Search results for "Fuel Technology"
showing 10 items of 323 documents
Insights into the catalytic production of hydrogen from propane in the presence of oxygen: Cooperative presence of vanadium and gold catalysts
2015
7 figures.-- © 2015. This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/
Trace compounds affecting biogas energy utilisation – A review
2011
Abstract This paper investigates the trace compounds affecting energy utilisation in biogas that come from different production sites. With biogas being more widely used in different energy applications more interest has arisen for the specific composition of biogas. In traditional energy applications, methane and hydrogen sulphide contents have had the most influence when energy utilisation application has been considered. With more advanced processes also the quantity and quality of trace compounds is more important. In regards to trace compounds, it was found that the concentrations and the variations of volatile organic compounds (VOCs) can be high in different landfills, especially, wi…
Full-scale biotrickling filtration of volatile organic compounds from air emission in wood-coating activities
2012
BACKGROUND: Biotrickling filtration could be considered as a suitable and viable technology for controlling the industrial emissions of volatile organic compounds (VOCs) in waste gases. In this study, the performance of a full-scale biotrickling system, including a passively activated carbon-smoothing prefilter was investigated for the treatment of exhaust gases from two different paint spray sources at a furniture facility. RESULTS: The VOC profiles were uneven for both sources, but the second source was more irregular, with highly variable VOC loads. The plant was operated at empty bed residence times (EBRTs) between 20 and 100 s. The system was able to control the VOC emissions, so air t…
NO formation tendency characterization for solid fuels in fluidized beds
2013
Abstract Usually the standard fuel analysis is not enough to allow for accurate NO emission predictions in large scale fluidized bed combustion. This paper presents NO formation tendency characterization results from novel laboratory measurements in a small-scale fluidized bed combustor. With the special two-stage oxidation method it is possible to eliminate the observed problems of unstable test conditions during rapid pyrolysis of high-volatile fuels in batch combustion. Experimental results of the conversion of fuel nitrogen to NO are presented for wide range of fuels, ranging from coal-type fuels to peat, biomasses and wastes. A NO formation tendency database is formed based on the resu…
Overview and Essentials of Biomass Gasification Technologies and Their Catalytic Cleaning Methods
2016
Obtaining a tar-free biosyngas from biomass gasification processes has been the subject of many studies in the past 2 decades, and it still remains the major technologic and economic challenge. Unfortunately, the countless publications about gasification technologies and different techniques permitting reduction of the tar present at the outlet of gasifier reactors usually confuse inexperienced persons who attempt to further research this subject. More than presenting the basis of biomass gasification technologies and positioning them among other bioenergies, this work mainly aims at reviewing and comparing the different methods developed in order to produce a tar-free biosyngas. In this wa…
Thermolytic reverse electrodialysis heat engine: model development, integration and performance analysis
2019
Abstract Salinity gradient heat engines represent an innovative and promising way to convert low-grade heat into electricity by employing salinity gradient technology in a closed-loop configuration. Among the aqueous solutions which can be used as working fluid, ammonium bicarbonate-water solutions appear very promising due to their capability to decompose at low temperature. In this work, an experimentally validated model for a reverse electrodialysis heat engine fed with ammonium bicarbonate-water solutions was developed. The model consists of two validated sub-models purposely integrated, one for the reverse electrodialysis unit and the other for the stripping/absorption regeneration uni…
A COMPARISON BETWEEN COMBUSTION PHASE INDICATORS FOR OPTIMAL SPARK TIMING
2008
The closed-loop control of internal combustion engine spark timing may be accomplished by means of a combustion phase indicator, i.e., a parameter, derived from in-cylinder pressure analysis, whose variation is mainly referable to combustion phase shift and assumes a fixed reference value under optimal spark timing operation. The aim of the present work is a comparison between different combustion phase indicators, focusing on the performance attainable by a feedback spark timing control, which uses the indicator as pilot variable. An extensive experimental investigation has been carried out, verifying the relationship between indicators’ optimal values and the main engine running parameter…
Adsorption of hydrogen isotopes in the zeolite NaX: Experiments and simulations
2017
Abstract Among the different methods to separate hydrogen isotopes one is based on the physisorption at low temperature (below 100 K) where quantum effects induce a particular behavior. In the present work, we study the adsorption of single H 2 and D 2 on the zeolite NaX by combining experiments (manometry) from 30 to 150 K and molecular dynamics simulations at 40 and 77 K. Simulations also include the adsorption analysis for T 2 . Adsorption on NaX membranes is simulated and quantum corrections are introduced by using the well-known Feynman–Hibbs approach into the interaction potentials. Experimental adsorption isotherms are reproduced by using the Toth equation and it is shown that the ad…
Influence of Elevated Pressure on the Torrefaction of Wood
2016
The use of pressurized reactors in industrial processes can improve efficiency and economics. Torrefaction is a partial pyrolysis of lignocellulosic biomass designed to result in a solid product with improved fuel properties for utilization in combustion and gasification. In this work, the influence of elevated pressure on the torrefaction of wood has been investigated. Wood samples were torrefied using a pressurized thermogravimetric reactor (PTGR) with pressures of 0.1 to 2.1 MPa. The results indicate that reactor pressure, particle size of feedstock, and wood species are all factors in torrefaction yield improvements. Torrefaction at 2.1 MPa pressure improved the higher heating value (ca…
Isolation of soil lignins by combination of ball-milling and cellulolysis: Evaluation of purity and isolation efficiency with pyrolysis/GC/MS
2009
Abstract CuO oxidation is traditionally used for soil lignin study, although, like other degradation methods it might give access only to a part of the lignin polymers. For structural characterization, lignins are conventionally isolated from plant material by combining ball-milling, cellulolysis and solvent extraction to recover a milled wall enzymatic lignin (MWEL) fraction. This method might isolate condensed lignins, which are not accounted for CuO oxidation. MWELs are still associated with polysaccharides. This study aimed to evaluate if the MWEL method can be used complementary to CuO oxidation for soil lignin studies. We assessed the purity of isolated lignins by pyrolytic characteri…