Search results for "Ferro"

showing 10 items of 2451 documents

Field effect in the viscosity of magnetic colloids studied by multi-particle collision dynamics

2019

Abstract Colloidal solutions of magnetic nanoparticles are usually employed when the fluidity and magnetic properties are required at the same time, either in technical or biomedical applications. However, when the magnetic size of the nanoparticles is large enough (>12–15 nm) the colloid may form an equilibrium structure with or without the external magnetic field, which can significantly influence its rheology. Using multi-particle collision dynamics we study the internal structure and viscosity of the magnetic colloids at varying magnitudes of the externally applied field. We show a generalized structural behavior across all studied regimes and an appreciable increase of flow resistance …

010302 applied physicsFerrofluidMaterials scienceField (physics)Field effect02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesElectronic Optical and Magnetic MaterialsMagnetic fieldCondensed Matter::Soft Condensed MatterViscosityRheologyChemical physics0103 physical sciencesMagnetic nanoparticlesMulti-particle collision dynamics0210 nano-technologyJournal of Magnetism and Magnetic Materials
researchProduct

Tuning of interfacial perpendicular magnetic anisotropy and domain structures in magnetic thin film multilayers

2019

We investigate the magnetic domain structures and the perpendicular magnetic anisotropy (PMA) arising in CoFeB films interfaced with selected heavy metal (HM) layers with large spin Hall angles in HM/CoFeB/MgO (HM = W, Pt, Pd, W x Ta1−x ) stacks as a function of CoFeB thickness and composition for both as-deposited and annealed materials stacks. The coercivity and the anisotropy fields of annealed material stacks are higher than for the as-deposited stacks due to crystallisation of the ferromagnetic layer. Generally a critical thickness of MgO > 1 nm provides adequate oxide formation at the top interface as a requirement for the generation of PMA. We demonstrate that in stacks with Pt as th…

010302 applied physicsMaterials scienceAcoustics and UltrasonicsCondensed matter physicsMagnetic domainAnnealing (metallurgy)02 engineering and technologyCoercivity021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesSurfaces Coatings and FilmsElectronic Optical and Magnetic MaterialsTransition metalFerromagnetismHall effect0103 physical sciencesThin film0210 nano-technologyAnisotropyJournal of Physics D: Applied Physics
researchProduct

The challenge in realizing an exchange coupled BiFeO3-double perovskite bilayer

2020

Abstract In this work we propose a device design for efficient voltage control of magnetism. The magnetization of a ferrimagnetic double perovskite may be manipulated by an exchange coupled layer of multiferroic BiFeO3. Bilayers of Barium doped BiFeO3 and ferrimagnetic double perovskite Sr2FeMoO6 have been prepared by pulsed laser deposition motivated by the possibility of strong interlayer exchange coupling. While single layers of each material show high quality we observe that in both stacking orders the first layer decomposes during the deposition of the second layer. The reason for the decomposition are strongly differing growth conditions for BiFeO3 and Sr2FeMoO6. This means that the g…

010302 applied physicsMaterials scienceBilayer02 engineering and technology021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesElectronic Optical and Magnetic MaterialsPulsed laser depositionMagnetizationExchange biasFerrimagnetismChemical physics0103 physical sciencesMultiferroics0210 nano-technologyLayer (electronics)Perovskite (structure)Journal of Magnetism and Magnetic Materials
researchProduct

Electronic structure and magnetic order in Cu Zn(1−)O: A study GGA and GGA + U

2019

Abstract Based on density functional theory within GGA formalism, first-principles calculations were performed in order to study the structural, electronic, and magnetic properties of Cu-doped ZnO compound with dopant concentrations x = 0.028, 0.042, 0.056, and 0.125. It was found that CuxZn(1−x)O is ferromagnetic for both the closest and farthest impurity distances, but it is more stable energetically for the closest one. For all concentrations we obtained nearly half − metallic behavior. The calculations show that two substitutional Cu atoms introduce a magnetic moment of about 2.0 μB for all dopant concentrations. The results indicate that the magnetic ground state originates from the st…

010302 applied physicsMaterials scienceCondensed matter physicsDopantMagnetic momentSpins02 engineering and technologyElectronic structure021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesElectronic Optical and Magnetic MaterialsCondensed Matter::Materials ScienceFerromagnetismImpurity0103 physical sciencesCondensed Matter::Strongly Correlated ElectronsDensity functional theoryElectrical and Electronic Engineering0210 nano-technologyGround statePhysica B: Condensed Matter
researchProduct

Quasi-antiferromagnetic multilayer stacks with 90 degree coupling mediated by thin Fe oxide spacers

2019

We fabricated quasiantiferromagnetic (quasi-AFM) layers with alternating antiparallel magnetization in the neighboring domains via 90° magnetic coupling through an Fe-O layer. We investigated the magnetic properties and the relationship between the magnetic domain size and the 90° magnetic coupling via experiments and calculations. Two types of samples with a Ru buffer and a (Ni80Fe20)Cr40 buffer were prepared, and we found that with the NiFeCr buffer, the sample has a flatter Fe-O layer, leading to stronger 90° magnetic coupling and a smaller domain size compared with the Ru buffer sample. This trend is well explained by the bilinear and biquadratic coupling coefficients, A12 and B12, in L…

010302 applied physicsMaterials scienceCondensed matter physicsMagnetic domainAtomic force microscopy530 PhysicsOxideGeneral Physics and Astronomy02 engineering and technology021001 nanoscience & nanotechnology530 Physik01 natural sciencesInductive couplingBuffer (optical fiber)Magnetizationchemistry.chemical_compoundchemistry0103 physical sciencesAntiferromagnetism0210 nano-technologyAntiparallel (electronics)
researchProduct

