Search results for "Gas sensor"
showing 10 items of 43 documents
Conducting Polymers for Ammonia Sensing: Electrodeposition, Hybrid Materials and Heterojunctions
2017
International audience; Polyaniline (PANI) with electrodonating and electrowithdrawing substituents were electrodeposited and studied as sensing materials in resistors and heterojunctions. Whereas the dimethoxyaniline leads to a highly conductive material, the tetrafluoroaniline leads to a poor conducting polymer. However, this latter was used in heterojunctions, associated with a highly conductive material, the lutetium bisphthalocyanine LuPc2. Elsewhere, hybrid materials combining polypyrrole (PPy) with ionic macrocycles as counterions were also electrosynthesized and used as sensing material in resistors, for the detection of ammonia. They exhibit a higher sensitivity compared to PPy pre…
The lower rather than higher density charge carrier determines the NH 3 -sensing nature and sensitivity of ambipolar organic semiconductors
2018
International audience; Despite the extensive studies and great application potentials, the sensing nature of ambipolar organic semiconductor gas sensors still remains unclarified, unlike their inorganic counterparts. Herein, different numbers of thiophenoxy groups are introduced into the phthalocyanine periphery of bis(phthalocyaninato) rare earth semiconductors to continuously tune their HOMO and LUMO energies, resulting in the ambipolar M[Pc(SPh)(8)](2) [M = Eu (1), Ho (2)] and p-type M(Pc)[Pc(SPh)(8)] [M = Eu (3), Ho (4)]. An OFET in combination with direct I-V measurements over the devices from the self-assembled nanostructures of 1-4 revealed the original electron and hole densities (…
Ratiocalc: Software for processing data from multicomponent volcanic gas analyzers
2015
Portable gas analyzers have become a powerful tool for the real-time monitoring of volcanic gas composition over the last decade. Gas analyzers make it possible to retrieve in real-time the chemical composition of a fumarole system or a plume in an open-conduit volcano via periodic field-deployments or at permanent stations. The core of a multicomponent volcanic gas analyzer (MultiGAS) consists of spectroscopic and electrochemical sensors that are used to determine the concentrations of the most abundant volcanic gases (H2O, CO2, SO2, H2S, H2, CO and HCl) in a diluted plume and their mutual molar ratios. Processing such data is often difficult due to the high sensitivity of the sensors to e…
A Novel Gas Sensor Transducer Based on Phthalocyanine Heterojunction Devices
2007
Abstract: Experimental data concerning the changes in the current-voltage (I-V) perfor-mances of a molecular material-based heterojunction consisting of hexadecafluorinated nickel phthalocyanine (Ni(F 16 Pc)) and nickel phthalocyanine (NiPc), (Au|Ni(F 16 Pc)|NiPc|Al) are introduced as an unprecedented principle of transduction for gas sensing performances. The respective n - and p -type doped-insulator behaviors of the respective materials are supported, owing to the observed changes in surface potential (using the Kelvin probe method) after submission to electron donor (ammonia) and electron acceptor gases (ozone). On the other hand, the bilayer device exhibits strong variations in the bui…
Copper nanowire array as highly selective electrochemical sensor of nitrate ions in water
2020
Contamination of water with nitrate ions is a significant problem that affects many areas of the world. The danger from nitrates is not so much their toxicity, rather low, as their transformation into nitrites and in particular into nitrosamines, substances considered to be a possible carcinogenic risk. For this reason, European legislation has set the maximum permissible concentration of nitrates in drinking water at 44 mg/l. Thus, it is clear that a continuous monitoring of nitrate ions is of high technological interest but it must be rapid, easy to perform and directly performed in situ. Electrochemical detection is certainly among the best techniques to obtain the above requirements. In…
Development of the microwave transduction applied to ammonia detection : from nanomaterials to broadband sensor, understanding of the mechanisms and …
2017
The main objective of this thesis is to propose an analysis of the microwave transduction specificities in the framework of ammonia sensing applications. The two main features of this transduction are its broadband characterization (1 to 8 GHz) as well as its sensitive materials (dielectrics). This transduction method is based on the interaction between a polluting gas and a sensitive material deposited on the surface of a microwave-specific propagating structure. The response of the sensor is not directly induced by the dielectric properties of the gaseous target molecule, but rather by those of the target species adsorbed on the surface of the sensitive material. This adsorption causes a …
Selectivity improvement of semi-conducting gas sensors by selective filter for atmospheric pollutants detection
2006
International audience; The monitoring of atmospheric pollution using chemical gas sensors is a challenge due to the lack of selectivity of most existing devices. However, their performances can be improved using filtering films achieving the separation or the removal of some gases. This study is focused on the detection of carbon monoxide and of oxidant pollutants (nitrogen dioxide and ozone) by sensors constituted of SnO2, or phthalocyanine compounds. Two types of filters were investigated. Filters based on MnO2 powder are successful to remove ozone while preserving nitrogen dioxide in a large temperature range from ambient to 400 -C, but they partially convert carbon monoxide. The second…
ZnO/polyaniline composite based photoluminescence sensor for the determination of acetic acid vapor
2020
In this study, we report a novel ZnO/polyaniline (PANI) nanocomposite optical gas sensor for the determination of acetic acid at room temperatures. ZnO nanorods, synthesized in powder form were coated by PANI (ZnO/ PANI) by chemical polymerization method. The obtained nanocomposites were deposited on glass substrate and dried overnight at room temperature. Structure and optical properties of ZnO/PANI nanocomposite have been studied by using X-ray diffraction, transmission electron microscopy, scanning electron microscopy, diffuse reflectance and photoluminescence spectroscopy. Tests towards acetic acids were performed in the range of concentrations 1–13 ppm. The adsorption of acetic a…
A Comparative Study of Poly(Azure A) Film-Modified Disposable Electrodes for Electrocatalytic Oxidation of H₂O₂: Effect of Doping Anion.
2018
In the present paper, poly(azure A) (PAA) films were electrosynthetized in the presence of different doping anions on disposable screen-printed carbon electrodes (SPCEs). The anions used included inorganic monoatomic (chloride and fluoride), inorganic polyatomic (nitrate and sulfate) and organic polyatomic (dodecyl sulfate, DS) species. The coated electrodes thus obtained were characterized by electrochemical techniques and SEM. They showed improved electrocatalytic activities towards hydrogen peroxide oxidation compared to that of a bare SPCE. In particular, the insertion of DS anions inside PAA films provided a special sensitivity to the electrocatalysis of H2O2, which endowed these elect…
Overview on SNIFFPHONE:A portable device for disease diagnosis
2019
We present SNIFFPHONE, a handy and easy-To-use device that allows the non-invasive detection of gastric diseases. It analyzes the user's exhaled breath using specifically developed gas sensors. The device is coupled to a smartphone, which governs the breath analysis process, sends the data measurements to an external data analysis server, and finally gives feedback to the user. In this work, we describe the SNIFFPHONE device and the general platform under development.