Search results for "Heat Transfer"
showing 10 items of 442 documents
Preliminary CAD implementation of EU-DEMO primary heat transfer systems for HCPB breeding blanket option
2019
Abstract This paper focuses on the 3D CAD implementation of the pipework and the main equipment of the Primary Heat Transfer System of EU-DEMO fusion power plant. In particular, the systems related to the Helium-Cooled Pebble Bed Breeding Blanket option are considered here. During the pulse operation, the breeding blanket modules will be the main thermal power source; Divertor and the Vacuum Vessel will contribute in the definition of the total reactor power. All the In-Vessel generated power is rejected to the Power Conversion System through a molten salt Intermediate Heat Transport System. The latter is equipped with an Energy Storage System to allow for continuous operation also during t…
The effect of the axial heat transfer on space charge accumulation phenomena in HVDC cables
2020
To date, it has been widespread accepted that the presence of space charge within the dielectric of high voltage direct current (HVDC) cables is one of the most relevant issues that limits the growing diffusion of this technology and its use at higher voltages. One of the reasons that leads to the establishment of space charge within the insulation of cables is the temperature dependence of its conductivity. Many researchers have demonstrated that high temperature drop over the insulation layer can lead to the reversal of the electric field profile. In certain conditions, this can over-stress the insulation during polarity reversal (PR) and transient over voltages (TOV) events accelerating …
Three-mode pneumatic management of marine U-tank systems
2012
Abstract This paper deals with a new pneumatic control strategy for the roll damping enhancement of marine U-tank stabilizers. The proposed technique consists in a three-mode operation, where the control is active only within a limited resonant range around the ship natural frequency, whereas the control valves are kept closed in the remaining frequency range. Moreover the connection valve between the two air chambers is either closed or partially opened for the low or high frequencies, respectively. The pressurized air for the active control is fed by a turbo-blower set aboard and operates accelerating the motion of the water mass in the U-duct. The theoretical analysis is conducted in the…
Natural Convection Cooling of a Hot Vertical Wall Wet by a Falling Liquid Film
2008
Abstract The system studied is a plane channel in which one of the two vertical walls is kept at an arbitrary temperature profile and may be partially or completely wet by a falling liquid film, while the opposite wall is adiabatic. Air from the environment flows along the channel with a mass flow rate which depends on the balance between hydraulic resistances and buoyancy forces. These latter, in their turn, depend on the distribution of temperature and humidity (hence, density) along the channel and eventually on the heat and mass transferred from wall and film to the humid air. A simplified computational model of the above system was developed and applied to the prediction of relevant qu…
CdTe crystal growth process by the Bridgman method: numerical simulation
2001
Abstract Numerical simulation of the CdTe crystal growth process by the Bridgman method is made by using the commercial computational code FLUENT for the mathematical solution of the governing equations. To reduce computational effort, we have made use of a two level strategy. In the first level we have considered the whole system formed by the ampoule with the liquid–solid charge, the furnace, and the air between them. The heat transfer is assumed to occur by conduction, convection and radiation between the furnace and the ampoule, and only by conduction through the ampoule wall and the solid and liquid CdTe. In the second level we focus on the ampoule and its content, using the values of …
Heat transfer simulation in a vertical Bridgman CdTe growth configuration
1999
Modelling and numerical simulation of crystal growth processes have been shown to be powerful tools in order to understand the physical effects of different parameters on the growth conditions. In this study a finite difference/control volume technique for the study of heat transfer has been employed. This model takes into account the whole system: furnace temperature profile, air gap between furnace walls and ampoule, ampoule geometry, crucible coating if any, solid and liquid CdTe thermal properties, conduction, convection and radiation of heat and phase change. We have used the commercial code FLUENT for the numerical resolution that can be running on a personal computer. Results show th…
Time-dependent simulation of Czochralski silicon crystal growth
1997
We have developed a detailed mathematical model and numerical simulation tools based on the streamline upwind/Petrov-Galerkin (SUPG) finite element formulation for the Czochralski silicon crystal growth. In this paper we consider the mathematical modeling and numerical simulation of the time-dependent melt flow and temperature field in a rotationally symmetric crystal growth environment. Heat inside the Czochralski furnace is transferred by conduction, convection and radiation, Radiating surfaces are assumed to be opaque, diffuse and gray. Hence the radiative heat exchange can be modeled with a non-local boundary condition on the radiating part of the surface. The position of the crystal-me…
Using CFD to derive reduced order models for heat transfer in particle curtains
2015
3–D Eulerian–Eulerian CFD is used to simulate convective heat transfer in free falling particle curtains. Total heat loss for curtaining particles is compared to heat loss for isolated single particles. Spherical silica particles with density of 2,634 kg/m³ at 400 K (200 µm, 400 µm and 600 µm) flow at approximately 0.041 kg/s to 0.2 kg/s through a narrow slot in a rectangular box (0.45 m × 0.9 m × 0.225 m) filled with ambient air. The slot sizes through which the particles enter the rectangular box were 10 to 80 mm wide. Modifying the slot size at 0.041 kg/s for 400 µm particles can lead to 13% increases in rates of convective heat transfer per unit mass. A reduced order model was developed…
Modelling of EM glass convection
2008
PurposeTo develop the mathematical model, which allows predicting the temperature and flow distribution of an opaque glass melt with the temperature‐dependent properties in case it is generated by electromagnetic and thermal convection. Analysis has been done for geometry of the model crucible with the immersed rod electrodes. Numerical analysis is used as a tool for finding out the parameters of the system, which allow getting desiderated homogeneity of temperature field by EM action.Design/methodology/approachANSYS CFX software is implemented for coupling of EM, thermal and HD processes in the modelled system. Usability of non‐inductive approximation is shown using a full harmonic analysi…
EXPERIMENTAL VALIDATION OF A FINITE DIFFERENCES TROMBE WALL MODEL
1983
ABSTRACT The paper describes a finite differences Trombe wall model validation, based on experimental data recorded at a passive systems test station in Central Italy. The computer code has been checked step by step, due to the different reliability of the data and to the various algorithms used in the code. Thus, cloudy and clear nights with no thermocirculation were simulated and compared with experimental data, then evening hours with thermocirculation, but no sun and, finally, a full day was simulated and compared. Some inaccuracy has been found in the simulation of wind effect on outer glass convective heat transfer coefficient. The code, however, has been found to provide data in reas…