Search results for "Flexural Strength"
showing 10 items of 170 documents
The use of steel angles for the connection of laminated glass beams: Experiments and modelling
2012
Abstract In the present paper the experimental results relative to three-point bending tests on multilayer glass beams and on semi-rigid connections realised with stainless double web angles are presented and discussed. Small and medium size glass beams were tested and load–deflection curves and crack patterns at failure were recorded. The laminated glass specimens, of equal cross-section, were characterised by three different combinations of annealed float and fully thermally tempered glass plies and different interlayers. Steel joints constituted by double web angles to connect two glass beams were tested adopting several geometrical configurations and using stainless steel bolts preloade…
Use of fiber-section beam elements for modelling the monotonic flexural response of RC jacketed columns
2021
Abstract The use of reinforced concrete (RC) jacketing is a common technique for retrofitting existing RC columns with poor structural performances. Literature studies highlighted that the relative slip occurring at the interface between the new and the old concrete can affect substantially the flexibility and the strength of the retrofitted member. For this reason, several interface treatments are usually applied, aiming to induce a monolithic behaviour to the column. However, despite the commonness of RC jacketing, a limited number of studies investigated numerical modelling strategies for including these phenomena, especially with reference to the development of numerical models for desi…
Flexible minerals: self-assembled calcite spicules with extreme bending strength.
2013
Flexi-Fibers Glass or metal fibers can show incredible flexibility. Natalio et al. (p. 1298 ; see the Perspective by Sethmann ) used the protein silicatein-α, which is responsible for the biomineralization of silicates in sponges, to guide the formation of spicules made of calcite. These synthetic spicules could be bent to a high degree because of their inherent elasticity, whilst retaining the ability to guide light.
Microstructure, mechanical characteristics and cell compatibility of β-tricalcium phosphate reinforced with biodegradable Fe–Mg metal phase
2015
The use of beta-tricalcium phosphate (β-TCP) ceramic as a bioresorbable bone substitute is limited to non-load-bearing sites by the material׳s brittleness and low bending strength. In the present work, new biocompatible β-TCP-based composites with improved mechanical properties were developed via reinforcing the ceramic matrix with 30 vol% of a biodegradable iron-magnesium metallic phase. β-TCP-15Fe15Mg and β-TCP-24Fe6Mg (vol%) composites were fabricated using a combination of high energy attrition milling, cold sintering/high pressure consolidation of powders at room temperature and annealing at 400 °C. The materials synthesized had a hierarchical nanocomposite structure with a nanocrystal…
Bioresorbable β-TCP-FeAg nanocomposites for load bearing bone implants: High pressure processing, properties and cell compatibility.
2017
In this paper, the processing and properties of iron-toughened bioresorbable β-tricalcium phosphate (β-TCP) nanocomposites are reported. β-TCP is chemically similar to bone mineral and thus a good candidate material for bioresorbable bone healing devices; however intrinsic brittleness and low bending strength make it unsuitable for use in load-bearing sites. Near fully dense β-TCP-matrix nanocomposites containing 30vol% Fe, with and without addition of silver, were produced employing high energy attrition milling of powders followed by high pressure consolidation/cold sintering at 2.5GPa. In order to increase pure iron's corrosion rate, 10 to 30vol% silver were added to the metal phase. The…
Microstructure and mechanical effects of spark plasma sintering in alumina monolithic ceramics
2013
The specific effects of spark plasma sintering (SPS) on the creep behavior, microstructure and mechanical properties of alumina monolithic ceramic were investigated. SPS introduces strains that concentrate at grain boundaries and inhibit crack growth, resulting in an improvement in the flexural strength and fracture toughness. However, creep blocks grain boundary movements and decreases the reliability of the material. These strains can be removed by a post-sintering thermal treatment, which plays an important role in the distribution of dislocations.
Mechanical performance of experimental acrylic resins modified by nanoparticles after chemical and mechanical degradation.
2020
Background Different materials have been incorporated into the polymethylmethacrylate matrix to improve its performance. The aim of this study was to evaluate the degree of conversion (DC), the flexural strength (FS), the elasticity modulus (EM), and the effect of exposure to food-simulating liquids prior to brushing simulation on the gloss loss (GL) of experimental acrylic resins modified by nanoparticles. Material and methods Three different types of nanoparticles; silicon oxide (SiO2), cerium oxide (CeO2) and titanium oxide (TiO2) were added to a poly (methylmethacrylate) matrix, in proportions of 0.5wt%, 1wt% and 3wt% each, forming nine experimental groups. The acrylic resin was also te…
Evolution Characteristics of Delamination Damage in CFRP Composites Under Transverse Loading
2012
The initiation and subsequent progression of delamination in CFRP composite laminates is examined using finite element method. A 12-ply CFRP composite, with a total thickness of 2.4 mm and anti-symmetric ply sequence is simulated under three-point bend test setup. Each unidirectional composite lamina is treated as an equivalent elastic and orthotropic panel. Interface behavior is defined using cohesive damage model. Complementary three-point bend test on the specimen is performed at crosshead speed of 2 mm/min. The measured load–deflection response at mid-span location compares well with predicted values. Interface delamination accounts for up to 46.7% reduction in flexural stiffness from t…
Are there any differences in various polyaxial locking systems? A mechanical study of different locking screws in multidirectional angular stable dis…
2012
Numerous angular stable plates for the distal radius exist, and technically based comparisons of the polyaxial locking interfaces are lacking. The aim of this mechanical study was to investigate three different locking interfaces of angular stable volar plates by cantilever bending: VA-LCP Two-Column Distal Radius Plates 2.4 mm (Synthes® GmbH, Oberdorf, Switzerland), IXOS® P4 (Martin, Tuttlingen, Germany) and VariAX™ (Stryker®, Duisburg, Germany). We assessed the strength of 0°, 5°, 10° and 15° screw locking angles and tested the bending strength from 10° to 5° angles by cyclic loading until breakage. The final setup repeated the above assessments by inclusion of four locking screws. The si…
Some comments on the experimental behavior of FRC beams in flexure
2008
In the present paper the experimental results, recently obtained by the authors, regarding the monotonic and the cyclic flexural response of normal and high-strength concrete beams reinforced with steel bars and discontinuous fibers, are shown. From the experimental results, all referred to low values of shear-to-depth ratios, it emerges clearly that the shear failure is brittle especially under cyclic actions highlighting the role of the fibers in the flexural behavior of the beams. The cyclic action produces a significant decay in the stiffness and in the strength capacity of the beams, and the addition of fibers reduces these negative effects. Form theoretical point of view good agreemen…