Search results for "Ethylene"

Capillary Electrophoresis of Free Fatty Acids by Indirect Ultraviolet Detection: Application to the Classification of Vegetable Oils According to The…

2011

A method for the determination of fatty acids in vegetable oils by capillary electrophoresis with indirect UV–vis detection has been developed. The separation of fatty acids was optimized in terms of Brij surfactant nature and concentration and organic modifier (2-propanol) percentage. The optimal background electrolyte consisted of 10 mM p-hydroxybenzoate, 5 mM Tris at pH 8.8, 80 mM Brij 98, 40% acetonitrile, and 10% 2-propanol. Under these conditions, vegetable oils from five botanical origins (avocado, corn, extra virgin olive, hazelnut, and soybean) were analyzed and the fatty acid contents established. Linear discriminant analysis (LDA) models were constructed using fatty acid peak are…

Phase equilibria for the ternary systems ethanol, water+ethylene glycol or+glycerol at 101.3kPa

2013

Abstract Two solvents, ethylene glycol and glycerol, are proposed as possible entrainers for the extractive distillation of the binary azeotropic mixture formed by ethanol and water. In this way, consistent isobaric vapour–liquid equilibrium data at 101.3 kPa were measured for the ternary systems ethanol + water + ethylene glycol and ethanol + water + glycerol. The data were correlated by local compositions models Wilson, NRTL and UNIQUAC. Parameters of these models were later employed to evaluate ability of the candidates to break the original azeotrope. The obtained results led to consider the ethylene glycol and the glycerol as valid entrainers for the extractive distillation process of …

Approach to the 1-propanol dehydration using an extractive distillation process with ethylene glycol

2015

Abstract The extractive distillation process exploits the capacity of some chemicals to alter the relative volatility between the components of a mixture. In this way, a third component (called entrainer) may be added to an azeotropic binary mixture to break the azeotrope. This paper discusses the potential use of ethylene glycol as entrainer in a 1-propanol dehydration process by extractive distillation. First, the present work focuses on the acquisition of isobaric vapor–liquid equilibrium data of the ternary system 1-propanol + water + ethylene glycol system and the binaries systems 1-propanol + ethylene glycol and water + ethylene glycol. All measurements were done at 101.3 kPa. The exp…

Photo-oxidation behaviour of polyethylene/multi-walled carbon nanotube composite films

2009

Effect of electron beam irradiation and plastic deformation on molar mass of medical grade ultra-high molecular weight polyethylene

2010

Badano wpływ sterylizacji metodą napromieniania strumieniem elektronów oraz deformacji plastycznej (zgniatania, rys. 1) polietylenu ultrawielkocząsteczkowego (UHMW-PE), stosowanego do wytwarzania panewek endoprotez stawu biodrowego, na masę molową polimeru. Stwierdzono, że sterylizacja wpływa na utleniającą destrukcję makrocząsteczek polimeru, której stopień zależy od użytej dawki promieniowania (zmniejszenie masy molowej masowo średniej). Procesowi temu towarzyszy sieciowanie makrocząsteczek (wzrost udziału frakcji nierozpuszczalnej). Z kolei sama deformacja plastyczna wydaje się nie mieć wyraźnego wpływu na proces degradacji. Tymczasem łączne zastosowanie obydwu czynników zewnętrznych pro…

The Effect of Impact Pressure on Positron Lifetime in Ultra High Molecular Weight Polyethylene (PE-UHMW)Chirulen®1120

2010

The paper presents the results of investigations of the effect of impact pressure (in the range of both elastic and plastic deformations) on the parameters of the positron lifetime spectra in PE-UMHW polymer known under the trade mark Chirulen1120. The changes in the long-living component of the positron lifetime spectrum, connected with the annihilation of o-Ps in the pick-off process, are analyzed in dependence on the impact energy. The impact duration in the Charpy’s tests depending on the impact energy was measured, too. The dependencies of the radius of the volume of empty spaces in which the positronium annihilates, on the impact pressure were determined applying the Eldrup-Tao model.

Immobilization of natural anti-oxidants on carbon nanotubes and aging behavior of ultra-high molecular weight polyethylene-based nanocomposites

2014

The use of natural antioxidants is an attractive way to formulate nanocomposites with extended durability and with potential applications in bio-medical field. In this work, Vitamin E (VE) in the form of α-tocopherol and Quercetin (Q) are physically immobilized on the outer surface of multi-walled carbon nanotubes (CNTs). Afterward, the CNTs-VE and CNTs-Q are used to formulate thermally stable ultra high molecular weight polyethylene based nanocomposites. The obtained results in the study of the thermo-oxidation behavior suggest a beneficial effect of the natural anti-oxidant carbon nanotubes systems. The unexpected excellent thermo-resistance of the nanocomposites seems to be due to a syne…

α-Tocopherol-induced radical scavenging activity in carbon nanotubes for thermo-oxidation resistant ultra-high molecular weight polyethylene-based na…

2014

?-Tocopherol, a natural antioxidant molecule, was physically immobilized on the outer surface of multi-walled carbon nanotubes (CNTs), and the resulting functionalised particles (f-CNTs) were dispersed in ultra-high molecular weight polyethylene aiming at improving its thermo-oxidation resistance. The success of the functionalization was assessed through spectroscopic and thermal analysis, and the influence of the filler on the thermo-oxidative stability of the nanocomposites was investigated through rheological analyses and infrared spectroscopy. We found that the addition of only 1 wt.% of f-CNTs brings about a surprisingly high oxidation resistance, with a five/ten-fold increase of the i…

Synthesis of Ultra-High-Molecular-Weight Polyethylene

1984

The catalytic activity of organometallic Ti-Al complexes with donor ligands in the low-pressure polymerization of ethylene was studied. These complexes were obtained by the reaction of ethylaluminium compounds like AlEt2Cl or Al2Et3Cl3 and titanium compound of the type Ti(OR)nCl4-n (where: R = C2—C10 alkyl, C6H5, C6H4X; X — m-CH3, p-CH3, m-OCH3, p-OCH3, m-Cl, p-Cl, p-Br; n = 1—4). The optimum conditions for the synthesis of these compounds, as well as their physico-chemical properties were studied by means of EPR and polarographic methods. The effect of the type and number of OR ligands in a catalytic system on the yield of polyethylene and on its properties was examined. Ti-Al catalysts wi…

Influence of photo-initiators in the preparation of methacrylate monoliths into poly(ethylene-co-tetrafluoroethylene) tubing for microbore HPLC.

2020

[EN] In this study, poly(butyl methacrylate-co-ethyleneglycol dimethacrylate) polymeric monoliths were in situ developed within 0.75 mm i.d. poly(ethylene-co-tetrafluoroethylene) (ETFE) tubing by UV polymerization via three different free-radical initiators fscce-azobisisobutyronitrile (AIBN), 2,2-dimethoxy-2-phenylacetophenone (DMPA) and 2-methyl-4'-(methylthio)-2-morpholinopropiophenone (MTMPP). The influence of the nature of each photo-initiator and irradiation time on the morphological features of the polymer was investigated by scanning electron microscopy, and the chromatographic properties of the resulting microbore columns were evaluated using alkyl benzenes as test substances. The …