Search results for "Epoxy"
showing 10 items of 384 documents
Development of Composites with a Self-Healing Function
2015
This research aimed to realize experimentally the facilevascular self-healing system in epoxy glass fibre reinforced composite. Using flexiblepolytetrafluoroethylene tubes as removable preforms, the channels were embeddedinto both neat epoxy resin and unidirectional glass-fibre reinforced epoxy laminate.Room temperature curable epoxy resin with a surfactant and an amine-basedhardener were the components of the binary healing agent. The specimens oftapered double cantilever beam geometry were subjected to Mode I fracture tests.Fracture of specimens released the healing agent from channels and triggeredself-healing process of the crack. Tested neat epoxy resin specimensdemonstrated recovery o…
Effect of Stacking Sequence and Sodium Bicarbonate Treatment on Quasi-Static and Dynamic Mechanical Properties of Flax/Jute Epoxy-Based Composites
2019
The present paper deals with the investigation of quasi-static and dynamic mechanical response of epoxy-based composites reinforced with flax and/or jute plain weave fabrics. In order to evaluate the influence of the stacking sequence, two monolithic laminates reinforced with flax or jute fibers and two hybrid flax/jute laminates were manufactured through the vacuum infusion technique. Furthermore, an eco-friendly and cost-effective surface treatment based on fiber soaking in a sodium bicarbonate solution was employed to improve the fiber-matrix adhesion. The mechanical characterization (by means of quasi-static flexural, dynamic mechanical thermal analysis and Charpy impact tests) allowed …
Synthesis and biological evaluation of sphingosine kinase 2 inhibitors with anti-inflammatory activity.
2019
The synthesis of inhibitors of SphK2 with novel structural scaffolds is reported. These compounds were designed from a molecular modeling study, in which the molecular interactions stabilizing the different complexes were taken into account. Particularly interesting is that 7‐bromo‐2‐(2‐phenylethyl)‐2,3,4,5‐tetrahydro‐1,4‐epoxynaphtho[1,2‐b]azepine, which is a selective inhibitor of SphK2, does not exert any cytotoxic effects and has a potent anti‐inflammatory effect. It was found to inhibit mononuclear cell adhesion to the dysfunctional endothelium with minimal impact on neutrophil–endothelial cell interactions. The information obtained from our theoretical and experimental study can be us…
Steroid activities comparison of natural and food wrap compounds in human breast cancer cell lines
2004
Abstract In this study, we tested and compared the endocrine disruption activities of compounds in materials used to package foods (bisphenol A, bisphenol F, and bisphenol A diglycidylether BADGE) with natural molecules (genistein, apigenin, kaempferol, and tangeretin) in the human breast cancer cell lines MCF-7 (ER + ) and MDA-MB453 (AR + ; GR + ). Octylphenol was also chosen as a xenoestrogen reference. Two compounds had no estrogenic activity: BADGE and tangeretin. Genistein was the most active compound in the E-Screen assay with MCF-7, followed by octylphenol, bisphenol F, bisphenol A and apigenin, with kaempferol the least potent. All estrogenic compounds competed with 17β-estradiol fo…
Influence Des Conditions De Fabrication Sur Les Propriétés Mécaniques Et Physico-Chimiques D'un Composite Lin/Époxy Unidirectionnel
2017
This study focused on the development of a manufacturing process of laminated composites made from DGEBA epoxy matrix and flax fibers. The aim is to produce a material with good and low dispersed mechanical properties. Thermocompression is the chosen manufacturing method because it enables the production of composite with high fiber content. We used separated matrix and reinforcement, and not a prepreg, to fully control each component of our composites. Several curing cycle parameters have been tested in order to optimize mechanical properties and processing time. A multi-scale analyze has been carried on the produced composites in order to quantify the range of properties’ modifications. T…
: Effects of process conditions on mechanical and physicochemical properties of unidirectional flax/epoxy composite
2017
National audience; This study focused on the development of a manufacturing process of laminated composites made from DGEBA epoxy matrix and flax fibers. The aim is to produce a material with good and low dispersed mechanical properties. Thermocompression is the chosen manufacturing method because it enables the production of composite with high fiber content. We used separated matrix and reinforcement, and not a prepreg, to fully control each component of our composites. Several curing cycle parameters have been tested in order to optimize mechanical properties and processing time. A multi-scale analyze has been carried on the produced composites in order to quantify the range of propertie…
Comparisons of processing and strength properties of two adhesive systems for composite joints
2007
Abstract In the present study rheological, static and impact tests are carried out on two adhesive resins usually employed in marine applications; then single lap joint tests are conducted on composites joints evidencing the effect of the curing time of both resins on the mechanical properties of the joint. The applicability and workability conditions of the adhesive resins are determined evaluating the curing evolution by a preliminary rheological analysis; then the relation of curing properties with the mechanical performances of the resins themselves and with ones of the composite joints is estimated. Static flexural and Izod impact tests are performed on the resins at increasing time af…
On the effectiveness of different additives and concentrations on the re-building of the molecular structure of degraded polyethylene
2006
Mechanical recycling is an easy and economic way to re-use plastic waste as secondary materials, but, in general, their properties are worse with respect to the reclaimed materials and the virgin polymer. The aim of this work was to study the effect of concentration and reaction kinetics of two additives, an ethylene-co-glycidyl methacrylate (Lotader) and a hydroxylamine derivative (CGX), in the re-building of a degraded polyethylene. CGX is a nitroxyl radical generator able to form branching in polyolefins while the epoxy groups of Lotader can react with the functional groups present in the recycled polyethylene. The results indicate that the CGX has a higher reaction rate than Lotader, pr…
Fibre fragment distribution in a single-fibre composite tension test
2001
Abstract Single fibre fragmentation tests are performed for brittle fibres with Weibull strength distribution and different surface treatments. The fragmentation process is modelled and closed-form expressions for break spacing distribution are obtained. The model accounts for the effect of finite fibre length on the initial fragmentation as well as for break interaction on the advanced fragmentation stage. It is assumed that the exclusion zone due to fibre–matrix interface failure and stress recovery in the fibre is linearly dependent on the applied load. This assumption is validated experimentally. The derived theoretical average fragment length dependence on applied load is used to deter…
Thermo-Mechanical Behaviour of Flax-Fibre Reinforced Epoxy Laminates for Industrial Applications
2015
The present work describes the experimental mechanical characterisation of a natural flax fibre reinforced epoxy polymer composite. A commercial plain woven quasi-unidirectional flax fabric with spun-twisted yarns is employed in particular, as well as unidirectional composite panels manufactured with three techniques: hand-lay-up, vacuum bagging and resin infusion. The stiffness and strength behaviours are investigated under both monotonic and low-cycle fatigue loadings. The analysed material has, in particular, shown a typical bilinear behaviour under pure traction, with a knee yield point occurring at a rather low stress value, after which the material tensile stiffness is significantly r…