Search results for "Fluid flow"
showing 10 items of 405 documents
Independent friction-restitution modeling of two-disk collisions
2021
[EN] The oblique collisions between two axisymmetric disks moving on a flat horizontal surface are described in terms of impact modeling based on the assumption that normal and tangential restitution mechanisms operate independently of friction. Describing these mechanisms in terms of the usual Coulomb formulation, the model allows for an interpretation of some ¿anomalous¿ experimental data reported in the literature. These experimental data, corresponding to the variation of the coefficients of friction and tangential restitution with the impact angle, remained unexplained in classic formulations, are understood within the framework of the independent friction-restitution closure. Experime…
Rotating magnetic dipole-driven flows in a conducting liquid cylinder
2021
Four configurations of a rotating magnetic dipole-driven turbulent flow in an electrically conducting liquid cylinder are considered by spectral direct numerical simulation. These configurations differ by parallel or perpendicular orientation of the dipole rotation vector with respect to the nearest surface of the cylinder or its axis. The rotating dipole generates electromagnetic force in a thin outer liquid layer facing it. A concentrated vortex is driven when the dipole rotation vector is perpendicular to the nearest surface. This vortex closely resembles the rotating disk-driven flow. When the dipole rotation vector is parallel to the nearest surface, then a distributed vortex occurs ak…
A study of turbulent heat transfer in curved pipes by numerical simulation
2013
Abstract Turbulent heat transfer in curved pipes was studied by numerical simulation. Two curvatures δ (pipe radius a/curvature radius c) were considered, 0.1 and 0.3; results were also obtained for a straight pipe (δ = 0) for comparison purposes. A tract of pipe 5 diameters in length was chosen as the computational domain and was discretized by finite volume multiblock-structured grids of ∼5.3 × 106 hexahedral cells. Fully developed conditions were assumed; the friction velocity Reynolds number was 500, corresponding to bulk Reynolds numbers between 12 630 and ∼17 350 according to the curvature, while the Prandtl number was 0.86 (representative of saturated liquid water at 58 bar). Simulat…
An experimental investigation on natural convection of air in a vertical channel
1993
Abstract The free convection of air in a vertical channel is studied experimentally in a laboratory model of height H = 2.6 m and rectangular cross-section b × s , with b = 1.2 m and the channel width s variable. One of the channel walls is heated with a uniform heat flux. Tests are made with different values of channel gap and heating power ( s = 7.5, 12.5, 17 cm; q c = 48–317 W m −2 ). On the basis of the results two empirical formulae are found, giving Nu and Re as functions of Ra and the geometrical parameter s/H ; Nu = 0.9282 Ra 0.2035 (s/H) 0.8972 ; Re = 0.5014 Ra 0.3148 (s/H) 0.418 . The mathematical form of these relationships reproduces other previously published formulae, valid fo…
Heat and work fluxes in thermoelectric coolers
2021
Abstract Thermodynamics considers heat and work as the observables of energy. Then, in a non-equilibrium process, the fluxes of heat, work and energy are related. The expressions for the heat and energy flux densities are well known; although several conventions have been adopted. The work flux density defined from the heat and energy flux densities can be very useful in describing the energy balance when chosen to emphasize observable quantities. This paper discusses the advantages of the use of the conduction heat flux density given by Fourier’s law and a work flux density defined from it. As a case study, heat and work fluxes are evaluated in the elements of a thermoelectric cooler using…
Constraints on the spatial variation of Planck constant
2021
AbstractInspired by recently published researches, we present two protocols for setting an upper limit to the claimed variation of$$\hbar $$ħupon the position. The protocols, both within today state of art, involve the use of two delayed laser pulses driving an atom. The distinct positions of the laboratory, due to the Earth motion, affects$$\hbar $$ħand hence the atomic dynamics. The first protocol measures the difference in population of the atomic ground state while the second one the red-shift of the harmonics emitted by the atom in the two moments of the experiment. The protocols improve the reported upper limit of$$\varDelta \hbar /\hbar $$Δħ/ħ. The theory shows that$$\hbar (\varvec{r…
Analysis of a severe pollution episode in Valencia (Spain) and its effect on ground level particulate matter
2013
Abstract This study analyzes the atmospheric particles concentration at ground level during a severe pollution event that took place in Valencia (Spain) from 7 to 12 February 2011. The episode was related to a subtropical anticyclone system that affected the Iberian Peninsula and western Europe. The dominant anticyclone imposed an extended low gradient pressure system and a low mixing layer height in the region that caused the accumulation of pollutants over the western Mediterranean. Moreover, the stagnant conditions led to the formation of the local sea breeze, accompanied by an increase of relative humidity and the decrease of ambient temperature. Our study is mainly focused on the analy…
Investigation of flow and heat transfer in corrugated passages—I. Experimental results
1996
Abstract An experimental and numerical study of flow and heat transfer was conducted for a crossed-corrugated geometry, representative of compact heat exchangers including air preheaters for fossil-fuelled power plant. In this paper, we describe the method of applying thermochromic liquid crystals and true-colour image processing to give local Nusselt number distribution over the surface, and average Nu, both of quantitative reliability; a careful uncertainty analysis is also presented. Typical experimental results for heat transfer and pressure drop are presented and discussed for various geometries and Reynolds numbers, and are compared with literature data. Numerical predictions are disc…
Enhancement of heat exchanger thermal hydraulic performance using aluminum foam
2018
Abstract This paper deals with an experimental study of a turbulent forced convection in a rectangular channel partly fitted with aluminum metallic foam blocks. Experiments were carried out on samples having a constant porosity of 93.8%, different grades of 5, 20 and 40 PPI, and three different height ratios of 0.6, 0.8 and 1. The blocks were arranged in a baffle like configuration. A constant heat flux of 2 W/cm2 was applied on the bottom wall of the test section, while air velocity was varied from 1 to 5 m·s−1. Temperatures of the wall along the flow direction as well as those of the inlet and outlet sections have been measured. Additionally, pressure drop measurements across the aluminum…
Ab Initio Phase Diagram of Chromium to 2.5 TPa
2022
Chromium possesses remarkable physical properties such as hardness and corrosion resistance. Chromium is also a very important geophysical material as it is assumed that lighter Cr isotopes were dissolved in the Earth’s molten core during the planet’s formation, which makes Cr one of the main constituents of the Earth’s core. Unfortunately, Cr has remained one of the least studied 3d transition metals. In a very recent combined experimental and theoretical study (Anzellini et al., Scientific Reports, 2022), the equation of state and melting curve of chromium were studied to 150 GPa, and it was determined that the ambient body-centered cubic (bcc) phase of crystalline Cr re…