Search results for "Etre"

Dense nanostructured materials obtained by spark plasma sintering and field activated pressure assisted synthesis starting from mechanically activate…

2004

The preparation of highly dense bulk materials with a grain size in the range of a few to a few hundreds nanometers is currently the objective of numerous studies. In our research we have achieved a measure of success in this regard by using the methods of mechanically-activated, field-activated, pressure-assisted synthesis, MAFAPAS, which has been patented, and mechanically-activated spark plasma sintering, MASPS. Both methods, which consist of the combination of a mechanical activation step followed by a consolidation step under the simultaneous influence of an electric field and mechanical pressure, have led to the formation of dense nanostructured ceramics, intermetallics, and composite…

Precursor-based synthetic pathways to nanometer NdNiO3−x particles

1993

Abstract The oxygen deficient neodymium nickel perovskite, NdNiO3−x, has been obtained by different low temperature-low oxygen pressure synthetic procedures. Besides a solid-matrix based route, both ordered and disordered chemical-precursors have been used as starting products. X-ray powder diffraction shows that the structure of this defective perovskite is orthorhombic. The study of the grain morphology of the products as resulting from the different synthetic procedures indicates that the main parameter determining the average particle size, which is in the nanometer range, is the maximum temperature achieved in the synthesis. Resistivity and DSC measurements show the existence of a meta…

Autohydrolysis pretreatment of Arundo donax: a comparison between microwave-assisted batch and fast heating rate flow-through reaction systems

2015

Background: Autohydrolysis of lignocellulosic biomass in liquid hot water has been widely studied owing to its high efficiency and relatively low cost. In the perspective of industrial applications, continuous or semi-continuous processes are more interesting than batch systems. Moreover, microwave heating of pretreatment systems has been proposed to intensify the kinetics of the process. In this study, the autohydrolysis of Arundo donax was performed in pure liquid hot water using a microwave-heated batch reactor and a semi-continuous flow-through reaction system with fast heating rate at the same operating conditions with the aim of performing a systematic comparison between the two diffe…

Ceramic/metal nanocomposites by lyophilization: Spark plasma sintering and hardness

2014

The present study is focused on the procedure of spray-drying and lyophilization techniques for the preparation of ceramic/metal nanocomposites. The results of the study at all stages are compared with those corresponding to powders conventionally dried by heating in furnace. Starting from aqueous solutions of metal salts and ceramic powders, the procedure follows with spray-drying, lyophilization, calcination of the resulting powders and subsequent Spark Plasma Sintering (SPS). X-ray diffraction analysis of the powders at different stages of the processing routes was used for phase indexing; further characterization was performed by Transmission Electron Microscopy and Energy Dispersive X-…

Nonlinear Transport in Hybrid Polypyrrole–Gold Nanostructures

2010

We have studied charge transport in nanometer scale films of polypyrrole (PPy) that were grown electrochemically onto discontinuous ultrathin films of gold. The gold films consisted of 100 nm size islands, separated from each other by nanometer-size gaps. The thickness of PPy can be varied from 30 to 200 nm. The I-V characteristics of these hybrid PPy-Au nanostructures show strong non-linearity at low temperatures, and in particular for the more insulating samples. The hopping transport is further verified from the log / versus V-1/4 plots. Furthermore, the I-V data follow an empirical relation dlog//dV(1/4) similar to T-1/2.

Mechanical properties of the nanometer scale pre-crystalline order of a poly (ethylene terepthalate) / poly (ethylene naphthalene) blend

2006

A previous study carried out on PET has shown that this polymer undergoes a continuous structural modification over a wide cooling rate interval when solidified from the melt[1] assuming a semi-crystalline structure below 2 K s 1 and a completely amorphous one above 100 K s 1. Most important was the existence of a state of intermediate order between the above cooling rates which was evidenced by the absence of crystalline reflections in the WAXS patterns and the occurrence of SAXS maxima[2] and exothermic peak areas (DSC) in the cooling rate range above 2 K s 1. Microhardness (MH) measurements revealed that this phase affects the mechanical properties[3] plausible if one thinks of crystalli…

Micrometer-resolution reconstruction and analysis of whole mouse brain vasculature by synchrotron-based phase-contrast tomographic microscopy

2021

AbstractNervous tissue metabolism is mainly supported by the dense thread of blood vessels which mainly provides fast supplies of oxygen and glucose. Recently, the supplying role of the brain vascular system has been examined in major neurological conditions such as the Alzheimer’s and Parkinson’s diseases. However, to date, fast and reliable methods for the fine level microstructural extraction of whole brain vascular systems are still unavailable. We present a methodological framework suitable for reconstruction of the whole mouse brain cerebral microvasculature by X-ray tomography with the unprecedented pixel size of 0.65 μm. Our measurements suggest that the resolving power of the techn…

Scattering perspectives on nanostructural inhomogeneity in polymer network gels

2017

Abstract Scattering methods based on spatial and temporal contrast fluctuations in polymer-network gels, which originate from polymer-segmental density fluctuations, reveal rich insight into different types and levels of nanostructural inhomogeneity in these soft materials. Complementary contrasting as provided by light, neutron, and X-ray scattering allows such information to be obtained on nano- to micrometer length scales. On top of that, complementary use of static and dynamic scattering methods allows the interplay and effect of these inhomogeneities to be unraveled. This article interrelates a multitude of studies on the application of scattering techniques for analytical assessment o…

The synthesis of micrometer- and submicrometer-size spheres of ordered mesoporous oxide MCM-41

1997

Control of the Properties of Micrometer-Sized Actuators from Liquid Crystalline Elastomers Prepared in a Microfluidic Setup

2010

In this article new results on the preparation of monodisperse particles from a liquid crystalline elastomer in a microfluidic setup are presnted. For this, droplets from a liquid crystalline monomer are prepared in a microfluidic device and polymerized while they are flowing inside a microtube. The parti­cles obtained by this method possess an internal orientation, which gives them actuating properties. When they are heated into the isotropic phase of the liquid crystalline material they show a reversible change in shape whereby they change their length in one direction by almost 100%. It is shown how the variation of experimental parameters during their synthesis impacts the properties of…