Search results for "Finite element"
showing 10 items of 892 documents
Strength and ductility of RC jacketed columns: A simplified analytical method
2016
Abstract Reinforced concrete (RC) jacketing is a common method for retrofitting existing columns with poor structural performance. It can be applied in two different ways: if the continuity of the jacket is ensured, the axial load of the column can be transferred to the jacket, which will be directly loaded; conversely, if no continuity is provided, the jacket will induce only confinement action. In both cases the strength and ductility evaluation is rather complex, due to the different physical phenomena included, such as confinement, core–jacket composite action, preload and buckling of longitudinal bars. Although different theoretical studies have been carried out to calculate the confin…
Hydraulic Models and Finite Elements for Monitoring of an Earth Dam, by Using GNSS Techniques
2016
This work gives a comparison between different mathematicalmodels for the evaluation of the movements of an earthendam situated between Bivona and Alessandria della Rocca, inthe province of Agrigento (AG), Italy. The models selected areof a hydraulic nature, already tested on concrete dams, andfinite elements models which, on the contrary, exploit geotechnicalparameters. The results obtained from the comparisonof the displacement planimetric components and the relativetime series of data over a period of two years appear to befully satisfactory, in fact using both models of a hydraulic andgeotechnical nature, we reach residues of just mm. To supportthis work, a monitoring procedure using GN…
ALE Simulation of Orthogonal Cutting: a New Approach to Model Heat Transfer Phenomena at the Tool-Chip Interface
2007
This paper presents a new procedure to evaluate the global heat transfer coefficient in orthogonal cutting. The knowledge of the actual heat transfer conditions is a fundamental issue as far as the life, tool wear and tool substitution interval are regarded. More in detail, an Arbitrary Lagrangian-Eulerian approach was utilised to model orthogonal cutting process and the numerical simulations were validated by making experimental tests for identifying cutting forces and internal tool temperatures. A mild steel was cut utilising both an uncoated (WC) and a coated (TiN) tool. On the basis of both experimental and simulative data, a consistent model of the global heat transfer coefficient as f…
Load Response and Finite Element Modelling of Bonded Loading Hoses
2014
Steel reinforced bonded vulcanized rubber loading hoses are frequently used in offshore oil loading systems. The hoses are used as offloading system between platforms and shuttle tankers and represent a flexible economical feasible solution for hydrocarbon transfer. The reliability of these hoses throughout the service life is an important issue both with respect to operational availability and with respect to environmental safety. Hence, the load bearing capacity of these hoses and the fatigue endurance become matters of concern and important design topics. Due to the large deformation of these hoses and the complicated composite structure in the hose wall, the hoses are difficult to analy…
Springback evaluation in fully 3-D sheet metal forming processes
1997
Abstract In the modern manufacturing industries the knowledge and proper control of the sheet metal springback after forming is a fundamental aspect in the achievement of near net shape stamped parts. In this paper an effective springback prediction in some fully three-dimensional stamping processes is carried out. Such a prediction is based on a combined approach in which an explicit finite element code has been employed to simulate the forming phase while a traditional implicit procedure has been used to analyse the springback phase. The results obtained have been compared with a set of experimental tests and an excellent correlation between the predicted and experimental data has been fo…
Investigation of thick sheet AHSS springback in combined bending under tension
2012
In this paper, we investigate the springback behavior of several advanced high-strength sheet steels (TRIP, Dual-Phase, ferrite-bainite) with thicknesses up to 4 mm. Samples were tested by means of the bending-under-tension (BUT) test. The BUT has been extensively applied, in the literature, to relatively thin (1 mm and thinner) sheet metals for automotive applications; the applicability of several guidelines from the literature was investigated in this work in the context of thick advanced high strength steel (AHSS) sheets and using a sample width of 12 mm. The monotonic decrease of springback as back force increased was confirmed for this category of sheet steels, and a general trend for …
A practical approach for the strength evaluation of RC columns reinforced with RC jackets
2015
Abstract Reinforced concrete (RC) jacketing is nowadays one of the most common techniques adopted for seismic retrofitting of existing RC columns. It is used to increase load-carrying capacity and ductility of weak existing members by means of a simple and cheap method. The structural efficiency is related to two main effects: – the enlargement of the transverse cross section; – the confinement action provided by the external jacket to the inner core. Several theoretical and experimental studies were addressed in the past to investigate on how it is possible to calculate the strength enhancement due to these effects and to highlight the main key parameters influencing the structural behavio…
Multi-objective optimization of nitinol stent design.
2017
Nitinol stents continuously experience loadings due to pulsatile pressure, thus a given stent design should possess an adequate fatigue strength and, at the same time, it should guarantee a sufficient vessel scaffolding. The present study proposes an optimization framework aiming at increasing the fatigue life reducing the maximum strut strain along the structure through a local modification of the strut profile.The adopted computational framework relies on nonlinear structural finite element analysis combined with a Multi Objective Genetic Algorithm, based on Kriging response surfaces. In particular, such an approach is used to investigate the design optimization of planar stent cell.The r…
On the effectiveness of numerical simulation in the prediction of profile distortion in extrusion
2005
Among the so-called ‘traditional processes’, extrusion represents one of the most diffused and utilized, since it permits the production of many industrial parts and raw materials. Of course, relevant knowledge on process mechanics and practice is nowadays available in the technical literature and in properly constructed handbooks. On the other hand, the introduction of finite element simulation, as a powerful analysis and design tool, opened new perspectives. Nowadays many researchers are involved in research tasks aimed at explaining some peculiar extrusion aspects. In this paper the effectiveness of numerical simulation for a complex three-dimensional extrusion process analysis is inves…
3D finite element analysis of tool wear in machining
2008
Abstract The paper is focused on the 3D numerical prediction of tool wear in metal cutting operations. In particular, an analytical model, able to take into account the diffusive wear mechanism, was implemented through a specific subroutine. Furthermore, an advanced approach to model heat transfer phenomena at the tool–chip interface was included in the numerical simulation. The adopted simulation strategy gave the possibility to properly evaluate the tool wear. The 3D FEM results were compared with some experimental data obtained turning AISI 1045 steel using uncoated WC tool; a good agreement was found out.