Search results for "Fluid Dynamic"
showing 10 items of 1034 documents
Wall collision and drug-carrier detachment in dry powder inhalers: Using DEM to devise a sub-scale model for CFD calculations
2018
Abstract In this work, the Discrete Element Method (DEM) is used to simulate the dispersion process of Active Pharmaceutical Ingredients (API) after a wall collision in dry powders inhaler used for lung delivery. Any fluid dynamic effects are neglected in this analysis at the moment. A three-dimensional model is implemented with one carrier particle (diameter 100 μm) and 882 drug particles (diameter 5 μm). The effect of the impact velocity (varied between 1 and 20 m s−1), angle of impact (between 5° and 90°) and the carrier rotation (±100,000 rad s−1) are investigated for both elastic and sticky walls. The dispersion process shows a preferential area of drug detachment located in the southe…
Experiments and predictions of the transition of the flow pattern with impeller clearance in stirred tanks
2001
In the present work, the double- to single-loop flow pattern transition in a stirred vessel equipped with a Rushton turbine is investigated by Laser Doppler anemometry (LDA). In particular, the clearance at which such transition occurs is assessed by comparing axial velocity profiles underneath the impeller. Computational fluid dynamics (CFD) simulations of the same system are carried out, by employing the 'inner-outer' fully predictive computation strategy. The comparison of predicted results with the experimental data collected shows that the transition is well reproduced by simulations. A good agreement on the mean velocities is also observed but for the impeller discharge stream angle t…
Effect of material and geometric parameters on natural convection heat transfer over an eccentric annular-finned tube
2019
In this work, the performance of an eccentric annular finned tube heat exchanger under natural convection conditions has been investigated numerically. The objective of the study is to analyse the ...
On the bubbling dynamics of binary mixtures of powders in 2D gas-solid fluidized beds
2012
Abstract The bubbling behavior of fluidized beds has been thoroughly investigated in the last decades by means of several techniques (e.g. X-ray, Inductance, Resistance and Impedance based techniques). In recent years, Digital Image Analysis Techniques have shown their potential for accurate and cost effective measurements. Most of the works related to the experimental analysis of bubble behavior in the field of gas-solid fluidization actually deal with monodispersed particles although almost all industrial equipments operate with mixtures of particles. Among the works available in literature dealing with mixtures of particles having different diameters and/or densities, most of them aim at…
Membrane distillation heat transfer enhancement by CFD analysis of internal module geometry
2011
Module geometry optimisation can be a crucial matter in all separation processes using selective or hydrophobic membranes, e.g. reverse osmosis (RO) and membrane distillation (MD). In fact the choice of suitable channel shape and size can dramatically affect the performance of the process. With reference to the membrane distillation process, temperature polarization phenomena and pres¬sure drops along the channels largely affect the process efficiency (i.e. the efficient use of temperature driving force for the passage of vapour through the membrane) as well as pressure distribution, module mechanical resistance and pumping costs. Several works have been presented so far in literature on th…
Crystallization of hard spheres revisited. II. Thermodynamic modeling, nucleation work, and the surface of tension
2018
Combining three numerical methods (forward flux sampling, seeding of droplets, and finite-size droplets), we probe the crystallization of hard spheres over the full range from close to coexistence to the spinodal regime. We show that all three methods allow us to sample different regimes and agree perfectly in the ranges where they overlap. By combining the nucleation work calculated from forward flux sampling of small droplets and the nucleation theorem, we show how to compute the nucleation work spanning three orders of magnitude. Using a variation of the nucleation theorem, we show how to extract the pressure difference between the solid droplet and ambient liquid. Moreover, combining th…
Modelling and simulation of gas-liquid hydrodynamics in mechnically stirred tanks
2007
Abstract Computational fuid dynamics (CFD) is an increasingly important tool for carrying out realistic simulations of process equipment. In the case of multiphase systems the development of CFD models is less advanced than for single-phase systems. In the present work CFD simulations of gas–liquid stirred tanks are reported. An Eulerian–Eulerian multi-fluid approach is used in conjunction with the simplest two-phase extension of the k–ɛ turbulence model. All bubbles are assumed to share the same size. The effect of inter-phase forces on simulation results is separately considered. As concerns drag, it is shown that the sole parameter needed to characterize the dispersed phase behaviour is …
Thermal-hydraulic behaviour of the DEMO divertor plasma facing components cooling circuit
2017
Abstract Within the framework of the Work Package DIV 1 – “Divertor Cassette Design and Integration” of the EUROfusion action, a research campaign has been jointly carried out by ENEA and University of Palermo to investigate the thermal-hydraulic performances of the DEMO divertor cassette cooling system. A comparative evaluation study has been performed considering three different options for the cooling circuit layout of the divertor Plasma Facing Components (PFCs). The potential improvement in the thermal-hydraulic performance of the cooling system, to be achieved by modifying cooling circuit layout, has been also assessed and discussed in terms of optimization strategy. The research acti…
3D simulations of wind-jet interaction in massive X-ray binaries
2010
High-mass microquasars may produce jets that will strongly interact with surrounding stellar winds on binary system spatial scales. We study the dynamics of the collision between a mildly relativistic hydrodynamical jet of supersonic nature and the wind of an OB star. We performed numerical 3D simulations of jets that cross the stellar wind with the code Ratpenat. The jet head generates a strong shock in the wind, and strong recollimation shocks occur due to the initial overpressure of the jet with its environment. These shocks can accelerate particles up to TeV energies and produce gamma-rays. The recollimation shock also strengthens jet asymmetric Kelvin-Helmholtz instabilities produced i…
Shaken Snow Globes: Kinematic Tracers of the Multiphase Condensation Cascade in Massive Galaxies, Groups, and Clusters
2018
We propose a novel method to constrain turbulence and bulk motions in massive galaxies, groups and clusters, exploring both simulations and observations. As emerged in the recent picture of the top-down multiphase condensation, the hot gaseous halos are tightly linked to all other phases in terms of cospatiality and thermodynamics. While hot halos (10^7 K) are perturbed by subsonic turbulence, warm (10^4 K) ionized and neutral filaments condense out of the turbulent eddies. The peaks condense into cold molecular clouds (< 100 K) raining in the core via chaotic cold accretion (CCA). We show all phases are tightly linked via the ensemble (wide-aperture) velocity dispersion along the line o…