Search results for "GRADE"
showing 10 items of 695 documents
Time-domain fiber laser hydrogen sensor.
2004
We report a novel scheme for a fiber-optic hydrogen sensor based on an erbium-doped fiber laser with a palladium-coated tapered fiber within the laser cavity. The tapered fiber acts as a hydrogen-sensing element. When the sensing element is exposed to a hydrogen atmosphere, its attenuation decreases, changing the cavity losses and leading to a modification of the laser transient. The hydrogen concentration is obtained by simple measurement of the buildup time of the laser. This technique translates the measurement of hydrogen concentration into the time domain, and it can be extended to many intensity-based fiber sensors. Relative variations in the buildup time of up to 55% at an increase o…
Experimental analysis of distributed pump absorption and refractive index changes in Yb-doped fibers using acousto-optic interaction.
2015
In-fiber acousto-optic interaction is used to characterize the refractive index changes at the C band in a single-mode ytterbium-doped optical fiber under 980 nm pumping. The transmission notch created by the acoustic-induced coupling between the core mode and a cladding mode shifts to longer wavelengths when the pump is delivered to the fiber. The electronic contribution to the refractive index change is quantified from the wavelength shift. Using a time-resolved acousto-optic method, we investigate the distribution of pump absorption, and the resulting refractive index change profile, along sections of ytterbium-doped fiber exceeding 1 m long under different pump power levels.
Ultrahigh-birefringent squeezed lattice photonic crystal fiber with rotated elliptical air holes.
2010
We report an experimental realization of a highly birefringent photonic crystal fiber as a result of compressing a regular hexagonal structure. The experimental measurements estimate a group birefringence of approximately 5.5x10(-3) at 1550 nm in good agreement with the numerical results. We study the influence of compressing the regular structure at different directions and magnifications, obtaining a method to realistically enhance the phase birefringence while moderating the group birefringence.
Theory of parabolic pulse propagation in nonlinear dispersion decreasing optical fiber amplifiers
2008
Optical fibers ; Nonlinear optics ; Optical fiber amplifiers ; Optical amplifier ; Optical solitons ; Electromagnetic wave propagation ; Pulse propagation ;; International audience; We show that pulse spectral broadening in normally dispersive nonlinear fiber amplifiers may be enhanced by introducing a suitable dispersion tapering. We obtain an analytical dispersion profile that permits one to reduce pulse propagation in a varying dispersion fiber to the case of an equivalent fiber with constant parameters.
High frequency microwave signal generation using dual-wavelength emission of cascaded DFB fiber lasers with wavelength spacing tunability
2010
[EN] A dual wavelength fiber laser source based on two cascaded phase-shifted fiber Bragg gratings is presented The gratings are written in an erbium-doped fiber each configuring the cavity of a distributed feedback fiber laser The spacing between lasing modes is controlled dynamically by the use of piezoelectric actuators A continuous tuning range of 5-724 pm of the wavelength difference which is equivalent to a photodetected 072-92 GHz range is obtained Efficient generation from the L to the W microwave and millimeter bands has been achieved by heterodyne photodetection of the dual-wavelength optical signal (C) 2010 Elsevier BV All rights reserved
PLA-based functionally graded laminates for tunable controlled release of carvacrol obtained by combining electrospinning with solvent casting
2020
Abstract A novel approach was designed to fabricate high-added value manufacts, starting from cost-effective materials and combining well-known processing techniques. Bi- and three-layered, functionally graded laminates were achieved by direct electrospinning onto dense substrates. The architecture of each multilayer comprises a dense layer formed by solvent casting, which is constituted by polylactic acid (PLA) and carvacrol, and one or two electrospun fibrous skin layers, consisting of PLA only. Processing-structure-properties relationships of such materials were investigated. As regards mechanical behavior, the amount of fibrous PLA layers determined an increase of stiffness from 20 to 3…
Additive Manufacturing of Multi‐Scale Porous Soft Tissue Implants That Encourage Vascularization and Tissue Ingrowth
2021
Medical devices, such as silicone-based prostheses designed for soft tissue implantation, often induce a suboptimal foreign-body response which results in a hardened avascular fibrotic capsule around the device, often leading to patient discomfort or implant failure. Here, it is proposed that additive manufacturing techniques can be used to deposit durable coatings with multiscale porosity on soft tissue implant surfaces to promote optimal tissue integration. Specifically, the “liquid rope coil effect”, is exploited via direct ink writing, to create a controlled macro open-pore architecture, including over highly curved surfaces, while adapting atomizing spray deposition of a silicone ink t…
Development of polymeric functionally graded scaffolds: a brief review.
2016
Over recent years, there has been a growing interest in multilayer scaffolds fabrication approaches. In fact, functionally graded scaffolds (FGSs) provide biological and mechanical functions potentially similar to those of native tissues. Based on the final application of the scaffold, there are different properties (physical, mechanical, biochemical, etc.) which need to gradually change in space. Therefore, a number of different technologies have been investigated, and often combined, to customize each region of the scaffolds as much as possible, aiming at achieving the best regenerative performance. In general, FGSs can be categorized as bilayered or multilayered, depending on the number…
Parabolic pulse generation with active or passive dispersion decreasing optical fibers
2007
International audience; We experimentally demonstrate the possibility to generate parabolic pulses via a single dispersion decreasing optical fiber with normal dispersion. We numerically and experimentally investigate the influence of the dispersion profile, and we show that a hybrid configuration combining dispersion decrease and gain has several benefits on the parabolic generated pulses.
Guiding properties of a photonic quasi-crystal fiber based on the thue-morse sequence
2015
We present a novel microstructured optical fiber having a quasi-periodic distribution of air holes based on the Thue–Morse sequence. The transverse section of these fibers is basically a two-dimensional photonic quasi-crystal that can also provide complete photonic bandgaps without being a perfect periodic structure. Like in the conventional photonic crystal fibers, if the quasi-periodicity is broken by decreasing the size of some air holes or by introducing an extra air hole, the modified holes become defects that localize and guide light along the fiber. The guidance is attributed to the inhibition of transverse radiation produced by the photonic quasi-crystal cladding. Dispersion curves …