Search results for "Fondamenti"
showing 10 items of 542 documents
Application of thermally exfoliated g-C3N4 for a green selective photocatalytic oxidation of 5-hydroxymethyl-2-furfural
2016
Graphitic carbon nitride assisted partial photocatalytic oxidation of 5-hydroxymethyl-2-furfural (HMF) in aqueous medium was investigated. Different carbon nitride precursors were considered, being melamine the one yielding the most efficient photocatalyst. The obtained 30% selectivity of HMF oxidation towards 2,5-furandicarboxaldehyde (FDC) is higher than those reported up to now. A further thermal exfoliation of the g-C3N4 samples showed under artificial light irradiation both an enhanced photocatalytic activity in conversion of HMF, and selectivity (ca. 42-45 %) towards FDC. The performance of the catalysts increased when the experiments were carried out under real outdoor illumination, …
Selective photocatalytic oxidation of 5-hydroxymethyl-2-furfural to 2,5-furandicarboxyaldehyde in aqueous suspension of g-C3N4
2017
Graphitic carbon nitride assisted partial photocatalytic oxidation of 5-hydroxymethyl-2-furfural (HMF) in aqueous medium was investigated. Different carbon nitride precursors were considered, being melamine the one yielding the most efficient photocatalyst. The obtained 30% selectivity of HMF oxidation to 2,5-furandicarboxaldehyde (FDC) is higher than those reported up to now. A further thermal exfoliation of the g-C3N4 samples showed under artificial light irradiation both an enhanced photocatalytic activity in conversion of HMF, and selectivity (ca. 42–45%) to FDC. The performance of the catalysts increased when the experiments were carried out under real outdoor illumination, reaching 50…
Selective photocatalytic oxidation of 5-hydroxymethyl-2-furfural in aqueous suspension of polymeric carbon nitride and its adduct with H2O2 in a sola…
2018
Abstract This work reports a study on the reactivity of polymeric carbon nitride (PCN) and PCN-H2O2 adduct samples for sunlight photocatalytic selective oxidation reactions. The characterization of these materials was reported in a previous paper where the reactivity towards the partial oxidation of 5-hydroxymethylfurfural (HMF) was studied by using two different laboratory scale photoreactors; one irradiated by UV lamps and the other one by natural sunlight. In the present study it has been confirmed the effectiveness of these C3N4 based materials for the selective partial oxidation of HMF to FDC (2,5-furandicarboxaldehyde) in aqueous medium in a pilot plant photoreactor irradiated by natu…
Confronto tra attività catalitica e fotocatalitica dell’eteropoliacido di Keggin H3PW12O40 supportato su ossidi o su nanotubi di carbonio
2015
Catalytic and catalytic photo-assisted dehydration of 2-propanol to form propene in gas-solid regime at atmospheric pressure and 80°C was carried out by using a Keggin heteropolyacid H3PW12O40 (PW12) supported on different oxides. Binary materials have been prepared by impregnation of PW12 on different commercial and home prepared supports (TiO2, SiO2 or carbon nanotubes). The supported Keggin PW12 species played a key role both for the catalytic and the photo-assisted catalytic reactions, due to their strong acidity and ability to form strong oxidant species under UV irradiation, respectively. The contemporary presence of heat and UV light improved the activity of almost all POM supported …
In-situ gelling xyloglucan formulations as 3D artificial niche for adipose stem cell spheroids.
