Search results for "GST"
showing 10 items of 874 documents
Metal Matrix Composites - Mmc - Turning: Comparison of Tool Materials
2002
The main properties required to the modem cutting tools to be employed in production, are both high wear resistance and chemical stability. In this last years, in the machining of MMCs several kinds of coated tools have been developed; they are characterized by high hardness to resist to the relevant strength and abrasive action of the reinforce fibers or particles, arranged inside the matrix. In turning of MMC the employ of Tungsten Carbide tools coated with Polycrystalline Diamond (PCD) have shown to be very effective, whereas they are very expensive thus increasing the production costs.
Influence of the focusing effect on XAFS in ReO3, WO3−x and FeF3
1995
Abstract The role of the focusing effect in the formation of X-ray absorption fine structure (XAFS) is considered for ReO3, non-stoichiometric tungsten oxides WO3−x and FeF3 having the perovskite-type structure. Two cases are mainly discussed: (1) an admixture of rhenium and tungsten L2-edge XAFS in ReO3 and WO3−x crystals to the one above rhenium and tungsten L1-edge and (2) high-order superfocusing effect in Fe0F1Fe2F3Fe4 atomic chain in iron K-edge XAFS of FeF3 which is analysed using an ab initio multiple-scattering approach.
Laser irradiation of carbon–tungsten materials
2014
Carbon–tungsten layers deposited on graphite by thermionic vacuum arc (TVA) were directly irradiated with a femtosecond terawatt laser. The morphological and structural changes produced in the irradiated area by different numbers of pulses were systematically explored, both along the spots and in their depths. Although micro-Raman and Synchrotron-x-ray diffraction investigations have shown no carbide formation, they have shown the unexpected presence of embedded nano-diamonds in the areas irradiated with high fluencies. Scanning electron microscopy images show a cumulative effect of the laser pulses on the morphology through the ablation process. The micro-Raman spatial mapping signalled an…
Barium depletion study on impregnated cathodes and lifetime prediction
2003
In the thermionic cathodes used in cathode ray-tubes (CRTs), barium is the key element for the electronic emission. In the case of the dispenser cathodes made of a porous tungsten pellet impregnated with Ba, Ca aluminates, the evaporation of Ba determines the cathode lifetime with respect to emission performance in the CRT. The Ba evaporation results in progressive depletion of the impregnating material inside the pellet. In the present work, the Ba depletion with time has been extensively characterized over a large range of cathode temperature. Calculations using the depletion data allowed modeling of the depletion as a function of key parameters. The link between measured depletion and em…
Structural and electrical properties of cerium tungstate: Application to methane conversion
2020
International audience; The catalytic efficiency as well as the electrical conduction mechanism of Ce2(WO4)3 powders synthetized for the oxidation of methane were investigated. Total and partial oxidation reactions were observed in the temperature range between 600 and 750 °C under CH4/dry air flux, for low CH4 concentrations. The electrical conduction mechanism is based on electron tunneling at low temperature (< 650 °C) and hopping over an ion barrier at high temperature, which favors the catalytic oxidation of CH4 in air; these mechanisms occur during the partial and total oxidation under weak gas flow. The occurrence of these types of conduction mechanism was related both to the distort…
Redox reactions in the Pt/TiO2–WO3/SiO2 planar system
2014
Abstract The thermal behavior of the titanium–tungsten adhesive layer (30–70 at.%) deposited on a SiO2 substrate followed by a thicker Pt layer was investigated. The resulting Pt/TiW/SiO2 planar system was annealed under air or vacuum. Morphological and chemical characterizations at different stages of the annealing, as a function of several parameters such as treatment atmosphere, annealing temperature and thickness of the Pt film were performed through surface science analyses. When annealing under air, even at mild temperature (773 K), the whole interlayer oxidizes while a low amount of tungsten diffuses through platinum film. This phenomenon is related to tungsten oxidation which acts a…
Reversible oxidation of WOx and MoOx nano phases
2012
International audience; WOx and MoOx nano phases were prepared on TiO2(1 1 0) surfaces by a CVD procedure consisting of adsorption and decomposition of W(CO)(6) or Mo(CO)(6) precursors followed by annealing under UHV. Metal amount involved in each elaborated sample is in the fractional range from 0.1 to 0.35 equivalent monolayer (eqML) of W or Mo. Evolution of sample stoichiometry as a function of subsequent treatment is followed by valence band and core level photoemission as well as work function measurement. In each case, exposure of samples to molecular oxygen at room temperature induces an increase of sample work function in a range of several tenth of eV. Such a work function change i…
Photoelectrochemical removal of chlorfenvinphos by using WO3 nanorods: Influence of annealing temperature and operation pH
2019
[EN] A visible-light driven photoelectrochemical degradation process has been applied to a solution polluted with the organophosphate insecticide chlorfenvinphos. Different WO3 nanosheets/nanorods have been used as photoanodes. These nanostructured electrodes have been fabricated by anodization of tungsten and, subsequently, they have been subjected to a thermal treatment (annealing). The combined influence of annealing temperature (400¿°C and 600¿°C) and operation pH (1 and 3) on the photoelectrocatalytic behavior of these nanorods has been examined through a statistical analysis. Morphological, structural and photoelectrochemical characterizations have also been carried out. The chlorfenv…
Anodic oxide films on tungsten—I. The influence of anodizing parameters on charging curves and film composition
1980
Abstract The formation of anodic films on tungsten has been studied in 1N solutions of H 2 PO 4 , H 2 SO 4 , HNO 3 , HClO 4 and HCl at different temperatures. The shape of the anodic charging curves depends on the electrolyte composition and on the temperature. The chemical composition of the films is strongly influenced by the working temperature. The first step of the anodization is the formation of a barrier film of amorphous WO 3 . The thickening of the oxide layer occurs on account of the WO 3 dissolution and following precipitation of sparingly soluble oxides on the electrode surface.
Anodic oxide films on tungsten—II. The morphology and dissolution of the films
1980
Abstract Scanning electron microscopy was used to investigate the morphology of anodic oxide films on tungsten, obtained in various conditions of anodization. Studies were made of the growth of porous films, whose thickness increases with time and depends upon the current density. Temperature and electrolyte composition influence the film morphology. Gravimetric measurements of film dissolution at 70°C show that after a transient time, the rate of metal dissolution and that of film formation coincide. The porous films thicken because tungsten dissolves as WO 2 2+ and precipitates as WO 3 .H 2 O.