Search results for "Ferro"
showing 10 items of 2451 documents
SrTiO3and Pr Effects on Structural, Dielectric and Ferroelectric Properties of Na0.5Bi0.5TiO3Ceramic
2015
[(Na0.5Bi0.5TiO3)0.7Sr0.3]1-xPrxTiO3(NBTS30P) (0 ≤ x ≤ 0.025) ceramics were prepared by solid-state synthesis process. Their crystal structure, microstructure dielectric and ferroelectric properties were studied. XRD data show that all of the ceramics possess a single perovskite phase. SEM results confirm that the ceramics are well sintered and exhibit relative densities higher than 97%. The results also reveal that the microstructure of the different compositions do not show a significant variation. The praseodymium (Pr) substitution to NBTS30 results in a change of crystal structure from cubic to tetragonal at x = 0.025. At the same time, electric permittivity decreases, the maximum is br…
Structure and dielectric properties of Na<inf>1/2</inf>Bi<inf>1/2</inf>TiO<inf>3</inf>-BaTiO<inf>3</inf&…
2012
Dielectric properties, polarization and x-ray diffraction are studied for (1−x)Na 1/2 Bi 1/2 TiO 3 -xBaTiO 3 solid solutions in a concentration range above the morphotropic phase boundary. It is showed that all the studied compositions have tetragonal structure with maximal tetragonality slightly above the morphotropic phase boundary. Ferroelectric relaxor behavior is observed in a wide concentration range of BaTiO 3 . Stability of the relaxor state decreases with increasing BaTiO 3 concentration, but only for compositions with low Na 1/2 Bi 1/2 TiO 3 content the normal ferroelectric-paraelectric phase transition, which is characteristic to pure BaTiO 3 , occurs. Mechanisms, which influence…
INFLUENCE OF ZIRCONIUM ON STRUCTURAL, MICROSTRUCTURAL AND FERROELECTRIC PROPERTIES OF BaZr0.20Ti0.80O3 CERAMIC
2009
ABSTRACT Barium zirconium titanate BaZrxTi1-xO3 ceramics have been obtained by conventional method. The X-ray diffraction analysis showed that the BaZr0.20Ti0.80O3 crystallizes in the cubic structure. The lattice parameter a increases with temperature, at temperature ∼308 K a small deviation is observed. The performed EDS study revealed that the samples were perfectly sintered and that the material was chemically homogeneous. It contains a little glassy phase and the grains are well shaped. The zirconium content (20 mol%) in the examined solid solution caused downward shift of the temperature T m . The increase of the achieved permittivity values ϵm was observed as well.
Proton glass behavior and hopping conductivity in solid solutions of antiferroelectric betaine phosphate and ferroelectric betaine phosphite.
1991
Measurements of the dielectric permittivity are reported for solid solutions of antiferroelectric betaine phosphate and ferroelectric betaine phosphite at frequencies 10 −2 Hz T c the dielectric response is dominated by ac and dc conduction. The 40% sample exhibits pure relational behavior indicative of a transition into an orientational glass state
Functional Magnetic Mesoporous Silica Microparticles Capped with an Azo-Derivative: A Promising Colon Drug Delivery Device
2018
[EN] Magnetic micro-sized mesoporous silica particles were used for the preparation of a gated material able to release an entrapped cargo in the presence of an azo-reducing agent and, to some extent, at acidic pH. The magnetic mesoporous microparticles were loaded with safranin O and the external surface was functionalized with an azo derivative 1 (bearing a carbamate linkage) yielding solid S1. Aqueous suspensions of S1 at pH 7.4 showed negligible safranin O release due to the presence of the bulky azo derivative attached onto the external surface of the inorganic scaffold. However, in the presence of sodium dithionite (azoreductive agent), a remarkable safranin O delivery was observed. A…
Comparative enantioseparation of planar chiral ferrocenes on polysaccharide‐based chiral stationary phases
2022
Planar chiral ferrocenes are well-known compounds that have attracted interest for application in synthesis, catalysis, material science, and medicinal chemistry for several decades. In spite of the fact that asymmetric synthesis procedures for obtaining enantiomerically enriched ferrocenes are available, sometimes, the accessible enantiomeric excess of the chiral products is unsatisfactory. In such cases and for resolution of racemic planar chiral ferrocenes, enantioselective high-performance liquid chromatography (HPLC) on polysaccharide-based chiral stationary phases (CSPs) has been used in quite a few literature articles. However, although moderate/high enantioselectivities have been ob…
Dielectric Properties of PbSc1/2Nb1/2O3-PbTiO3Ceramics
2004
Lead titanate solid solutions exhibits extreme values of some physical parameters. We have investigated a ferroelectric relaxor ceramics of PSN-PT composition near the morphotropic phase boundary. Results are discussed with account for the relaxor properties related to defects and disordering of the PSN-PT system.
Low and Infra-Low Frequency Measurements in Lead Titanate Solid Solutions
2006
The study of PSN-PT ferroelectric relaxor ceramics exhibiting extreme values of some physical parameters near the morphotropic phase boundary is reported. The results are discussed to account for the relaxor properties related to defects and disordering of the PSN-PT system.
Effects of structure ordering, structure defects and external conditions on properties of complex ferroelectric perovskites
1998
Abstract Structural rearrangements in lead-containing (A‘A’) (B’B“)O3 type perovskite compounds are caused by technological treatment, high-energy radiation and ambient conditions. Variation of structure ordering along with modification (substituted or defected solid solutions) may provide promising compositions for applications, e.g., cascade microcryogenic devices (PST solid solutions); efficient piezoelectric materials – here the new (1 – x)Pb(Lu1/2Nb1/2)O3 – xPbTiO3 system in the morphotropic region. The maximum values of the electromechanical coupling coefficients kp = 0·663, kt = 0·481, k 31 = 0·355 were attained in compositions PLuNT 59/41 (Tm = 353°C) near the morphotropic phase bou…
Ceramics and Thin Films of Some New Pb(B 3+ ,Nb)TiO 3 -PbTiO 3 Systems
2003
The structure, dielectric, and electromechanical properties of (1 m x )Pb(B 3+ ,Nb)TiO 3 - x PbTiO 3 binary systems (B = Lu, Er, Tb, Ho) are reported. The crystallographic features at the morphotropic phase boundary (MPB) between tetragonal P4mm and pseudo-monoclinic M phases are discussed with respect to electro-mechanical properties. Doping effect (with La 3+ ) on the properties of ceramic samples of pseudobinary Pb(Lu 1/2 Nb 1/2 )O 3 -PbTiO 3 (PLuNT) system has been investigated. Pb(Mg 1/3 Nb 2/3 )-PbTiO 3 (PT) solid solutions were studied under different processing conditions for obtaining ceramics of 100% perovskite structure with sufficient high j T EC ∼ 1 K near room temperature. The…