Search results for "Faces"

showing 10 items of 3167 documents

Thermodynamic Study of Small Hydrophobic Ions at the Water–Lipid Interface

2001

Abstract The thermodynamics of binding of two small hydrophobic ions such as norharman and tryptophan to neutral and negatively charged small unilamellar vesicles was investigated at pH 7.4 using fluorescence spectroscopy. Vesicles were formed at room temperature from dimyristoyl phosphatidylcholine (DMPC) or DMPC/dimyristoylphosphatidic acid and DMPC/dimyristoylphosphatidylglycerol. The changes in fluorescence properties were used to obtain association isotherms at variable membrane surface negative charge and at different ionic strengths. The binding of both ions was found to be quantitatively enhanced as the percentage of negative phospholipid increases in the membrane. Also, a decrease …

Analytical chemistryPhospholipidPhosphatidic AcidsIonic bondingBiomaterialschemistry.chemical_compoundColloid and Surface ChemistryIon bindingElectrochemistryLipid bilayerUnilamellar LiposomesIonsChromatographyVesicleTryptophanBinding constantSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsPartition coefficientHarminechemistryPartition equilibriumThermodynamicslipids (amino acids peptides and proteins)DimyristoylphosphatidylcholineHydrophobic and Hydrophilic InteractionsCarbolinesJournal of Colloid and Interface Science
researchProduct

Graphene and ionic liquids new gel paste electrodes for caffeic acid quantification

2015

Abstract Graphene/ionic liquids nanocomposite gels were synthesized by an electrochemical etching approach and fully characterized under a morphological and structural point of view. For this purpose, several analytical techniques were applied, as HR-TEM/EDX (High Resolution-Transmission Electron Microscopy/Energy Dispersive X-Ray Analysis); FE-SEM/EDX (Field Emission-Scanning Electron Microscopy/Energy Dispersive X-Ray Analysis); XPS (X-Ray Photoelectron Spectroscopy); FT-IR (Fourier Transform-Infrared Spectroscopy) and electrochemical techniques. After the characterization study, nanocomposite-gel paste electrodes were assembled, exhibiting a selective and specific detection toward the ca…

Analytical chemistrySurfaces Coatings and FilmAnti-oxidant agentsCondensed Matter PhysicAnti-oxidant agentIonic liquidElectrochemistrylaw.inventionNanocompositeschemistry.chemical_compoundX-ray photoelectron spectroscopylawgraphene Ionic liquids; nanocomposites; electrochemistry; caffeic acid; anti-oxidant agentsMaterials ChemistryElectrochemistryMoleculeElectrical and Electronic EngineeringInstrumentationSettore CHIM/02 - Chimica FisicaMaterials Chemistry2506 Metals and AlloySettore CHIM/03 - Chimica Generale e InorganicaDetection limitCaffeic acidNanocompositeNanocompositeGrapheneElectronic Optical and Magnetic MaterialMetals and AlloysCondensed Matter Physicsgraphene Ionic liquidsSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsIonic liquidschemistryChemical engineeringIonic liquidElectrode2506Graphene
researchProduct

Application of a Novel Refinement Method for Accurate Determination of Chemical Diffusion Coefficients in Electroactive Materials by Potential Step T…

2005

We describe application of a novel refinement method for an accurate determination of the chemical diffusion coefficient, D, and the generalized kinetic parameter, A, from experimental potentiostatic intermittent titration technique (PITT) data suited for a variety of electrochemically doped electroactive polymers and inorganic intercalation host materials. The proposed, simple, two-step refinement procedure, based on earlier derived analytical expressions for the PITT response, is exemplified by the analysis of chronoamperometric responses to small-amplitude potential perturbation for p- and n-doped poly(fluorenone-bithiophene) (PFDOBT-HH) thin film electrode. The initial p-doping and the …

Analytical chemistryThermodynamics02 engineering and technology010402 general chemistryKinetic energy01 natural sciencesSolution of Schrödinger equation for a step potential[CHIM.ANAL]Chemical Sciences/Analytical chemistryMaterials ChemistryElectrochemistryElectroactive polymers[CHIM]Chemical SciencesDiffusion (business)Ohmic contactComputingMilieux_MISCELLANEOUSchemistry.chemical_classificationRenewable Energy Sustainability and the EnvironmentTime constantPolymer021001 nanoscience & nanotechnologyCondensed Matter Physics0104 chemical sciencesSurfaces Coatings and FilmsElectronic Optical and Magnetic Materials[CHIM.POLY]Chemical Sciences/PolymerschemistryElectrode0210 nano-technology
researchProduct

New n-type molecular semiconductor–doped insulator (MSDI) heterojunctions combining a triphenodioxazine (TPDO) and the lutetium bisphthalocyanine (Lu…