2020
Abstract Three-dimensional spheroidal cell aggregates of adipose stem cells (SASCs) are a distinct upstream population of stem cells present in adipose tissue, with enhanced regeneration properties in vivo. The preservation of the 3D structure of the cells, from extraction to administration, can be a promising strategy to ensure optimal conditions for cell viability and maintenance of stemness potential. With this aim, an artificial niche was created by incorporating the spheroids into an injectable, in-situ gelling solution of partially degalactosylated xyloglucan (dXG) and an ad hoc formulated culture medium for the preservation of stem cell spheroid features. The evolution of the mechani…
Valorisation of industrial iron oxide waste to produce magnetic barium hexaferrite
2016
Barium M-type hexagonal ferrite (BaM, BaFe12O19) is an immensely important magnetic material, which we have successfully made from the simple valorisation of Fe-rich industrial waste from steel wire drawing, with addition of BaCO3 and heating in air to 1000 degrees C. The optimum ratio of Fe. Ba (producing 86 wt% BaM) was found to be 11: 1 (non-stoichiometric), and secondary phases of alpha-Fe2O3 (non-magnetic) and ZnFe2O4 (poorly antiferromagnetic) were always present. This material consisted of small submicron platelets. A hard magnetic ferrite was produced with Ms=48.6 A m(2) kg(-1) and H-c=211.5 kA m(-1). The highest density was achieved by sintering samples with Fe: Ba ratios of 11: 1 …
A comparison between photocatalytic and catalytic oxidation of 2-Propanol over Au/TiO2-CeO2 catalysts
2016
Abstract Photocatalytic and catalytic oxidation of 2-propanol, representative of volatile organic compounds (VOC’s), were compared over mixed TiO 2 –CeO 2 -based catalysts. The effect of different amounts of CeO 2 and the presence of gold (1 wt%) on TiO 2 was investigated. In the photocatalytic oxidation CeO 2 had a negative effect on the performance towards the alcohol conversion of both TiO 2 –CeO 2 and Au/TiO 2 –CeO 2 catalysts, being Au/TiO 2 the most active system. On the contrary mixed TiO 2 –CeO 2 and Au/TiO 2 –CeO 2 samples showed a higher catalytic oxidation efficiency for 2-propanol conversion compared to the single oxides. In this case Au/CeO 2 catalyst had the best performance. …
Exploring the photothermo-catalytic performance of brookite tio2-ceo2 composites
2020
The thermocatalytic, photocatalytic and photothermo-catalytic oxidation of some volatile organic compounds (VOCs), 2-propanol, ethanol and toluene, was investigated over brookite TiO2-CeO2 composites. The multi-catalytic approach based on the synergistic effect between solar photocatalysis and thermocatalysis led to the considerable decrease in the conversion temperatures of the organic compounds. In particular, in the photothermo-catalytic runs, for the most active samples (TiO2-3 wt% CeO2 and TiO2-5 wt% CeO2), the temperature at which 90% of VOC conversion occurred was about 60 °
Alkyloxy modified pyrene fluorophores with tunable photophysical and crystalline properties
2019
Novel alkyloxy modified 2,7-di-tert-butyl-4,5,9,10-tetra(arylethynyl)pyrenes were prepared through a straightforward Sonogashira coupling approach. Optical properties such as quantum yields and absorption/emission spectra of the fluorophores were investigated by UV/Vis and fluorescence measurements. Aggregation induced excimer formation of the chromophores in polar solvents and in the solid state was proved by the presence of a characteristic bathochromically shifted emission band and a decrease of the emission capability. These results strongly indicate the unexpected observation that the excimer formation of adjacent pyrene rings is not prevented by the introduction of bulky tert-butyl su…
Nanogel-antimiR-31 conjugates affect colon cancer cells behaviour
2017
Soft and flexible nanogels, produced by electron beam (e-beam) irradiation of poly(N-vinyl pyrrolidone) and acrylic acid, were evaluated as delivery devices of the inhibitor of miR-31, a small RNA molecule with an important role in colorectal cancer (CRC) progression. The nanogel carriers developed possess both carboxyl and primary amino groups; the former were activated to react with the primary amino group present in the purposely-functionalised AntimiR-31. Very high conjugation reaction yields were attained, as well as a remarkable colloidal and storage stability of the conjugates. The ability of these nanoconstructs to be internalized by cells and the specific interaction of conjugated …