Search results for "Health monitoring"
showing 10 items of 66 documents
High-velocity Impact Location on Aircraft panels Using Macro-fiber Composite piezoelectric Rosettes
2010
In this article, an approach based on an array of macro-fiber composite (MFC) transducers arranged as rosettes is proposed for high-velocity impact location on isotropic and composite aircraft panels. Each rosette, using the directivity behavior of three MFC sensors, provides the direction of an incoming wave generated by the impact source as a principal strain angle. A minimum of two rosettes is sufficient to determine the impact location by intersecting the wave directions. The piezoelectric rosette approach is easier to implement than the well-known time-of-flight-based triangulation of acoustic emissions because it does not require knowledge of the wave speed in the material. Hence, th…
Effect of Motion Artifact on Digital Camera Based Heart Rate Measurement
2017
International audience; Depression is one of the most prevalent mental disorders, burdening many people world-wide. A system with the potential of serving as a decision support system is proposed, based on novel features extracted from facial expression geometry and speech, by interpreting non-verbal manifestations of depression. The proposed system has been tested both in gender independent and gender based modes, and with different fusion methods. The algorithms were evaluated for several combinations of parameters and classification schemes, on the dataset provided by the Audio/Visual Emotion Challenge of 2013 and 2014. The proposed framework achieved a precision of 94.8% for detecting p…
Smartphone-based bridge monitoring through vehicle-bridge interaction: analysis and experimental assessment
2022
AbstractIn this study, the results of a vast experimental campaign on the applicability of a smartphone-based technique for bridge monitoring are presented. Specifically, the vehicle–bridge interaction (VBI)-based approach is exploited as a cost-effective means to estimate the natural frequencies of bridges, with the final aim of possibly developing low-cost and diffused infrastructure monitoring system. The analysis is performed using a common hybrid vehicle, fully equipped with classical piezoelectric accelerometers and a smartphone MEMS accelerometer, to record its vertical accelerations while passing over the bridge. In this regard, the experimental campaign is carried out considering t…
An Innovative Structural Dynamic Identification Procedure Combining Time Domain OMA Technique and GA
2022
In this paper an innovative and simple Operational Modal Analysis (OMA) method for structural dynamic identification is proposed. It combines the recently introduced Time Domain–Analytical Signal Method (TD–ASM) with the Genetic Algorithm (GA). Specifically, TD–ASM is firstly employed to estimate a subspace of candidate modal parameters, and then the GA is used to identify the structural parameters minimizing the fitness value returned by an appropriately introduced objective function. Notably, this method can be used to estimate structural parameters even for high damping ratios, and it also allows one to identify the Power Spectral Density (PSD) of the structural excitat…
Global–local model for three-dimensional guided wave scattering with application to rail flaw detection
2021
This study presents a three-dimensional global–local formulation for the prediction of guided wave scattering from discontinuities (e.g. defects). The approach chosen utilizes the Semi-Analytical Finite Element method for the “global” portion of the waveguide, and a full Finite Element discretization for the “local” portion of the waveguide containing the discontinuity. The application of interest is the study of guided wave scattering from transverse head defects in rails. Theoretical scattering results are impossible to obtain in this case for a wide-frequency range. While three-dimensional Semi-Analytical Finite Element–Finite Element models for guided wave scattering studies have been …
Bio materials with reclaimed asphalt: from lab mixes properties to non-damaged full scale monitoring and mechanical simulation
2019
Three innovative environmentally friendly pavement materials, designed with 50% of Reclaimed Asphalt and three different biomaterials (2 bio-additivated bitumens and 1 bio-binder), were produced in an industrial plant. These mixes were tested in lab and also at full scale using an Accelerated Pavement Test facility. The asphalt mix viscoelastic properties were measured in lab and their intrinsic viscoelastic response were simulated. These rheological models are used to simulate the pavement mechanical response using both elastic and viscoelastic multilayer codes. Hence, full scale measurement performed during the full scale test at an early stage (without damages) can be compared with these…
Electromechanical Impedance Method to Assess the Stability of Dental Implants
2017
In this paper we illustrate the application of the electromechanical impedance (EMI) technique, popular in structural health monitoring, to assess the stability of dental implants. The technique consists of bonding a piezoelectric transducer to the element to be monitored. When subjected to an electric field, the transducer induces low to high frequency structural excitations which, in turn, affect the transducer's electrical admittance. As the structural vibrations depend on the mechanical impedance of the host structure (in this case the implant secured to the jaw), the measurement of the PZT's admittance can infer the progress of the osseointegration process. In the study presented in th…
Simultaneous measurement of temperature and strain in glass fiber/epoxy composites by embedded fiber optic sensors: I. Cure monitoring
2007
In this paper (Part I) the use of fiber optic sensors for real-time monitoring of the cure kinetics of GFRP composites is explored. The proposed sensing system allows the simultaneous measurement of both temperature and strain by monitoring the change in reflected wavelength from two coupled fiber Bragg grating (FBG) sensors that have been embedded into the composite laminate. Instrumented GFRP laminates with 12, 18 and 24 reinforcing plies, respectively, were prepared by means of the vacuum bagging technique. Samples were cured in a thermally controlled oven at 80 degrees C and 30 kPa for 240 min (isothermal stage) and then cooled down to ambient temperature by turning off the heating sour…
Numerical analysis of a piezoelectric structural health monitoring system for composite flange-skin delamination detection
2013
Abstract In this paper, a piezoelectric based Structural Health Monitoring (SHM) system is proposed to detect skin/stiffener debonding and delamination cracks proper of laminated composite structures. The SHM system is analyzed by means of a boundary element code implemented in the framework of piezoelectricity. The multidomain technique, coupled with an interface spring model, is used to model laminated composite structures as well as the bonding between the host delaminated structure and the piezoelectric sensor. Static sensitivity analyses are firstly performed on a drop-ply delaminated structure in order to identify a suitable configuration for the sensor. Then, the dynamic electromecha…
Dual boundary element model of 3D piezoelectric smart structures
2017
In this paper, the application of the dual boundary element method (DBEM) in the field of structural health monitoring (SHM) is explored. The model involves a 3D host structure, which is formulated by the DBEM in the Laplace domain, and 3D piezoelectric transducers, whose finite element model is derived from the electro-mechanical behaviour of piezoelectricity. The piezoelectric transducers and the host structure are coupled together via BEM variables. The practicability of this method in active sensing applications is demonstrated through comparisons with established FEM and parametric studies.