Search results for "Gradation"

The effect of silica nanoparticles on the morphology, mechanical properties and thermal degradation kinetics of PMMA

2012

Abstract Silica–PMMA nanocomposites with different silica quantities were prepared by a melt compounding method. The effect of silica amount, in the range 1–5 wt.%, on the morphology, mechanical properties and thermal degradation kinetics of PMMA was investigated by means of transmission electron microscopy (TEM), X-ray diffractometry (XRD), dynamic mechanical analysis (DMA), thermogravimetric analyses (TGA), Fourier-transform infrared spectroscopy (FTIR), 13 C cross-polarization magic-angle spinning nuclear magnetic resonance spectroscopy ( 13 C{ 1 H} CP-MAS NMR) and measures of proton spin-lattice relaxation time in the rotating frame ( T 1 ρ ( H )), in the laboratory frame ( T 1 ( H )) a…

Studies on electron-beam irradiation and plastic deformation of medical-grade ultra-high molecular weight polyethylene

2011

Abstract Separated and combined electron-beam irradiation and plastic deformation effects on the structures of ultra-high molecular weight polyethylene (UHMWPE) were studied. It was found that the concentration of carbonyl (ketones, esters and peresters), hydroxyl and vinyl groups increases with the growing dose of adsorbed electrons. It also tends to exhibit a slight increase in the melting point and crystallinity of the samples. A mechanical stress in the polymer was found to accelerate radiation-induced degradation. It was concluded that each of the factors studied (i.e. electron beam sterilization and plastic deformation) had a different impact on the polymer structure. The change in th…

UV photocatalytic oxidation of paint solvent compounds in air using an annular TiO2-supported reactor

2010

BACKGROUND: One of the most important industrial sources of volatile organic compounds (VOCs) is related to coating and painting applications. In this sense, photocatalytic oxidation can become an innovative and promising alternative for the remediation of air polluted by VOCs. In this study the UV photodegradation of m-xylene, toluene and n-butyl acetate, as representative compounds of paint solvents, was carried out in an annular reactor using a TiO2–glass wool supported catalyst. RESULTS The removal of each component and their mixture, simulating an industrial emission, was evaluated under different operational conditions. A maximum elimination capacity of 12, 18 and 80 mg C m−3 s−1 was …

A new equipment to measure the combined effect of humidity, temperature, mechanical stress and UV exposure on the creep behaviour of polymers

2008

To be able to study and predict the physical properties of a polymeric material under different environmental conditions is very important. Moisture, UV irradiation, thermal and mechanical stresses can dramatically change the characteristics of the material and hinder some specific applications. In this work, a new equipment able to perform creep tests under different environmental conditions (temperature, humidity, stress) is presented. Some preliminary results are also presented using a sample of polyamide 6. As this polymer is sensitive to all these variables, it is appropriate to verify the effectiveness of the new instrument.

Thermo- and photo-oxidative stability and improved processability of polyamide stabilized with a new functional additive

2005

During processing polyamides can undergo thermo-mechanical degradation due to the mechanical stress and to the high temperature applied to the melt. Degradation can occur also during the polyamides lifetime due to many driving forces, like temperature, ultraviolet radiations, etc. The mechanisms of degradation are not well understood and the stabilization with usual stabilizers, like phenol antioxidants, is not so efficient as for other classes of polymers. The aim of this work is the study of the effects of the addition of a new multifunctional additive on the processing and on the thermo- and photo-stabilization of polyamide-6. This additive is able to prevent the thermo-mechanical degrad…

Metabolism of stilbene phytoalexins by Botrytis cinerea: 1. Characterization of a resveratrol dehydrodimer

1998

Abstract Resveratrol, a grapevine phytoalexin, is metabolized by a laccase-like stilbene-oxidase of Botrytis cinerea, the causal organism for grey mould. Characterization of one major metabolite formed during this degradation process as a resveratrol dehydrodimer allowed us to precize the reaction mechanism of this enzyme on stilbenes.

1982

Carbohydrates from Chemical Pulps: Characterization by Capillary Zone Electrophoresis

2006

Capillary zone electrophoresis (CZE) is one of the novel separation techniques, being applicable, for example, to virtually all important biomass-derived monosaccharides. However, in spite of this fact the utilization of this technique in the pulp and paper industry is currently rather limited. In this chapter practical guidance and some application examples are given to show how carbohydrate material (polysaccharides, oligosaccharides, and neutral and acidic monosaccharides) in pulps and spent liquors can be analyzed by CZE. Emphasis is placed on sample preparation and separation conditions including comparison with other separation methods, such as gas chromatography (GC) and high-perform…

Direct pyrolysis in the mass spectrometer of aromatic polysulfonates and polythiosulfonates

1978

The thermal degradation mechanism of three aromatic polysulfonates and polythiosulfonates was investigated by direct pyrolysis in the ion source of a mass spectrometer. Thermal degradation reactions were followed directly by this method by detecting the thermal and electron impact induced fragments. The results obtained have provided evidence that sulfur dioxide extrusion from the polymer backbone takes place in these polymers above 300°C. The synthesis and molecular characterization of the polymers studied are reported in the text.

Evaluation of a pilot-scale biotrickling filter as a VOC control technology for the plastic coating sector

2011

Abstract The performance and feasibility of a biotrickling filter (BTF) pilot unit for the treatment of exhaust gases from two robotic spray paint booths at a plastic coating facility were investigated. The volatile organic compound (VOC) concentrations in the emissions of the exhaust gases from the paint booths were relatively stable, although the VOC composition depended on the applied solvent-paint formulation in the booths. The pilot plant was operated for one year at empty bed residence times (EBRTs) ranging from 30 to 93 s. The performance of the system was affected by the solvent-paint formulations. An EBRT between 30 and 40 s was enough to meet legal requirements for products contai…