Search results for "Films"

Microscratch testing method for systematic evaluation of the adhesion of atomic layer deposited thin films on silicon

2016

The scratch test method is widely used for adhesion evaluation of thin films and coatings. Usual critical load criteria designed for scratch testing of coatings were not applicable to thin atomic layer deposition (ALD) films on silicon wafers. Thus, the bases for critical load evaluation were established and the critical loads suitable for ALD coating adhesion evaluation on silicon wafers were determined in this paper as LCSi1, LCSi2, LCALD1, and LCALD2, representing the failure points of the silicon substrate and the coating delamination points of the ALD coating. The adhesion performance of the ALD Al2O3, TiO2, TiN, and TaCN+Ru coatings with a thickness range between 20 and 600 nm and dep…

Effect of Molybdate on Corrosion Performance of Oxide Coating Produced on 7075 Al Alloy Using PEO

2022

In this research, plasma electrolytic oxidation (PEO) coatings were prepared on 7075 Al alloy in a silicate-based solution with Na2MoO4 additive using a unipolar waveform at constant current density. The coatings displayed micro-pores, micro-cracks, pancake-like and crater-like features, and also solidified molten oxide particles on the surface. The coatings were majorly composed of Al2O3 (γ, δ, and α), SiO2 (amorphous), and MoO3 phases, which confirms the incorporation of molybdenum in the case of additive-containing coatings. Molybdenum species were transported through cracks, channels, and micropores, as the ready access pathways into the coating and partly sealed the c…

Aluminum tri-isopropoxide as an alternative precursor for atomic layer deposition of aluminum oxide thin films

2019

Due to the safety challenges associated with the use of trimethylaluminum as a metal precursor for the deposition of alumina, different chemicals have been investigated over the years to replace it. The authors have investigated the use of aluminum tri-isopropoxide (TIPA) as an alternative alkoxide precursor for the safe and cost-effective deposition of alumina. In this work, TIPA is used as a stable Al source for atomic layer deposition (ALD) of Al2O3 when different oxidizing agents including water, oxygen plasma, water plasma, and ozone are employed. The authors have explored the deposition of Al2O3 using TIPA in ALD systems operating in vacuum and atmospheric pressure conditions. For the…

Toward Sustainable PLA-Based Multilayer Complexes with Improved Barrier Properties

2019

Poly(lactic acid) or PLA is currently considered as one of the most promising substitutes of conventional plastics, with low environmental impact, especially for food packaging applications. Nevertheless, some drawbacks, such as high permeability to oxygen, are still limiting its industrial applications. The objective of this study was to highly increase the oxygen barrier performance of PLA without compromising its sustainable nature and following the principles of circular economy perspective. Coproducts coming from mill industries, such as wheat gluten proteins (WG), were used to produce PLA-WG-PLA multilayer complexes with improved barrier performance. Different technologies of industri…

Characterization of thin plastic foils for applications in X-ray optics technology

2007

Thin plastic foils are being investigated to build shell optics for X-ray telescopes. Compared to polished glass optics, the advantage is in terms of increased collecting area, light weight and lower cost. Plastic material is also desirable to allow deformation into a complete surface of revolution. We collected plastic materials of common use for industrial applications and also specialty materials developed for the electronic industry. A comparative study was then performed to evaluate the optical quality of the selected plastic films. Surface analysis was carried out with topographic instruments to investigate the microroughness of our samples at different scan lengths. Preliminary resul…

Comparative Investigation on the Soil Burial Degradation Behaviour of Polymer Films for Agriculture before and after Photo-Oxidation

2020

Polymer films based on biodegradable polymers, polyethylene (PE) and modified PE with oxo-degradable additive were prepared by film blowing. Carbon black (1%) was added to all the films. Commercial biodegradable Ecovio&reg

A supported titanium postmetallocene catalyst: Effect of selected conditions on ethylene polymerization

2011

Ethylene polymerization with a titanium complex [N,N-ethylenebis(3-methoxysalicylideneiminato)titanium dichloride] immobilized on the magnesium support with the formula MgCl2(THF)0.32(Et2AlCl)0.36 was studied. In particular, the effects of polymerization temperature, monomer pressure, and polymerization time on the activity of the catalyst and on the polyethylene properties (molecular weight and its distribution, melting point, crystallinity, and bulk density) were evaluated. The findings of investigations prove that the studied supported titanium catalyst is highly active in ethylene polymerization, and its activity increases with increasing temperature and monomer pressure. Moreover, stab…

Weathering of low-density polyethylene grafted with itaconic acid in laboratory tests

2011

Polyethylene grafted with itaconic acid was subjected to weathering under laboratory accelerated conditions. The course of the photo-oxidative degradation process of that material was studied by FTIR spectroscopy both through quantitative measurements of changes in absorbance values at selected wave numbers and through measurements of surface area values for absorption bands which were separated by means of deconvolution. The use of both those procedures of quantitative determinations resulted in a general conclusion that the oxidation process was initiated from the very first moment of irradiation, and it produced ketones, acids, esters (intramolecular and of acetate type), peracids, peres…

Photo-oxidation behaviour of composite polyethylene/MW-CNTs films

2008

Amperometric Biosensor and Front-End Electronics for Remote Glucose Monitoring by Crosslinked PEDOT-Glucose Oxidase

2018

Focusing on the interplay between interface chemistry, electrochemistry, and integrated electronics, we show a novel low-cost and flexible biosensing platform for continuous glucose monitoring. The amperometric biosensing system features a planar three-electrode structure on a plastic substrate, and a wireless near-field communication-powered electronic system performing sensor analog front-end, A/D conversion, digital control, and display tasks. The working electrode is made of electropolymerized poly (3,4-ethylenedioxythiophene) film onto a polyethylene terephthalate/gold electrode followed by immobilization of cross-linked glucose oxidase by glutaraldehyde. The advantages offered by such…