Search results for "Finite Element Analysis"
showing 10 items of 98 documents
On the Effect of Slotted Blades on Savonius Wind Generator Performances by CFD Analysis
2012
In this paper a new bucket configuration for Savonius wind generator is proposed. With the aim to increase the effect of the overlap ratio RS on the wind turbine performances and to increase the amount of lift force able to produce torque and power, slotted blades are investigated by means of the Computational Fluid Dynamics analysis. The numerical analyses are performed by Comsol Multiphysics® and the results obtained for a Savonius wind turbine with overlap only are compared to numerical and experimental benchmarks. Parametric analyses are performed, for fixed overlap ratio, by varying the slot angle β and the results show that for low angle β the Savonius rotor exploits improved performa…
Estimation of interfacial fracture toughness based on progressive edge delamination of a thin transparent coating on a polymer substrate
2010
Evaluation of interfacial toughness of sub-micron-thickness layers deposited on a ductile substrate is a challenging task which has motivated different experimental approaches Fragmentation testing was used in the present study as a means of interface characterization of a silicon-nitride-coated polyimide substrate. During the test, after an initial rapid segmentation-cracking phase, the coating fragments developed edge delaminations which propagated in a stable manner with further increase in the applied strain The debonding process was modelled by the finite element method Incorporating a cohesive zone at the front of the interfacial crack The edge cracks were found to be dominated by mod…
Advanced Monitoring of Rotor Broken Bar in Double Squirrel Cage Induction Machines Based on Wavelet Analysis
2012
The diagnosis of induction machine faults is commonly realized through Motor Current Signature Analysis (MCSA), i.e. by classical spectrum analysis of the input currents. In case of large or double cage induction motors, rotor broken bars fault detection based on sideband current components may fail due to the presence of inter bar currents that reduce the degree of rotor asymmetry, leading to reduced relevance of these spectral components. But inter bar currents produce core vibrations in the axial direction, which can be detected using vibration analysis techniques, in order to overcome the limits of the classical MCSA for these purposes. In this paper, an advanced use of the Discrete wav…
A Micro Wind Generation System for Local DoS Applications
2010
In this paper a wind electrical power generation system for Distributed on Site (DoS) applications is proposed. This system was developed and conceived in order to guarantee simple installation, use and service, obtaining a product that can be easily industrialized and put into the market with limited costs. The field of application of such an electrical generation system is addressed towards domestic or at the most toward condominium applications concerning moreover the opportunity of working in addition to combined photovoltaic and solar-thermal systems to enhance the renewable energy generation at house level (DoS). The proposed system has its hot spot in the blades shape, in the wind fl…
Flying Laser Spot Thermography technique for the NDE of Fibre Metal Laminates disbonds
2017
Abstract The present work investigates the features of an active Infrared-NDT Thermography technique derived from a Flying Laser Spot set-up for the analysis of interlaminar disbonds in layered structures in general and Fibre Metal Laminates in particular. The presented technique uses a laser-spot heat source, which moves at a constant speed, raster scanning the object surface. Interlaminar defects parallel to the surfaces act as barriers towards through-the-thickness heat diffusion. This produces some modifications over the surface thermal field which are well identified in the Standard Deviation calculated over a Reference Area following the heat source. The mechanisms leading to such def…
Effects of particle clustering on the plastic deformation and damage initiation of particulate reinforced composite utilizing X-ray CT data and finit…
2018
In this paper, a new simulation technique which can include microstructural inhomogeneity of particulate reinforced composites is proposed to accurately study deformation pattern and damage mechanism in these composites. Three dimensional microstructures constructed from XCT images incorporated into finite element modeling codes with minimal approximation to capture the effects of cluster size, local volume fraction of particles in the cluster and the distance between clusters as relevant statistical quantities describing the microstructural inhomogeneity of particulate reinforced composites. A quantitative parameter as degree of clustering is defined to consider particle clustering effect.…
Stretch-induced Intussuceptive and Sprouting Angiogenesis in the Chick Chorioallantoic Membrane
2014
Vascular systems grow and remodel in response to not only metabolic needs, but also mechanical influences as well. Here, we investigated the influence of tissue-level mechanical forces on the patterning and structure of the chick chorioallantoic membrane (CAM) microcirculation. A dipole stretch field was applied to the CAM using custom computer-controlled servomotors. The topography of the stretch field was mapped using finite element models. After 3 days of stretch, Sholl analysis of the CAM demonstrated a 7-fold increase in conducting vessel intersections within the stretch field (p 0.05). In contrast, corrosion casting and SEM of the stretch field capillary meshwork demonstrated intense …
Impact of pericardial effusion on cardiac mechanics in patients with dilated cardiomyopathy
2013
Dilated cardiomyopathy (CDM) is a degenerative disease of the myocardium accompanied by left ventricular (LV) remodeling, resulting in an impaired pump performance. Differently, pericardial effusion(PE) is a liquid accumulation in the pericardial cavity, which may inhibit blood filling of heart chambers. Clinical evidence show that PE may improve pump performance in patients with CDM. Therefore, this study aims to assess wall stress and global function of patients with CDM, PE as compared to healthy patient. These findings suggests that CDM has an important implication in the mechanical changes of LV and right ventricle by increasing wall stress and reducing pump function. Conversely, PE de…
Finite element analysis of a Bionate ring-shaped customized lumbar disc nucleus prosthesis
2021
[EN] Study design: Biomechanical study of a nucleus replacement with a finite element model. Objective: To validate a Bionate 80A ring-shaped nucleus replacement. Methods: The ANSYS lumbar spine model made from lumbar spine X-rays and magnetic resonance images obtained from cadaveric spine specimens were used. All materials were assumed homogeneous, isotropic, and linearly elastic. We studied three options: intact spine, nucleotomy, and nucleus implant. Two loading conditions were evaluated at L-3-L-4, L-4-L-5, and L-5-S-1 discs: a 1000 N axial compression load and this load after the addition of 8 Nm flexion moment in the sagittal plane plus 8 Nm axial rotation torque. Results: Maximum nuc…