Impact of Annealing Temperature on Tunneling Magnetoresistance Multilayer Stacks

2020

The effect of annealing temperatures on the tunnel magnetoresistance (TMR) of MgO-based magnetic tunnel junctions (MTJs) has been investigated for annealing between 190 and 370°C. The TMR shows a maximum value of 215% at an annealing temperature of 330°C. A strong sensitivity of the TMR and the exchange bias of the pinned ferromagnetic layers on the annealing temperature are observed. Depending on sensor application requirements, the MTJ can be optimized either for stability and pinning strength or for a high TMR signal by choosing the appropriate annealing temperature. The switching mechanism of the ferromagnetic layers in the MTJ and the influence of the annealing on the layer properties,…

010302 applied physicsMaterials scienceCondensed matter physicsMagnetoresistanceAnnealing (metallurgy)02 engineering and technologyCondensed Matter::Mesoscopic Systems and Quantum Hall Effect021001 nanoscience & nanotechnology01 natural sciencesElectronic Optical and Magnetic MaterialsCondensed Matter::Materials ScienceTunnel magnetoresistanceExchange biasFerromagnetismCondensed Matter::Superconductivity0103 physical sciences0210 nano-technologyQuantum tunnellingIEEE Magnetics Letters
researchProduct

Modification of magnetic anisotropy in Ni thin films by poling of (011) PMN-PT piezosubstrates

2016

ABSTRACTThis study reports the magnetic and magnetotransport properties of 20 nm thick polycrystalline Ni films deposited by magnetron sputtering on unpoled piezoelectric (011) [PbMg1/3Nb2/3O3]0.68-[PbTiO3]0.32 (PMN-PT) substrates. The magnetoresistance (MR), as well as the magnetization reversal, is found to depend on the polarization state of the piezosubstrate. Upon poling the PMN-PT substrate, which results in a transfer of strain to the Ni film, the MR value decreases by a factor of 12 at room temperature and a factor of 21 at 50 K for the current direction along the PMN-PT [100] direction, and slightly increases for the [01] current direction. Simultaneously, a strong increase in the …

010302 applied physicsMaterials scienceCondensed matter physicsMagnetoresistancePoling02 engineering and technologySubstrate (electronics)Sputter depositionCoercivity021001 nanoscience & nanotechnologyCondensed Matter Physics01 natural sciencesElectronic Optical and Magnetic MaterialsMagnetic anisotropyNuclear magnetic resonanceArtificial multiferroicsthin films0103 physical sciencesmagnetoelectric couplingddc:530CrystalliteThin film0210 nano-technology
researchProduct

Tetragonal Heusler Compounds for Spintronics

2013

With respect to the requirements of spin torque transfer (STT) materials, one the most promising materials families are the tunable tetragonal Heusler compounds based on Mn2YZ (Y=Co,Fe,Ni,Rh,...; Z=Al, Ga, Sn). They form the inverse cubic Heusler structure with three distinct magnetic sublattices, which allows a fine tuning of the magnetic properties. Starting with the stoichiometric Mn3Ga compound, we explored the complete phase diagram of Mn3-xYxZ (Y=Co, Fe, Ni and Z=Ga ). All series exhibit thermally stable magnetic properties. As we demonstrate, Mn3-xFexGa series, which are tetragonal over the whole range of compositions, are good as hard magnets, whereas magnetically more weak Mn3-xNix…

010302 applied physicsMaterials scienceCondensed matter physicsSpintronicsSpin-transfer torque02 engineering and technologyCrystal structure021001 nanoscience & nanotechnology01 natural sciencesElectronic Optical and Magnetic MaterialsTetragonal crystal systemFerromagnetismMagnet0103 physical sciencesElectrical and Electronic Engineering0210 nano-technologyStoichiometryPhase diagramIEEE Transactions on Magnetics
researchProduct

Isothermal relaxation of discommensurations in K2ZnCl4

1994

At the incommensurate-ferroelectric transition temperature T c of K 2 ZnCl 4 , the dielectric susceptibility contains an anomalous contribution both above and below T c . Previous quasi-static dielectric measurements and hysteresis loops demonstrated that this anomalous part arises from the peculiar dynamics of discommensurations. We have used isothermal dielectric measurements to get some insight into the long time dynamics of these discommensurations. We have found that the characteristic relaxation times τ are of the order of 10 4 s in the incommensurate and in the ferroelectric phase. Even more unusual is a non-monotonous relaxation which is observed in a restricted temperature range ab…

010302 applied physicsMaterials scienceCondensed matter physicsTransition temperatureGeneral EngineeringStatistical and Nonlinear PhysicsDielectricAtmospheric temperature range01 natural sciencesFerroelectricityIsothermal processHysteresisCondensed Matter::Materials SciencePhase (matter)[PHYS.HIST]Physics [physics]/Physics archives0103 physical sciencesRelaxation (physics)010306 general physics
researchProduct

SrTiO3-doping effect on dielectric and ferroelectric behavior of Na0.5Bi0.5 TiO3 ceramics

2018

Lead-free (Na0.5Bi0.5)1-xSrxTiO3 ceramics (x = 0–0.04) were synthesized by a conventional mixed-oxide technique. The microstructure study showed a dense structure, in good agreement with that of ab...

010302 applied physicsMaterials scienceDoping02 engineering and technologyDielectric021001 nanoscience & nanotechnologyCondensed Matter PhysicsMicrostructure01 natural sciencesFerroelectricityElectronic Optical and Magnetic Materialsvisual_art0103 physical sciencesvisual_art.visual_art_mediumCeramicComposite material0210 nano-technologyFerroelectrics
researchProduct