Search results for "GRAPHENE"
showing 10 items of 496 documents
Biopolymer based nanocomposites reinforced with graphene nanoplatelets
2016
In this work, biopolymer based nanocomposites filled with graphene nanoplatelets (GnP) were prepared by melt compounding in a batch mixer. The polymer used as matrix was a commercial biodegradable polymer-blend of PLA and a copolyester (BioFlex®). The prepared materials were characterized by scanning electron microscopy (SEM), rheological and mechanical measurements. Moreover, the effect of the GnP amount on the investigated properties was evaluated. The results indicated that the incorporation of GnP increased the stiffness of the biopolymeric matrix.
Light-Fueled, Spatiotemporal Modulation of Mechanical Properties and Rapid Self-Healing of Graphene-Doped Supramolecular Elastomers
2017
Gaining spatially resolved control over the mechanical properties of materials in a remote, programmable, and fast-responding way is a great challenge toward the design of adaptive structural and functional materials. Reversible, temperature-sensitive systems, such as polymers equipped with supramolecular units, are a good model system to gain detailed information and target large-scale property changes by exploiting reversible crosslinking scenarios. Here, it is demonstrated that coassembled elastomers based on polyglycidols functionalized with complementary cyanuric acid and diaminotriazine hydrogen bonding couples can be remotely modulated in their mechanical properties by spatially conf…
Effect of the elongational flow on morphology and properties of polypropylene/graphene nanoplatelets nanocomposites
2018
Abstract In this work the effect of the presence of graphene nanoplatelets (GnP) on the morphology and mechanical properties of polypropylene/GnP nanocomposites has been investigated when these polymer systems are subjected to non-isothermal elongational flow in a melt spinning operation. The presence of the GnP magnifies the effect of the elongational flow. Indeed, the elastic modulus and the tensile strength of nanocomposites increases with the orientation more than that observed for the pure matrix. Moreover, the elongation at break increases at low values of the draw ratio for the nanocomposites, while, the matrix shows the expected decrease in deformability. These effects have been cor…
Carbon-based ionic liquid gels: alternative adsorbents for pharmaceutically active compounds in wastewater
2021
With the aim of obtaining adsorbent systems to be used for the removal of pharmaceutically active compounds (PhACs) from wastewater, some hybrid ionic liquid gels (HILGs) were obtained from the combination of ionic liquid-based supramolecular gels and carbon materials, like graphite, graphene and graphene oxide (graphene OX). The properties of HILGs were investigated by determining their gel–sol transition temperature and rheological features. They were tested for the removal of PhACs belonging to different pharmaceutical classes, like antibiotics, antidepressants, anti-inflammatory. In particular, the removal of carbamazepine (CBZ), diclofenac sodium salt (DCF), ciprofloxacin (CPX) and nal…
Synthesis and characterization of bisulfonated poly(vinyl alcohol)/graphene oxide composite membranes with improved proton exchange capabilities
2020
Abstract Composite membranes based on poly(vinyl alcohol) (PVA) and graphene oxide (GO) were prepared by solution-casting method to be used as proton exchange membranes (PEMs) in fuel cell (FC) applications. Bisulfonation was employed as a strategy to enhance the proton conductivity of these membranes. First, a direct sulfonation of the polymer matrix was accomplished by intra-sulfonation of the polymer matrix with propane sultone, followed by the inter-sulfonation of the polymer chains using sulfosuccinic acid (SSA) as a crosslinking agent. Furthermore, the addition of graphene oxide (GO) as inorganic filler was also evaluated to enhance the proton-conducting of the composite membranes. Th…
Non-covalent graphene nanobuds from mono- and tripodal binding motifs.
2017
Graphene nanobuds were prepared via the non-covalent anchoring of C60-based molecules endowed with one or three pyrene units, respectively. TGA, FTIR, UV-Vis and TEM investigations confirmed the formation of nanohybrids. For the two molecular derivatives, striking differences were determined in their interaction with graphene or carbon surfaces by Raman, cyclic voltammetry and molecular mechanics calculations, revealing the important role of pyrene adsorption in modulating the electronic properties of the nanohybrids.
Mechanical Detection of the De Haas–van Alphen Effect in Graphene
2022
Funding Information: We thank V. Falko, M. Kumar, and S. Paraoanu for useful discussions. This work was supported by the Academy of Finland projects 314448 (BOLOSE) and 336813 (CoE, Quantum Technology Finland) as well as by ERC (grant no. 670743). The research leading to these results has received funding from the European Unions Horizon 2020 Research and Innovation Programme, under Grant Agreement no 824109, and the experimental work benefited from the Aalto University OtaNano/LTL infrastructure. A.L. is grateful to Osk. Huttunen foundation for a scholarship. J.M. thanks the Väisälä Foundation of the Finnish Academy of Science and Letters for support. F.M. acknowledges financial support fr…
$PT$-symmetric graphene under a magnetic field
2016
We propose a $PT$-symmetrically deformed version of the graphene tight-binding model under a magnetic field. We analyze the structure of the spectra and the eigenvectors of the Hamiltonians around the $K$ and $K'$ points, both in the $PT$-symmetric and $PT$-broken regions. In particular we show that the presence of the deformation parameter $V$ produces several interesting consequences, including the asymmetry of the zero-energy states of the Hamiltonians and the breakdown of the completeness of the eigenvector sets. We also discuss the biorthogonality of the eigenvectors, which {turns out to be} different in the $PT$-symmetric and $PT$-broken regions.
Synthesis and self-assembly of a PEGylated-graphene aerogel
2016
Abstract In the frame of this work, we present, for the first time, the synthesis and self-assembly of an aerogel built by graphene oxide-polyethylene glycol. The synthetic route involves at first the coupling of GO with an amino-terminated polyethylene glycol sample by carbodiimide in aqueous environment, and the subsequent conversion of the hydrogel achieved into an aerogel via freeze-drying. The 3D PEGylated graphene-based aerogel, characterized by spectroscopic, morphological, structural and mechanical analyses, displays an ultralight and highly porous (99.7%) network and possesses high mechanical properties together with a good biocompatibility.
Atomically Precise Distorted Nanographenes: The Effect of Different Edge Functionalization on the Photophysical Properties down to the Femtosecond Sc…
2023
Nanographenes (NGs) have been attracting widespread interest since they combine peculiar properties of graphene with molecular features, such as bright visible photoluminescence. However, our understanding of the fundamental properties of NGs is still hampered by the high degree of heterogeneity usually characterizing most of these materials. In this context, NGs obtained by atomically precise synthesis routes represent optimal benchmarks to unambiguously relate their properties to well-defined structures. Here we investigate in deep detail the optical response of three curved hexa-peri-hexabenzocoronene (HBC) derivatives obtained by atomically precise synthesis routes. They are constituted…