Search results for "GLASS"
showing 10 items of 1153 documents
Tellurites fibers for infrared supercontinuum sources : opto-geometric profiles and extrinsic absorptions management
2016
This PhD thesis work focuses on the synthesis and purification of vitreous materials used for the development of waveguides with varied profiles, dedicated to supercontinuum (SC) generation between 1 and 5 μm.Concerning the purification of tellurite glasses, several leads were followed, but best results are obtained for the purification of the TeO2-ZnO-Na2O glassy system by the means of zinc fluoride. Attenuation measurements performed on several meter-long single-index fiber samples reveal the nearly complete elimination of water-related absorptions between 3 and 4 μm (OH ions concentration lower than 1 ppm mass.). Such water-purified glasses were firstly dedicated to microstructured optic…
Fibres optiques à coeur supendu en verre d'oxyde de tellure et génération d'effets non linéaires dans l'infrarouge au-delà de 2 microns
2012
The work reported in this thesis deals with the fabrication of suspended core tellurite microstructured optical fibers (MOFs) for supercontinuum generation beyond 2 µm. In order to reach our aim, we first studied thermal and optical properties of TeO2-ZnO-R2O and TeO2-WO3-R2O (where R = Li, Na and K) glasses. The glass 80TeO2-10ZnO-10Na2O (molar %) has been chosen in order to make MOFs for characterization of the generated non linear optical effects. Synthesis performed under dry and oxidative atmosphere allowed us to reduce the hydroxyl groups concentration by a factor of 30 compared to fabrication in air atmosphere. Use of dehydrating agents (ZnF2 and TeCl4) allowed to reduce again the OH…
Remineralization effects of conventional and experimental ion-releasing materials in chemically or bacterially-induced dentin caries lesions
2019
Abstract Objectives The aim of this study was to evaluate the remineralization effects of conventional and experimental ion-releasing materials on different artificial dentin carious lesions. Methods Forty human dentin discs were submitted to different demineralization protocols for simulated caries lesion: (D1) Shallow chemically-induced caries, (D2) deep chemically-induced caries, (D3) deep bacterially-induced caries. Each disc was divided in five parts; one of those served as baseline control. The remaining parts of each disc (n = 12–16/group) were treated using the following materials: EXP, an experimental resin-based bioactive material consisting of a self-etch primer and an adhesive c…
Microleakage comparison of glass-ionomer and white mineral trioxide aggregate used as a coronal barrier in nonvital bleaching
2011
Objectives: There is some evidence that the pH at the root surface is reduced by intracoronal placement of bleaching pastes, which is known to enhance osteoclastic activity. Therefore, it is recommended that a protective barrier be used over the canal filling to prevent leakage of bleaching agents. Glass-ionomer (GI) is commonly used as a coronal barrier before nonvital bleaching. Because mineral trioxide aggregate (MTA) creates high alkalinity after mixing with water, using MTA as a protective barrier over the canal filling may not only prevent leakage of bleaching agents and microorganisms, but may prevent cervical resorption. The aim of this study was to evaluate sealing ability of white…
Bioactive glass ions as strong enhancers of osteogenic differentiation in human adipose stem cells.
2015
Bioactive glasses are known for their ability to induce osteogenic differentiation of stem cells. To elucidate the mechanism of the osteoinductivity in more detail, we studied whether ionic extracts prepared from a commercial glass S53P4 and from three experimental glasses (2-06, 1-06 and 3-06) are alone sufficient to induce osteogenic differentiation of human adipose stem cells. Cells were cultured using basic medium or osteogenic medium as extract basis. Our results indicate that cells stay viable in all the glass extracts for the whole culturing period, 14 days. At 14 days the mineralization in osteogenic medium extracts was excessive compared to the control. Parallel to the increased mi…
A laboratory comparison of Individual Targis/Vectris posts with standard fiberglass posts
2007
This article presents an in vitro analysis of a specific occlusal loading test on endodontically treated teeth restored with 2 different composite post materials. Individual, customized posts (IFPs) were compared to standard fiberglass posts (SFPs). The selected IFPs (standard cylindric Targis/Vectris posts) were compared to SFPs (Conic 6% Post, Ghimas). The posts were first subjected to a 3-point bending test to compare their flexural elastic properties. They were then used to restore 22 endodontically treated artificial maxillary central incisors and subjected to a specific occlusal loading simulation test. The loading test showed that IFP restorations performed better than SFP restoratio…
Optical properties of in-vitro biomineralised silica
2012
Silicon is the second most common element on the Earth's crust and its oxide (SiO(2)) the most abundant mineral. Silica and silicates are widely used in medicine and industry as well as in micro- and nano-optics and electronics. However, the fabrication of glass fibres and components requires high temperature and non-physiological conditions, in contrast to biosilica structures in animals and plants. Here, we show for the first time the use of recombinant silicatein-α, the most abundant subunit of sponge proteins catalyzing biosilicification reactions, to direct the formation of optical waveguides in-vitro through soft microlithography. The artificial biosilica fibres mimic the natural spon…
Evaluation of drug-polymer solubility curves through formal statistical analysis: comparison of preparation techniques.
2014
ABSTRACT: In this study, the influence of the preparation technique (ball milling, spray drying, and film casting) of a supersaturated amorphous dispersion on the quality of solubility determinations of indomethacin in polyvinylpyrrolidone was investigated by means of statistical analysis. After annealing of the amorphous dispersions above the crystallization temperature for 2 h, the solubility curve was derived from the glass transition temperature of the demixed material using the Gordon–Taylor relationship and fitting with the Flory–Huggins model. The study showed that the predicted solubility from the ball-milled mixtures was not consistent with those from spray drying and film casting,…
Channel Formation and Intermediate Range Order in Sodium Silicate Melts and Glasses
2004
We use inelastic neutron scattering and molecular dynamics simulation to investigate the interplay between the structure and the fast sodium ion diffusion in various sodium silicates. With increasing temperature and decreasing density the structure factors exhibit an emerging prepeak around 0.9 A^-1. We show, that this prepeak has its origin in the formation of sodium rich channels in the static structure. The channels serve as preferential ion conducting pathways in the relative immobile Si-O matrix. On cooling below the glass transition this intermediate range order is frozen in.
Solubility of NH3 and apparent pK of NH4+ in human plasma, isotonic salt solutions and water at 37 degrees C.
1998
The solubility of ammonia, alphaNH3 (mM/mmHg), was determined at 37 degrees C and low ammonia partial pressure (0.02-1 mmHg) in pure water (n =24) as 46.70+/-0.40; aqueous isotonic salt solutions (n = 7) as 46.8+/-0.81; and human plasma (n = 5) as 42.0+/-0.66. The last figure increases to 45.3+/-0.63 if expressed in molal units (mmol/kg plasma water x mmHg) instead of molarity with respect to the water content of the plasma (mean from four healthy and fasting donors: 0.908+0.005 kg H2O/kg plasma; mean density at 37 degrees C: 1.020+/-0.002 kg/l). In pure water, the solubility value is the mean of three different methods: (a) extrapolation of the salting-out effect of ammonia in aqueous NaOH…