Search results for "Finite element method"
showing 10 items of 746 documents
Design of RC joints equipped with hybrid trussed beams and friction dampers
2021
Abstract The challenge of this research consists in the first attempt to apply a dissipative friction connection to beam-to-column joints with semi-prefabricated Hybrid Steel-Trussed Concrete Beams (HSTCB) and RC pillars cast in-situ. Nowadays, HSTCBs are widely adopted in civil and industrial buildings and, therefore, it is required to evaluate their compliance with the capacity design criteria and their seismic energy dissipation capability. However, the design of the reinforcement of such beams usually lead to the adoption of large amount of steel within the panel zone which becomes potentially vulnerable to the effects of seismic cyclic actions and dramatically reduce the dissipation ca…
A generalized finite difference method using Coatmèlec lattices
2009
Generalized finite difference methods require that a properly posed set of nodes exists around each node in the mesh, so that the solution for the corresponding multivariate interpolation problem be unique. In this paper we first show that the construction of these meshes can be computerized using a relatively simple algorithm based on the concept of a Coatmelec lattice. Then, we present a generalized finite difference method which provides a numerical solution of a partial differential equation over an arbitrary domain, using the generated meshes. The accuracy and mesh adaptivity of the method is evaluated using elliptical equations in several domains.
The importance of correct implants positioning and masticatory load direction on a fixed prosthesis
2018
Background Through the biomechanical study of dental implants, it is possible to understand the dissipation effects of masticatory loads in different situations and prevent the longevity of osseointegration. Aims: To evaluate the microstrains generated around external hexagon implants, using axial and non-axial loads in a fixed four-element prosthesis with straight implants and implants inclined at 17°. Material and Methods Three implants were modeled using CAD software following the manufacturer's measurements. Then, implants were duplicated and divided into two groups: one with straight implants and respective abutments, and the other with angled implants at 17° and respective abutments. …
A mathematical simulation of high temperature induction heating of electroconductive solids
2007
The mathematical model of non-stationary coupled electromagnetic and thermal processes in polarizable and magnetizable axisymmetric electroconductive solids subjected to electromagnetic field generated by external currents is proposed. The processes parameters are connected through heat sources and temperature dependence of material characteristics. The problem is solved by finite element method. The process of induction heating of a finite steel cylinder is considered.
Microwave heating of water in a rectangular waveguide: Validating EOF-Library against COMSOL multiphysics and existing numerical studies
2019
The purpose of this work is two-fold: first, we successfully validate our open-source tool EOF-Library, which efficiently couples Elmer FEM and OpenFOAM, against COMSOL Multiphysics, a commercial simulation package; second, we inform about significant discrepancies between our results and the experimental and simulation data found in a series of research papers. We reproduce the previously published numerical simulations wherein microwaves are supplied to a water domain through a rectangular waveguide, inducing convective flow. This is a conjugate problem with weakly coupled electromagnetics, heat transfer and fluid dynamics. It involves effects such as permittivity dependence on temperatur…
Friction Stir Welding Of AA6082-T6 Sheets: Numerical Analysis And Experimental Tests
2004
3D numerical simulation of the Friction Stir Welding process is developed with the aim to highlight the process mechanics in terms of metal flux and temperature, strain and strain rate distributions. The numerical results have been validated though a set of experimental tests.
Modeling of Magnetoresistive-Based Electrical Current Sensors: A Technological Approach
2007
The utilization of modeling tools can, in many cases, help us in the design and final prototyping of any sort of sensors. In this paper, we describe a finite-element method (FEM) model applied to a hybrid technology involving a full Wheatstone bridge spin-valve-based electrical current sensor. After validating the model against experimental results, we focus our studies on geometrical aspects of the sensor configuration, in order to detect possible deviations that may have occurred during the fabrication process. In this regard, the characteristics of the behavior of the sensor depending on lateral displacements and inclination are included. Moreover, the frequency response of the sensor is…
Bonding prediction in friction stir consolidation of aluminum alloys: A preliminary study
2018
Friction Stir Consolidation (FSC) is a solid-state process that results in consolidation of metal powders or chips producing solid billet through severe plastic deformation and the solid-state bonding phenomena. This process can be used both for primary production and for metal scrap recycling. During the FSC process, a rotating die is plunged into a hollow chamber containing the finely divided, unconsolidated material to be processed. In this paper, a FEM numerical model for the prediction of the quality of the consolidated billet is presented. In particular, a dedicated bonding criterion that takes into account the peculiar process mechanics of this innovative technology is proposed.
A technical note on an experimental device to measure friction coefficient in sheet metal forming
2006
Abstract In the paper the authors present the results of several experimental tests aimed to determine the Coulomb friction coefficient in sheet metal forming operations at the varying of the sheet metal material and for different operative conditions. In particular a few pressure and lubricating conditions have been investigated. In order to develop such experiments a dedicated fixture was designed and set-up starting from the one proposed by Wilson.
Thermo-mechanical analysis of irradiation swelling and design optimization of the IFMIF target assembly with bayonet backplate
2017
Abstract The availability of a high flux neutron source for testing candidate materials under irradiation conditions, which will be typically encountered in future fusion power reactors (ITER, DEMO, FPR), is a fundamental step towards the development of fusion energy. To this purpose, the International Fusion Materials Irradiation Facility (IFMIF) represents the reference option to provide the fusion community with a DEMO-relevant neutron source capable of irradiating samples at a damage rate of up to 20 dpa/fpy (in steel) in a volume of 0.5 l. In the framework of the engineering design activities of IFMIF, ENEA is committed in the design of the lithium target assembly (TA) with removable (…