Search results for "FN"
showing 10 items of 862 documents
Mechanical Behaviour of a Green Sandwich Made of Flax Reinforced Polymer Facings and Cork Core
2015
Abstract This work investigates the flexural behavior of a composite sandwich made of flax fibers reinforced skin facings and an agglomerated cork core, to be employed as an eco-friendly solution for the making of structural components of small sailing boats. An experimental mechanical characterization of the strength and stiffness flexural behavior of the proposed sandwich is carried out, providing a comparison of performances from three implemented assembling techniques: hand-lay-up, vacuum bagging and resin infusion. Sandwich beams have been tested under three point bending (TPB) at various span lengths. A procedure is also proposed and implemented to consider the potential influence of …
Assessment of conduit artery vasomotion using photoplethysmography
2013
Vasomotion is a spontaneous oscillation of vascular tone. The phenomenon has been observed in small arterioles and capillaries as well as in the large conduit arteries. The layer of smooth muscle cells that surrounds a blood vessel can spontaneously and periodically change its tension and thereby the arterial wall stiffness also changes. As the understanding of the phenomenon is still rather obscure, researchers would benefit from a low-cost and reliable investigation technique such as photoplethysmography (PPG). PPG is an optical blood pulsation measurement technique that can offer substantial information about the arterial stiffness. The aims of this pilot study were to evaluate the usefu…
Formation of anodic films on sputtering-deposited Al–Hf alloys
2009
Abstract The growth of barrier-type anodic films at high efficiency on a range of sputtering-deposited Al–Hf alloys, containing from 1 to 95 at.% Hf, has been investigated in ammonium pentaborate electrolyte. The alloys encompassed nanocrystalline and amorphous structures, the latter being produced for alloys containing from 26 to 61 at.% Hf. Except at the highest hafnium content, the films were amorphous and contained units of HfO 2 and Al 2 O 3 distributed relatively uniformly through the film thickness. Boron species were confined to outer regions of the films. The boron distributions suggest that the cation transport number decreases progressively with increasing hafnium concentration i…
Structural Stability of Hafnia-Based Materials at Ultra-High Temperature
2018
This study assesses the structural stability at ultra-high temperature of the following selected compositions: 6.5 and 14 mol. % of RE2O3 (RE = Dy, Y, Er, Yb, and Lu) doped HfO2. Under thermal cycling and thermal shock, the structural stability was evaluated at 2400°C with water vapor flux using a specific test bench with a 3 kW CO2 laser. The cubic phase stability, which is theoretically important in the broad temperature range from 25 to 2800°C, was determined by a quantitative analysis of the X-ray diffractograms. Fully and partially stabilized HfO2, obtained respectively with 14 mol. % and 6.5 mol. % of dopants, showed different behaviors to thermal damage. Thermal expansion was measure…
23.1: Invited Paper: Models and Experiments of Mechanical Integrity for Flexible Displays
2008
Flexible displays present a challenging problem in terms of mechanical integrity, a result of the considerable hygro-thermo-mechanical contrast between the inorganic, brittle device layers and the compliant polymer substrates. This paper reviews the main approaches to study and identify the key factors, which control the mechanical stability of this class of displays. Focus is put on the analyses of residual stress and damage under tensile loading. Novel electro-mechanical methods are used for accurate insight into critical phenomena. An important result is that the thickness and stiffness of the substrate control the critical strain for failure of the device layers.
Deformation-Free Topography from Combined Scanning Force and Tunnelling Experiments
1993
We show that by measuring force and stiffness on a constant-current scanning tunnelling microscopy (STM) contour a deformation-free topography can be extracted. With reference to mono- and bicomponent self-assembled monolayers, we find that the characteristic depression pattern and the protrusions on a multicomponent film found in STM are to a great extent due to electronic effects.
Analytical modelling of force transmission in axially loaded RC columns with indirectly loaded jackets
2019
Abstract Concrete and steel jacketing are common strengthening techniques for reinforced concrete (RC) columns subjected to axial loads. In the most of cases the external jacket is made leaving gaps between the strengthening layer and the slabs, avoiding to carry directly a portion of the load. In this way, the external jacket induces a confinement pressure on the inner column, and its beneficial effect is due to the increase of strength and ductility. However, shear stresses develop on the interface between the column and consequently, the external jacket can be considered indirectly loaded. It sustains a portion of the axial load, which depends by the value of the axial shortening, relati…
On the flexural vibrations of sandwich plates
1995
A simplified approach to sandwich plate free vibrations, based on the superposition method, can provide approximations to the lowest modes for various boundary conditions, showing a characteristic influence of the bending-shear stiffness ratio.
Comparison of impact characteristics of four different ice hockey arena dasher boards
2012
During recent years the incidence of ice hockey related concussions has increased. Therefore, the main aim of this study was to determine how dasher board materials and structures affect impact characteristics and thereby concussion risk. The measurements were divided into two parts; 1. physiological characteristics of body checks were determined in real game measurements, and 2. simulation of body checks in the laboratory. Peak forces and stopping distances were determined from the high-speed camera data, and stiffness values were subsequently calculated. Dasher board materials and structures had a clear effect on impact characteristics. Flexible protective shielding material resulted in 1…
Study of the Formability of Light Metallic Materials
2015
There is a continuing interest in using laminated materials for the production of lightweight parts, the resulting parts having the same functionality and even an increased stiffness and length of operation compared to conventional materials. The present paper aims to study the forming behavior of the laminated materials that requires the unfolding of tests to determine the tensile mechanical properties and the intrinsic properties, determining the forming limit curves by means of the Nakajima test and the analysis of the behavior at unconventional incremental forming.