items of 1099 documents
Hydrodynamics of the cocurrent downflow of a gas and a foaming liquid through a packed bed. Part I. Estimation of the transition boundary between the…
2004
Abstract In the study the results of investigations are presented aimed at determining such values of the operating parameters for which the change of the hydrodynamic regime occurs from the gas continuous flow (GCF) to the pulsing flow (PF). Nitrogen, helium and argon were used as the gas phase while the liquid phase was formed by the aqueous solutions of the alcohols C 1 –C 4 of the concentrations which ensured the foaming of the system. Thus a wide range of physicochemical properties of the system was covered in the experiments. The present study, as well as Part II, contain a wealth of experimental data which characterise the PF through the packing for the foam-forming systems. It is de…
Hydrodynamics of a cocurrent downflow of gas and foaming liquid through the packed bed. Part II. Liquid holdup and gas pressure drop
2003
Abstract In the present study the results of experiments have been presented whose aim was to determine the values of liquid holdup as well as gas pressure drop through the packing for systems foaming under the pulse flow regime. On the basis of 245 experimental points for the pulse flow regime the verification of the models describing the hydrodynamics of the system has been performed. Attention was focused on the models of Benkrid et al. (Chem. Eng. Sci. 52 (1997) 4021), Pina et al. (AIChE J. 47 (2001) 19) and Fourar et al. (Chem. Eng. Sci. 56 (2001) 5987). It has been concluded that none of the models analysed describes the hydrodynamics of the foaming systems with enough accuracy. Next,…
Development of a Higee bioreactor (HBR) for production of polyhydroxyalkanoate: Hydrodynamics, gas–liquid mass transfer and fermentation studies
2010
Abstract This study addresses the hydrodynamics and mass transfer characterisation of a Higee bioreactor (HBR) for application to polyhydroxyalkanoate (PHA) production from Pseudomonas putida KT2442 fermentation. The motivation for this work is to address the potential oxygen transfer limitations which can severely impede the progress of this aerobic fermentation process and reduce PHA productivity in conventional bioreactors. It is shown that a maximum of 2.5 transfer units can be achieved in an oxygen-stripping operation where the presence of packing, higher rotor speeds, higher air flowrates and lower liquid flowrates all have a positive influence on the number of transfer units (NTU). W…
An integrated multiobjective design tool for process design
2006
An integrated multiobjective design tool has been developed for chemical process design. This tool combines the rigorous process calculations of the BALAS process simulator and the interactive multiobjective optimization method NIMBUS. With this design tool, the designer can consider several conflicting performance criteria simultaneously. The interactive nature of this tool allows the designer to learn about the behavior of the problem. To illustrate the possibilities of this design tool, two case studies are considered. One of them is related to paper making while the other one is related to power plants.
Protection of the European Energy Consumers’ Rights within the Globalization Context
2015
Abstract The ambivalence of globalization determines the consumer to comply with the legislation of the nation state as well as the UE legislation through the norms of the European Parliament regarding the rights of the European consumer, the labelling in the energetic field and the European Book of the consumer of energy. The consumers have the essential information that are to allow the attaining of objectives referring to the hedging of vulnerable citizens, less red tape, changing of the supplier, more information but also consumers’ hedging against the selling practices of non-loyal selling practices. The main objectives of the article aim at outlining the main theoretical methodologica…
Hereditariness of Aortic Tissue: In-Vitro Time-Dependent Failure of Human and Porcine Specimens
2018
This study aims to investigate the time dependent failure of aortic tissues for pathological and healthy samples by biomechanical testing. The experimental campaign has involved human pathological tissue and healthy swine tissue as preliminary study towards the development of novel failure criteria.
Concrete thermal energy storage for linear Fresnel collectors: Exploiting the South Mediterranean’s solar potential for agri-food processes
2018
Abstract Italy is celebrated in the world for its agri-food industries while the process of production of pasta is highly energy demanding and requires both electrical and thermal energy simultaneously. Because most of the Italian factories producing pasta are located in the Southern part of the country, the direct use of thermal energy generated from the sun would be particularly profitable. In this study, the authors examine the possibility of generating by a Solar Industrial Process Heating plant the thermal energy required annually by an existing factory that produces durum wheat pasta located in Sicily (Italy). The hypothesized plant scheme consists of an array of Fresnel linear solar …
Particle size based recovery of phosphorus from combined peat and wood fly ash for forest fertilization
2016
Abstract Correlations between the concentrations of P, K, and As with particle size in fly ash from power plants were examined with a viewpoint to obtain fractions suitable for forest fertilization. Fly ash samples from several CHP plants were fractionated by using four sieves and the five fractions were analyzed by ICP-OES; it was found that both P and K are concentrated in smallest size (
Importance of iron and aluminium in rapid and slow combustion of peat
1990
Abstract The effects of Fe and Al on peat combustion and the formation of nitrogen oxides were studied under conditions of rapid combustion in an entrained flow reactor, and under conditions of slow combustion in a thermobalance and a differential scanning calorimeter. Iron had a strong catalytic effect on both the slow and rapid combustion, and it decreased the ratio of N2O to NO in the combustion gases. A decrease in the content of inorganic compounds decreased reactivity, probably because of the decrease in iron content. Aluminium did not have a detectable catalytic effect on the combustion rate but it depressed the formation of nitrogen oxides slightly. The chemical treatment to increas…
The Consumer Resistance Behavior towards Innovation
2013
Abstract The purpose of this work is to identify and analyze consumer resistance in order to understand this concept in the area of resistant behavior. The paper converges on studying the resistance to innovation from a theoretical perspective and to show it importance in innovation process. The paper concludes bydescribing the complexity of resistance to innovation, its forms and effects on the behavior of consumers and market. Although most authors focus their research on positive adoption decisions, this paper instead focus on developing insight into the relatively underdeveloped area of resistant behavior literature by presenting key concepts of resistance to innovation.