Search results for "FFR"
showing 10 items of 1798 documents
Sixfold coordinated phosphorus by oxygen in AlPO4 quartz homeotype under high pressure.
2007
International audience; AlPO4 belongs to the berlinite quartz homeotype family, which has been the subject of intense high pressure research triggered by the supposed existence of reversible pressure induced amorphization. New x-ray diffraction experiments, complemented with ab initio calculations, demonstrate the existence of two high pressure crystalline polymorphs and show that AlPO4 share the same two stage densification mechanism as silica. In first place a compact hexagonal sublattice of oxygen atoms is formed. In a second step the cations redistribute in the interstices giving rise to a monoclinic distorted CaCl2 phase. The most outstanding feature of the new phase is that phosphorou…
Iron Doped-ZrSiO4: Structural, Microstructural and Vibrational Characterization
2015
Fex-ZrSiO4 is known for the applications in the ceramic industry such as ceramic pigment. In this article, we focus our attention to the structural, microstructural and vibrational changes of Fex-ZrSiO4 from free-mineralizer precursors, treated at different temperatures in the range of 1100-1600 °C. The refinements of X-ray diffraction patterns show that Fe3+ cations were distributed into tetrahedral sites replacing Si4+. The evolution of the shape distribution analyzed by transmission electron microscopy, reveal a polyhedral morphology at 1100 °C during 3h. In comparison, well-rounded and homogeneous particle size was determined in the sample heated at 1600 °C during 24 h. On the other han…
Liquid crystal spatial light modulator with very large phase modulation operating in high harmonic orders.
2013
Unusually large phase modulation in a commercial liquid crystal spatial light modulator (LCSLM) is reported. Such a situation is obtained by illuminating with visible light a device designed to operate in the infrared range. The phase modulation range reaches 6π radians in the red region of the visible spectrum and 10π radians in the blue region. Excellent diffraction efficiency in high harmonic orders is demonstrated despite a concomitant and non-negligible Fabry–Perot interference effect. This type of SLM opens the possibility to implement diffractive elements with reduced chromatic dispersion or chromatic control.
Mechanically Activated SHS Reaction in the Fe-Al System: In Situ Time Resolved Diffraction Using Synchrotron Radiation
1998
The Mechanical Activation Self propagating High temperature Synthesis (M.A.S.H.S.) processing is a new way to produce nanocrystalline iron aluminide intermetallic compounds. This process is maily the combination of two steps ; in the one hand, a mechanical activation where the Fe - Al powder mixture was milled during a short time at given energy and frequency of shocks and in the other hand, a Self propagating High temperature Synthesis (S.H.S.) reaction, for which the exothermicity of the Fe + Al reaction is used. This fast propagated MASHS reaction has been in -situ investigated using the Time Resolved X - Ray Diffraction (TRXRD) using a X - ray synchrotron beam and an infrared thermograp…
Investigation of mechanically activated field-activated pressure-assisted synthesis processing parameters for producing dense nanostructured FeAl
2003
The parameters of the mechanically activated field-activated pressure-assisted synthesis (MAFAPAS) process, which were recently developed and patented for producing dense nanostructured materials, were studied in the case of the B2-FeAl intermetallic. Based on x-ray diffraction (XRD) experiments, residual stresses XRD analysis, relative density measurement, and secondary-electron microscopic observations, the optimal synthesis conditions (time, current intensity, and pressure) were studied. Fe + Al powders were comilled in a specially designed planetary mill to obtain a mixture of reactants at the nanoscale without the formation of any product. The milled mixtures were then subjected to a h…
Enhancement of self-sustaining reaction by mechanical activation: case of an FeSi system
1999
Mechanical high energy ball milling of an Fe2Si elemental powders mixture was used to activate a self sustaining combustion reaction or so-called self-propagating high-temperature synthesis (SHS) to form iron disilicide, a reaction for which the thermodynamic criterion is not favorable. A complete characterization of the milled powders before reaction was performed with energy dispersive X-ray spectrometry, specific surface measurements and X-ray diffraction profile analysis. Thermal and structural information describing the combustion front initiated by heating up a sample to 400°C in a Fe‐Si system is communicated. In order to isolate the phases involved in the gasless reaction, a time-re…
An Experimental Investigation of Residual Stresses in Hard Machining of AISI 52100 Steel
2011
In this paper an experimental investigation was conducted to determine the effects of the tool cutting-edge geometry, workpiece hardness, cutting speed, and microstructural changes (white and dark layers) on the residual stresses in dry orthogonal hard machining of AISI 52100 steel. X-ray diffraction technique was used to obtain in-depth residual stresses profiles in both axial and circumferential directions. The results show that tool geometry, workpiece hardness and cutting parameters significantly affect the surface residual stress, maximum compressive residual stress below the machined surface and its location. Moreover, microstructural analysis shows that thermally-induced phase transf…
X-ray diffraction microstructure analysis of mullite, quartz and corundum in porcelain insulators
2005
Abstract The X-ray diffraction microstructure analysis has been performed on commercial samples of the silica and alumina porcelain insulators obtained at 1300 °C, with the same time of firing. The study was carried out on mullite, corundum and quartz by applying several integral breadth methods (i.e. the Williamson–Hall analysis, the Langford method and the Halder–Wagner approximation) and the Fourier analysis (Warren–Averbach method). The apparent crystallite sizes determined for the mullite are direction-dependent (anisotropic) and within each group of samples, on average, the greatest values are obtained along the direction [0 0 1]. With regard to the microstructure of the corundum and …
Facile Large Scale Synthesis of WS2 Nanotubes from WO3 Nanorods Prepared by a Hydrothermal Route.
2005
Abstract Hexagonal WO 3 nanorods of 5–50 nm in diameter and 150–250 nm in length have been synthesised in gram quantities by a low temperature hydrothermal route using citric acid as a structural modifier and hexadecylamine as a templating agent. The ratio of [A]/[W] play an important role on WO 3 nanorods formation. These WO 3 nanorods were found highly suitable as a precursor for the synthesis of a good yield of multiwalled WS 2 nanotubes by reducing them with H 2 S at 840 °C for 30 min. The length and the wall thickness of the WS 2 nanotubes could be altered by controlled reduction of the oxide precursor. The morphology, structure and the composition of the WO 3 nanorods and WS 2 nanotub…
Electrical Characterization of the Fe-Doped BT Ceramics by an Impedance Spectroscopy
2015
The electric properties of the Fe - doped BaTiO3 ceramics was investigated as a function of frequency and temperature. The structure and morphology of investigated sample were characterized by an X-ray diffraction and scanning electron microscopy. The impedance measurements were carried out at the temperature ranging from 450 K to 600 K, and at the frequency range from 0.1 Hz to 10 MHz. Based on these parameters the electrical properties of the grains and grains boundaries were described. The bulk and grains boundaries resistance of ceramics and the thermal activation energies were determined.