2018

International audience; Molecular semiconductor–doped insulator (MSDI) heterojunctions were designed using a new family of sublayers, namely triphenodioxazines (TPDO). The device obtained by combining the tetracyano triphenodioxazine bearing two triisopropylsilylethynyl moieties as a sublayer with the lutetium bisphthalocyanine (LuPc2) as a top layer showed a nonlinear current–voltage characteristic independent of the sign of the polarization, which is the signature of MSDI heterojunctions. Thus, a TPDO was used in a chemical sensor for the first time. Despite LuPc2 being the only material exposed to the atmosphere, the positive response of the device under ammonia revealed the key role pla…

Analytical chemistrychemistry.chemical_element02 engineering and technology010402 general chemistryConductometric transducer01 natural sciencesAmmoniachemistry.chemical_compoundMolecular semiconductorAmmonia[CHIM.ANAL]Chemical Sciences/Analytical chemistryMaterials ChemistryTriphenodioxazineElectrical and Electronic EngineeringMolecular materialsInstrumentationChemistrybusiness.industryDopingMetals and AlloysHeterojunction021001 nanoscience & nanotechnologyCondensed Matter PhysicsLutetiumChemical sensor0104 chemical sciencesSurfaces Coatings and FilmsElectronic Optical and Magnetic Materials[SPI.TRON]Engineering Sciences [physics]/ElectronicsMolecular materialsPositive responseHeterojunctionsOptoelectronics0210 nano-technologybusiness
researchProduct

Defektanalyse von a-C- und CNx-Schichten mittels Röntgen-Photoemissions-Elektronenmikroskopie (X-PEEM)Characterization of stoichiometric defects in d…

2001

Amorphe Kohlenstoff- und Kohlenstoffnitridschichten werden vielseitig als Schutzschichten in der Industrie verwandt. Insbesondere werden in der Magnetfestplattenspeicherindustrie verschleisfeste sauerstoffundurchlassige Schutzschichten von wenigen Nanometern Dicke benotigt. Rontgen-Photoemissions-Elektronenmikroskopie (X-PEEM) stellt eine Analysetechnik zur Charakterisierung u.a. von Kohlenstoffschutzschichten dar, da sich Informationen uber die lokale Bindungsumgebung aus der Rontgenabsorptions-Nahkantenstruktur (XANES) gewinnen lassen. CVD-DLC- sowie a-C- und CNx-Schichten wurden analysiert. Fur die a-C-Schichten auf Si (100) wurde der Anteil sp2-hybridisierter Atome bestimmt und mit den …

Analytical chemistrychemistry.chemical_elementDiamondengineering.materialCondensed Matter PhysicsXANESSurfaces Coatings and FilmsCharacterization (materials science)chemistry.chemical_compoundPhotoemission electron microscopychemistryengineeringThin filmCarbon nitrideCarbonStoichiometryVakuum in Forschung und Praxis
researchProduct

Reactive direct current magnetron sputtered TiO2 thin films with amorphous to crystalline structures.

2008

International audience; TiO2 thin films were deposited on soda–lime glass substrates by reactive direct current magnetron sputtering in a mixture of pure argon and oxygen. The influence of both the deposition time, td, and the post-annealing treatments on the films morphology, composition and structure was analyzed by scanning electron microscopy, ellipsometry, X-ray photoelectrons spectroscopy, X-ray diffraction (XRD) and Raman spectroscopy. Amorphous TiO2 was obtained for the shortest deposition time, td=15 min. Increasing td up to 30 min, poorly crystallized anatase and rutile phases were formed together with amorphous TiO2, as was revealed by complementary XRD patterns and Raman spectra…

AnataseMaterials scienceAnalytical chemistry02 engineering and technology01 natural scienceschemistry.chemical_compoundsymbols.namesakeEllipsometry0103 physical sciencesMaterials ChemistryThin filmMicrostructure010302 applied physicsMetals and AlloysSurfaces and Interfaces021001 nanoscience & nanotechnologySurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsAmorphous solidX-ray diffractionCarbon filmchemistryPhysical vapor depositionTitanium dioxideRaman spectroscopysymbolsTitanium dioxide0210 nano-technologyRaman spectroscopyDC magnetron sputtering
researchProduct

Study of surface layers and ejected powder formed by oxidation of titanium substrates with a pulsed Nd:YAG laser beam.

