Search results for "FRCM"
showing 10 items of 34 documents
Experimental application of digital image correlation for the tensile characterization of basalt FRCM composites
2021
Abstract Composites made with inorganic matrix, namely fabric reinforced cementitious mortar (FRCM) composites are becoming widespread as strengthening materials for existing masonry structures. These composites are made of a dry grid of fibres embedded in an inorganic matrix. FRCMs can be considered a valid alternative to traditional organic composites such as fibre reinforced polymers (FRPs) because of their better compatibility with the masonry support. This work presents an experimental study for the tensile characterization of a basalt fabric reinforced cementitious mortar (BFRCM) composite. Tensile tests were carried out on coupons reinforced with one, two or three layers of grid to i…
Concrete columns confined with fibre reinforced cementitious mortars: Experimentation and modelling
2014
Abstract The structural behaviour of concrete columns strengthened with a system made up of fibre nets embedded in an inorganic stabilized cementitious matrix under an uniaxial load was investigated. Medium size specimens with circular and square cross-section were cast and subjected to monotonic uniaxial compression, to investigate the efficiency of a p-Phenylene BenzobisOxazole (PBO) Fibre Reinforced Cementitious Mortar (FRCM) system in increasing both strength and ductility. The experimental results show that the confinement system adopted produced a noticeable increment in strength and ductility, though the low mechanical ratios of fibre considered were not always able to ensure hardeni…
EFFICACY OF PBO-FRCM STRENGTHENING OF RC COLUMNS IN MRFS
2019
Innovative materials and techniques are widespread used for the strengthening and rehabilita-tion of existing structures. Recent researches have been developed on new fiber reinforced composites in which epoxy resin is replaced by inorganic cementitious material. These kind of cement-based composite material is known as Fiber Reinforced Cementitious Matrices (FRCM) recently used also in combination with synthetic polymeric fibers named PBO. The efficiency of this new confining system has been demonstrated by a large number of com-pression tests on concrete specimens while there are only few experimental researches on the behaviour of large scale specimens under external action able to simul…
Experimental investigation on the effect of mortar grade on the compressive behaviour of FRCM confined masonry columns
2018
Abstract The use of Fiber Reinforced Cementitious Mortar (FRCM) systems for structural retrofitting of masonry structures has become increasingly popular in the last years, due to the capability of this technique in overcoming some of the drawbacks related to the adoption of resin-based composites. Recent studies investigated on the effect of FRCM wraps on the compressive behaviour of concrete members and demonstrated as the application of mortar-based composites allows increasing the strength and, above all, the ductility of the column. The main difference with FRP confined columns is related to the different post-peak behaviour, characterized by a softening branch. Differently, few studie…
Masonry columns confined with fabric reinforced cementitious matrix (FRCM) systems: A round robin test
2021
Abstract The conservation and the preservation of existing masonry buildings, most of them recognized as cultural heritage, require retrofitting techniques that should reduce the invasiveness and assure reversibility and compatibility with the substrate. In this perspective, the strengthening system should be able to improve the bearing capacity of the structural member and, at the same time, to assure mechanical and material compatibility. The use of Fabric Reinforced Cementitious Matrix (FRCM) composites is now recognized to be suitable for these purposes. Indeed, the inorganic matrix has comparable properties with respect to the existing historical mortars while the fabric has relevant t…
Formulation of a truss element for modelling the tensile response of FRCM strips
2022
Modelling the tensile behaviour of Fabric Reinforced Cementitious Matrix (FRCM) is not a straightforward task due to the inner complexity of the mechanics of this kind of composite materials. In fact, after that the matrix is cracked, the compatibility between the fibre and the surrounding mortar is lost and the system behaves as two separate elements connected by a brittle interface. For this reason, several research studies proposed computational approaches for evaluating the tensile behaviour of FRCM composites, usually referring to brick-based 3D Finite Element Models (FEM) or to complex numerical procedures. This paper shows the formulation of a simplified coupled truss element for mod…
Constitutive Numerical Model of FRCM Strips Under Traction
2020
In this paper, the tensile behavior of Fiber Reinforced Cementitious Matrix (FRCM) strips is investigated through Finite Element (FE) models. The most adopted numerical modeling approaches for the simulation of the fiber-matrix interface law are described. Among them, the cohesive model is then used for the generation of FE models which are able to simulate the response under traction of FRCM strips tested in laboratory whose results are available in the technical literature. Tests on basalt, PBO and carbon coated FRCM specimens are taken into account also considering different mechanical ratios of the textile reinforcement. The comparison between FE results and experimental data allows val…
Effects of Different Test Setups on the Experimental Tensile Behaviour of Basalt Fibre Bidirectional Grids for FRCM Composites
2020
Fibre-reinforced cementitious matrix (FRCM) composites have been effectively used during the last ten years for the strengthening of existing concrete and masonry structures. These composite materials are made of medium- and high-strength fibre meshes embedded in inorganic matrices. Synthetic fibres are the ones that are currently the most used
Numerical Modeling Approaches of FRCMs/SRG Confined Masonry Columns
2019
The Fabric Reinforced Cementitious Matrices (FRCMs) and Steel Reinforced Grout (SRG) are a promising strengthening solution for existing masonry since inorganic matrix is considerably compatible with historical substrates. The present paper is focused on a Finite Element (FE) analysis of masonry columns confined with FRCM composites developed by Abaqus-code. The masonry columns were modelled using a macro model approach. The model was performed by using the following functions Concrete Damage Plasticity (CDP) and the Plastic (P) in order to describe the constitutive laws of material for masonry columns and external reinforcement, respectively. Typical failures of FRCM-systems are slippage o…
ELEMENTI IN CALCESTRUZZO CONFINATI CON FRCM ANALISI SPERIMENTALE PER CARICHI MONOTONICI
2011
Vengono presentati i risultati di prove sperimentali su provini di calcestruzzo rinforzati con fibre di materiale composito, soggetti a compressione monotonica fino alla rottura. In particolare si è sperimentato l’impiego degli FRCM (Fiber Reinforced Cementitiuos Matrix), in cui le fibre di rinforzo sono immerse in una matrice cementizia. I risultati ottenuti dimostrano che il confinamento eseguito con questi materiali conferisce agli elementi di calcestruzzo un significativo aumento di capacità portante e di duttilità, sebbene le percentuali di fibra impiegate non abbiano consentito di ottenere comportamenti costantemente incrudenti fino a rottura. In particolare le curve tensione-deformaz…