Search results for "Fiber optic"
showing 10 items of 193 documents
Overview of radiation induced point defects in silica-based optical fibers
2019
International audience; Silica-based optical fibers, fiber-based devices and optical fiber sensors are today integrated in a variety of harsh environments associated with radiation constraints. Under irradiation, the macroscopic properties of the optical fibers are modified through three main basic mechanisms: the radiation induced attenuation, the radiation induced emission and the radiation induced refractive index change. Depending on the fiber profile of use, these phenomena differently contribute to the degradation of the fiber performances and then have to be either mitigated for radiation tolerant systems or exploited to design radiation detectors and dosimeters. Considering the stro…
Etched LPFGs in reflective configuration for sensitivity and attenuation band depth increase
2016
A reflection configuration setup for long-period fiber gratings is presented. It permits to obtain a unique band with attenuation double than that obtained in transmission configuration, which is interesting for applications where this value is reduced (e.g., the mode transition phenomenon). The method is based on the deposition of a silver mirror at the end of the optical fiber, which permits to absorb the power transmitted through cladding modes and to avoid the generation of interferometric bands. The method also solves the requirement of a precise cleave or to polish the end of the grating, a drawback present in other publications. The versatility of the setup has been proved by applica…
Time-domain fiber laser hydrogen sensor.
2004
We report a novel scheme for a fiber-optic hydrogen sensor based on an erbium-doped fiber laser with a palladium-coated tapered fiber within the laser cavity. The tapered fiber acts as a hydrogen-sensing element. When the sensing element is exposed to a hydrogen atmosphere, its attenuation decreases, changing the cavity losses and leading to a modification of the laser transient. The hydrogen concentration is obtained by simple measurement of the buildup time of the laser. This technique translates the measurement of hydrogen concentration into the time domain, and it can be extended to many intensity-based fiber sensors. Relative variations in the buildup time of up to 55% at an increase o…
Fiber Characterization Using Whispering Gallery Modes(Invited)
2019
Fiber whispering gallery modes (WGMs) are surface waves that propagate azimuthally along the outer surface of the fiber cladding. Those waves that are in phase every turn give rise to narrow resonances defined by the resonant wavelength and a high Q factor. The actual values of the resonant wavelengths depend on the radius and the refractive index of the fiber cladding, enabling the development of several fiber characterization techniques. In addition, the typical high Q factor of these resonances (Q > 106) provides the characterization techniques with a low detection limit. Here, we report the development of a technique for measuring temperature profiles along the optical fiber, which enab…
Intensity-Modulated Optical Fiber Sensor for AC Magnetic Field Detection
2015
An erbium-doped (Er3+) fiber optic laser is proposed for sensing alternated magnetic fields by measuring the laser intensity modulation. The sensor is fabricated using two partially overlapped narrow-band fiber Bragg gratings (FBGs) and a section of doped fiber in a Fabry–Perot configuration. Laser power stability and bandwidth are studied while changing the overlap. A bulk rod of TbDyFe, a magnetostrictive material, is glued to both the FBGs and the laser wavelength and power are modulated according to the magnetic field. Acquisition and processing are done using virtual instrumentation. Results have shown the possibility of detecting 11.18 $\mu \text{T}_{\mathrm {{rms}}}/\surd $ Hz for an…
Fiber-pigtailed temperature sensors based on dielectric-loaded plasmonic waveguide-ring resonators.
2012
We demonstrate optical fiber-pigtailed temperature sensors based on dielectric-loaded surface plasmon-polariton waveguide-ring resonators (DLSPP-WRRs), whose transmission depends on the ambient temperature. The DLSPP-WRR-based temperature sensors represent polymer ridge waveguides (~1×1 µm(2) in cross section) forming 5-µm-radius rings coupled to straight waveguides fabricated by UV-lithography on a 50-nm-thick gold layer atop a 2.3-µm-thick CYTOP layer covering a Si wafer. A broadband light source is used to characterize the DLSPP-WRR wavelength-dependent transmission in the range of 1480-1600 nm and to select the DLSPP-WRR component for temperature sensing. In- and out-coupling single-mod…
Experimental analysis of distributed pump absorption and refractive index changes in Yb-doped fibers using acousto-optic interaction.
2015
In-fiber acousto-optic interaction is used to characterize the refractive index changes at the C band in a single-mode ytterbium-doped optical fiber under 980 nm pumping. The transmission notch created by the acoustic-induced coupling between the core mode and a cladding mode shifts to longer wavelengths when the pump is delivered to the fiber. The electronic contribution to the refractive index change is quantified from the wavelength shift. Using a time-resolved acousto-optic method, we investigate the distribution of pump absorption, and the resulting refractive index change profile, along sections of ytterbium-doped fiber exceeding 1 m long under different pump power levels.
High frequency microwave signal generation using dual-wavelength emission of cascaded DFB fiber lasers with wavelength spacing tunability
2010
[EN] A dual wavelength fiber laser source based on two cascaded phase-shifted fiber Bragg gratings is presented The gratings are written in an erbium-doped fiber each configuring the cavity of a distributed feedback fiber laser The spacing between lasing modes is controlled dynamically by the use of piezoelectric actuators A continuous tuning range of 5-724 pm of the wavelength difference which is equivalent to a photodetected 072-92 GHz range is obtained Efficient generation from the L to the W microwave and millimeter bands has been achieved by heterodyne photodetection of the dual-wavelength optical signal (C) 2010 Elsevier BV All rights reserved
Aging resistance of bio-epoxy jute-basalt hybrid composites as novel multilayer structures for cladding
2017
Abstract Aging resistance of jute reinforced laminates is compared with two jute/basalt hybrid laminates prepared with different stacking sequences (i.e., sandwich and intercalated configuration). To this aim, composites are exposed to cyclic conditions comprising hygrothermal stress and UV radiation to promote an accelerated aging, for a period of 84 days. Specimens of each laminate are tested after 14, 28, 56 and 84 days, respectively. Quasi-static flexural tests, Charpy impact tests and dynamic mechanical tests are performed according to international ASTM and ISO standards. Furthermore, scanning electron microscopy and differential scanning calorimetry are used to evaluate the morpholog…
Experimental investigation of Brillouin and Raman scattering in a 2SG sulfide glass microstructured chalcogenide fiber.
2008
International audience; In this work, we investigate the Brillouin and Raman scattering properties of a Ge15Sb20S65 chalcogenide glass microstructured single mode fiber around 1.55 microm. Through a fair comparison between a 2-m long chalcogenide fiber and a 7.9-km long classical single mode silica fiber, we have found a Brillouin and Raman gain coefficients 100 and 180 larger than fused silica, respectively.