2009

Laser treatment of a titanium surface at certain conditions initiates the formation of titanium oxide layers as well as micro (nano) scale powder ejected from the surface of the substrate. The resultant morphology of the surface as well as the size and the structure of the particles are all strongly dependent on the treatment parameters (laser fluence, pulse frequency, overlap parameter, etc.). In this study, titanium substrates were treated with an industrial pulsed Nd:YAG laser in air, with varying parameters. Surface layers and ejected materials were compared using scanning and transmission electron microscopy, X-ray diffraction and Raman spectroscopy. The rutile phase of TiO(2) dominate…

AnataseMaterials scienceAnalytical chemistryGeneral Physics and Astronomychemistry.chemical_element02 engineering and technology01 natural scienceslaw.inventionchemistry.chemical_compoundsymbols.namesakePlasmalaw0103 physical sciencesLaser treatments010302 applied physicstechnology industry and agricultureSurfaces and InterfacesGeneral Chemistry021001 nanoscience & nanotechnologyCondensed Matter PhysicsLaserSurfaces Coatings and FilmsTitanium oxidechemistryRutileNd:YAG laserTitanium dioxidesymbolsTitanium dioxideNanoparticles0210 nano-technologyRaman spectroscopyTitanium
researchProduct

Pulsed laser growth and characterization of thin films on titanium substrates

2007

Abstract Colored layers were obtained by laser surface treatment of Ti substrates with a pulsed Nd:YAG Q-switched laser. The changes in the morphology, structure and chemical composition of the layers were studied by SEM, EDS, XPS, SIMS and Raman spectroscopy as a function of the laser fluence in the 4–60 J cm −2 . For laser fluences lower than 25 J cm −2 , the layers are colorless or yellow. Their surface is smooth, but they display cracks which increase when the fluence increases. The O/Ti ratio, determined by XPS analysis, varies from 0.7 (colorless layers) to 1.3 (yellow layer). Moreover, XPS spectra evidence non-negligible amounts of nitrogen and carbon in these layers. Raman spectra s…

AnataseMaterials scienceAnalytical chemistryGeneral Physics and Astronomychemistry.chemical_elementSurfaces and InterfacesGeneral ChemistryCondensed Matter PhysicsLaserFluenceSurfaces Coatings and Filmslaw.inventionsymbols.namesakeX-ray photoelectron spectroscopychemistrylawRutilesymbolsThin filmRaman spectroscopyTitaniumApplied Surface Science
researchProduct

Highly Active Photocatalytic TiO2 Powders Obtained by Thermohydrolysis of TiCl4 in Water

2009

Highly active photocatalytic TiO2 samples were synthesized by thermohydrolysis of TiCl4 in water at 100 °C. Rutile, binary mixtures of anatase and rutile or anatase and brookite or ternary mixtures of anatase, brookite, and rutile were obtained depending on the TiCl4/H2O ratio. Rietveld refinements were employed to evaluate the crystalline phases and composition of the mixtures. The effect of the aging time on the phase composition was also studied. The band gap values of the samples were obtained by the diffuse reflectance spectra. The position of the flat band potentials of anatase, brookite, and rutile was determined measuring the photovoltage as a function of the suspension pH. From the…

AnataseMaterials scienceBand gapBrookitebusiness.industryAnalytical chemistryMineralogySurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsGeneral EnergySemiconductorRutilevisual_artPhotocatalysisvisual_art.visual_art_mediumPhysical and Theoretical ChemistryPhotodegradationTernary operationbusinessThe Journal of Physical Chemistry C
researchProduct

Optical and Acoustic Vibrations Confined in Anatase TiO2 Nanoparticles under High-Pressure

2014

International audience; The effect of an applied high pressure on the optical and acoustic vibrations of small anatase TiO2 nanoparticles is studied using Raman scattering. All the Raman peaks show a significant variation of their frequency with pressure, except for the low-frequency peak which is due to acoustic vibrations confined in the nanoparticles. These variations (or lack thereof) are compared to first-principles calculations of the stiffness tensor and phonons of bulk anatase TiO2 as a function of pressure. In particular, the variation of the shape of the low-frequency peak is explained by the increase of the elastic anisotropy of anatase TiO2 as pressure is increased.

AnataseMaterials scienceCondensed matter physicsPhononbusiness.industry[ PHYS.COND.CM-MS ] Physics [physics]/Condensed Matter [cond-mat]/Materials Science [cond-mat.mtrl-sci]Physics::OpticsNanoparticleSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsVibrationsymbols.namesakeCondensed Matter::Materials ScienceGeneral EnergyOpticsHigh pressurePhysics::Atomic and Molecular Clusterssymbols[PHYS.COND.CM-MS]Physics [physics]/Condensed Matter [cond-mat]/Materials Science [cond-mat.mtrl-sci]Physical and Theoretical ChemistrybusinessRaman spectroscopyRaman scatteringStiffness matrix
researchProduct