Search results for "FLE"
showing 10 items of 3517 documents
Particle distribution in dilute solid liquid unbaffled tanks via a novel laser sheet and image analysis based technique
2013
The availability of experimental information on particle distribution inside stirred tanks is a topic of great importance for many industrial applications such as catalysis and polymerization. The measurement of solid particle distribution is not simple and the development of suitable measuring techniques is still an open problem in chemical engineering research. In this work, a non-intrusive optical technique for measuring particle concentration fields in solid–liquid systems is discussed. The “Laser Sheet Image Analysis” (LSIA) technique described here makes use of a laser sheet, a digital camera for image acquisition and a suitable procedure for post-processing. It is able to provide sol…
Material characteristics in the analysis of heated steel beams
1989
Beam fire tests are expensive and complicated. They may be replaced by calculations of the heated beam deflection by means of the method presented in this paper. The following material characteristics in the analysis of the deflection of beams during fire may be taken as fundamental: the steel creep characteristic at elevated temperatures, the modulus of elasticity and the coefficient of thermal expansion. According to the yield hinge theory, the yield stress is the criterion of failure of steel beams in fire. On the other hand, in the analysis of the deflection of the heated steel beams the influence of the yield stress is very small. The influence of the respective material characteristic…
Free-surface shape in unbaffled stirred vessels: Experimental study via digital image analysis
2013
There is a growing interest in using unbaffled stirred tanks for addressing a number of processing needs such as low shear damage (sensitive biocultures), low attrition (solid–liquid applications), deep-cleaning/sterilization (pharmaceutical applications). The main feature of uncovered, unbaffled stirred tanks is highly swirling motion of the fluid that results in a deformation of the free liquid surface. At sufficiently high agitation speeds the resulting whirlpool reaches the impeller and gives rise to a gas–liquid dispersion, so leading to the formation of a dispersion without the use of gas-sparger; the so-called self-inducing operation of the vessel. In this work, digital image analysi…
Experimental analysis of the contact pressure distribution in an off-road tyre
2009
In this paper the results of experimental tests are shown, lead by extended method of measurement, on a tire for an off-road vehicle 175/82 R16, inserting Prescale paper at the contact with the ground. The experimental analysis of the pressures is lead, in cross-sectional direction, in 5 zones correspondents to the middle of the single dowels constituting the tread. The results are analyzed by means of software predisposed to the scope so as to go back easily to the value of the pressure. The obtained results are critically analyzed and the result are compared with those obtained by the formulas of Rowland and MacLaurin, and by the nominal pressure at ground, concluding that the expression …
Simplified Procedure for Evaluating the Effects of Creep and Shrinkage on Prestressed Concrete Girder Bridges and the Application of European and Nor…
2013
The effects of time-dependent phenomena on concrete prestressed girder bridges are investigated. The study concerns the case of bridges built directly in their final configuration and that of bridges built by a sequence of stages in which geometry, restraints, and loads vary until the final configuration is achieved. An analytical approach based on the principles of aging linear viscoelasticity and the age-adjusted effective modulus method is followed. The paper has two aims: the first is to provide an efficient and simplified tool for the evaluation of the structural response in the early stages of design; the second is to compare the results of the analyses on actual cases of bridges when…
Flexural response of external R.C. beam-column joints externally strengthened with steel cages
2015
Abstract An experimental and theoretical research referred to the flexural behavior of external R.C. joints strengthened with steel cages constituted by steel angles and battens is presented. The subassemblage (beam, column and joint) was subjected to a constant vertical load acting on the column and to a monotonically increasing lateral force applied at the tip of the beam. The control specimen is without strengthening system and it was designed with weak column and strong beam and overstrength in the joint region. Strengthening cases here studied refer to steel caging in the column and both in the beam and in the column. Cyclic response in term of load–displacement curves, crack patterns …
Modeling and Parameter Identification of Deflections in Planetary Stage of Wind Turbine Gearbox
2012
The main focus of this paper is the experimental and numerical investigation of a 750[kW] wind turbine gearbox. A detailed model of the gearbox with main shaft has been created using MSC.Adams. Special focus has been put on modeling the planet carrier (PLC) in the gearbox. For this purpose experimental data from a drive train test set up has been analyzed using parameter identification to quantify misalignments. Based on the measurements a combination of main shaft misalignment and planet carrier deflection has been identified. A purely numerical model has been developed and it shows good accordance with the experimental data.
A Note on the Shear Influence on Belt Drive Mechanics
2007
Abstract Belt drives work often with short center distances and very different wrap arcs so that high adherence characteristics are required at the belt-pulley contact. In addition, the belt flexural stiffness reduces the contact width, but this decrease may be compensated in part by the belt softening due to the shear compliance.
Electrical-optical characterization of multijunction solar cells under 2000X concentration
2014
In the framework of the FAE "Fotovoltaico ad Alta Efficienza" ("High Efficiency Photovoltaic") Research Project (PO FESR Sicilia 2007/2013 4.1.1.1), we have performed electrical and optical characterizations of commercial InGaP/InGaAs/Ge triple-junction solar cells (1 cm2) mounted on a prototype HCPV module, installed in Palermo (Italy). This system uses a reflective optics based on rectangular off-axis parabolic mirror with aperture 45×45 cm2 leading to a geometrical concentration ratio of 2025. In this study, we report the I-V curve measured under incident power of about 700 W/m2 resulting in an electrical power at maximum point (PMP) of 41.4 W. We also investigated the optical properties…
Simplified flexural response of steel-fiber reinforced concrete beams
2008
In the present paper, an analytical model is proposed that is able to determine the flexural response of supported beams under four-point bending tests. Cases of normal strength reinforced concrete beams with longitudinal bars in the presence of reinforcing hooked steel fibers and transverse stirrups are considered. A simplified analytical model is presented that is able to calculate the load-deflection curves and the maximum and ultimate deflections occurring in the case of shear or flexure failures. In the case of shear failure, the maximum shear strength of the beams is evaluated by using a recent analytical expression proposed by the author able to account for the shear-to-moment intera…