Search results for "Fourier transform"
showing 10 items of 1138 documents
Photosensitive functionalized surface-modified quantum dots for polymeric structures via two-photon-initiated polymerization technique.
2015
In this paper, the surface modification of CdSe- and CdZnS-based quantum dots (QDs) with a functional silica shell is reported. Functionalized silica shells are prepared by two routes: either by ligand exchange and a modified Stober process or by a miniemulsion process with amphiphilic poly(oxyethylene) nonylphenylether also know as Igepal CO-520 (IG) as oligomeric amphiphile and modified silica precursors. The polymerizable groups on the functionalized silica shell allow covalent bonding to a polymer matrix and prevent demixing during polymerization and crosslinking. This allows the homogeneous incorporation of QDs in a crosslinked polymer matrix. This paper furthermore demonstrates that t…
FT-IR and dielectric study of water/AOT liquid crystals
2000
Abstract In order to explore the influence of microwave radiation on highly viscous microheterogeneous systems, the evolution of structural and dynamical properties of the water/sodium bis(2-ethylhexyl) sulfosuccinate (AOT) liquid crystals as a function of the molar ratio R (R=[water]/[AOT]) has been investigated by FT-IR spectroscopy and time domain reflectometry. The study emphasises how the progressive hydration of the surfactant head groups is mainly responsible for the structural and dynamical evolution of water/AOT liquid crystals. In particular, it has been found that the state of water at lower R values is strongly perturbed, bulk-like water appears only at R>23 and the water/AOT in…
ChemInform Abstract: In situ DRIFT Spectroscopic Investigation on the Chemical Evolution of Zinc Phosphate Acid-Base Cement.
2010
Diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy has been used to follow the chemical evolution of zinc phosphate acid−base cement (ZPC), which has been prepared from unmodified, as well as from aluminum- and zinc-modified orthophosphoric acid. For the first time, amorphous dizinc cyclotetraphosphate octahydrate, Zn2P4O12·8H2O, although hydrolytically instable, has been observed as precursor phase prior to crystallization of α-hopeite, α-Zn3(PO4)2·4H2O, in both systems. Within minutes from onset of mixing the infrared spectrum of unmodified ZPC is dominated by the characteristic vibrations of α-hopeite, due to matrix crystallization. Setting of modified ZPC is strongly af…
Layer-by-layer deposited multilayer assemblies of polyelectrolytes and proteins: from ultrathin films to protein arrays
2008
We have recently introduced a new method of creating ultrathin films of polyelectrolytes based on the electrostatic attraction between opposite charges. Multilayer assemblies are adsorbed in a layer-by-layer fashion from aqueous solutions of the polymers. The total film thickness can easily be adjusted by varying the ionic strength of the solution. Here, we report on the temperature stability and the water content of the multilayer assemblies. Furthermore, we have extended our concept to the incorporation of protein layers into films of synthetic polyelectrolytes. The well established system biotin/streptavidin was used to construct such multilayers, also by biospecific recognition. Adsorpt…
ChemInform Abstract: Eco-Friendly Functionalization of Natural Halloysite Clay Nanotube with Ionic Liquids by Microwave Irradiation for Suzuki Coupli…
2014
Abstract Microwave assisted halloysite (HNT) external surface functionalization with ionic liquids is described. HNTs modification was achieved in two steps: a) grafting of 3-mercaptopropyl trimethoxysilane on the external surface of HNT by a microwave irradiation; b) anchorage of vinylimidazolium ionic liquids by a thiol-ene reaction. MW irradiation allowed us to obtain high loading onto the HNT surface compared to those obtained through conventional synthesis. Fourier transform infrared spectroscopy and thermogravimetric analysis confirmed that the grafting has occurred only on the external surface of HNT. Turbidimetric and dynamic light scattering analyses showed that the introduction of…
Eco-friendly functionalization of natural halloysite clay nanotube with ionic liquids by microwave irradiation for Suzuki coupling reaction
2014
Abstract Microwave assisted halloysite (HNT) external surface functionalization with ionic liquids is described. HNTs modification was achieved in two steps: a) grafting of 3-mercaptopropyl trimethoxysilane on the external surface of HNT by a microwave irradiation; b) anchorage of vinylimidazolium ionic liquids by a thiol-ene reaction. MW irradiation allowed us to obtain high loading onto the HNT surface compared to those obtained through conventional synthesis. Fourier transform infrared spectroscopy and thermogravimetric analysis confirmed that the grafting has occurred only on the external surface of HNT. Turbidimetric and dynamic light scattering analyses showed that the introduction of…
Thermal degradation of highly crosslinked rigid PU-PIR foams based on high functionality tall oil polyol
2019
Abstract This study presents the development and analysis of rigid polyurethane-polyisocyanurate (PU-PIR) foam synthesized from high functionality tall oil (TO) based polyols. Three PU-PIR formulations with varied high functionality TO based polyol content (45, 75 and 95 pbw) and a different tier of isocyanate (NCO) indexes (110, 150, 200, 300 and 400) for each formulation were compared to a formulation developed using conventional raw materials, mainly obtained from petrochemicals. Using the Fourier transform infrared spectral analysis (FTIR), the chemical structure of the foams was evaluated with emphasis on the characteristic PU-PIR signal ratio and isocyanurate signal peaks. The thermal…
Dispersion of titanate nanotubes for nanomedicine: comparison of PEI and PEG nanohybrids.
2014
In the present study, we report the dispersion of titanate nanotubes (TiONts) via polymer grafting (PolyEthylene Glycol, PEG) or polymer adsorption (polyethylene imine, PEI) where different TiONts/polymer ratios have been investigated. The TiONts/PEI and TiONts/PEG nanohybrids were characterized by scanning and transmission electron microscopy as well as by zeta potential measurements in order to determine both their dispersion state and stability in water (at different pH for zetametry). The nature of the chemical bonds at the surface of these nanohybrids was investigated by Fourier-transformed infrared (FTIR) spectroscopy while the grafting densities of PEG on the nanotubes were quantifie…
The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA
2012
Abstract Silica–PMMA nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1–5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of PMMA was investigated by means of transmission electron microscopy (TEM), X-ray diffractometry (XRD), dynamic mechanical analysis (DMA), thermogravimetric analyses (TGA), Fourier-transform infrared spectroscopy (FTIR), 13 C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy ( 13 C{ 1 H} CP-MAS NMR) and measures of proton spin-lattice relaxation time in the rotating frame ( T 1 ρ ( H )), in the laboratory frame ( T 1 ( H )) a…
FT-IR spectroscopic investigation of bacterial cell envelopes from Zymomonas mobilis which have different surface hydrophobicities
2013
Abstract Changes in the cell envelope composition of bacteria Zymomonas mobilis 113S which resulted in varied cell surface hydrophobicity (CSH) were examined using FT-IR-spectroscopy and conventional methods of biochemical analysis. Significant differences in all analyses were detected between hydrophilic and hydrophobic compounds in the envelopes of Z. mobilis . A significant positive linear relationship ( P Z. mobilis and the ratio of absorbance band intensities assigned to the CH 2 and CH 3 vibrations from lipids as well as the asymmetric and symmetric stretching vibrations of these methylene and methyl groups. Differences were also seen between the ratio of band absorbances arising from…