Search results for "INFORMATION"

Impact of accumulated dust particles' charge on the photovoltaic module performance

2016

Abstract This work is focused on analysing effect of accumulated dust particles' charge on PV module performance. In the Dundee University's laboratory, dust particles have been created through epoxy powder and charged by using corona and tribo-electric charging methods by varying the charge levels of the accumulated dust particles. The PV module output has analysed for finding a relation between charge levels of the accumulated dust particles and its output voltage. Obtained experimental results have shown that charge level of accumulated dust particles on PV module's have significant impact on its output and dust particle accumulations are not associated with panel tilt angle.

Sewage sludge as cheap alternative to microalgae as feedstock of catalytic hydrothermal liquefaction processes

2019

Abstract Production of biocrude through hydrothermal liquefaction (HTL) of sewage sludge (SS) and Chlorella vulgaris was investigated. NiMo/Al2O3 (KF 851), CoMo/Al2O3 (KF 1022) and activated carbon felt, tested as catalysts at 598 K for 30 min, did not change the biocrude yield but significantly improved its quality. Quantitative sulfur removal and lower oxygen content were found in biocrude when KF 851 and KF 1022 were used with C. vulgaris. The same catalysts decreased O/C and S/C ratio of the biocrude from SS. The highest HHV (38.19 MJ/kg) and H/C ratio (1.65) and the lowest O/C (0.11) of the biocrude from SS were obtained with the cheaper activated carbon felt. A new product phase, prob…

Metal distribution in the process of lignocellulosic ethanol production from heavy metal contaminated sorghum biomass

2016

Effect of torrefaction on properties of pellets produced from woody biomass

2020

Torrefaction has been recognized as a promising strategy to improve handling and storage properties of wood-based pellets, thus producing a uniform-quality commodity with high energy density and hydrophobicity. In this work, pellets produced from spruce stem wood, bark, and forest residues were torrefied in a bench-scale tubular reactor at 225 and 275 °C with two residence times (30 and 60 min). The effects of torrefaction on general properties, grindability, mechanical properties, hydrophobicity, and microstructure of the studied pellets were investigated. The increase of torrefaction severity reduced mass yields, but the heating values and the fixed carbon content of the torrefied pellets…

Kinematics and U-Pb zircon ages of the sole metamorphics of the Marmaris Ophiolite, Lycian Nappes, Southwest Turkey

2018

In the eastern Mediterranean, the Lycian Nappes are found in the structurally uppermost position in the Anatolide-Tauride belt related to the closure of the Neotethys. In Western Turkey, the Marmaris Ophiolite with the metamorphic sole occupies the uppermost tectonic position in the Lycian belt. The metamorphic sole is represented by discontinuous tectonic slices composed of amphibolites, phyllites, micashists and quartzo-feldspathic micaschists. Zircons from the micashists and quartzo-feldspathic micaschists display dark cores and rims. The cores yield ages between 229 and 175 Ma, inner rims yield ages between 153 and 143 Ma and the outer rims show a concordia age of 96.7 ± 0.79 Ma. In ter…

Specifications for carbonate content quantification in recent marine sediments using Rock-Eval pyrolysis

2019

11 pages; International audience; The amount of CaCO3 in sediments and/or sedimentary rocks is usually measured by calcimetry while the nature of the carbonates is determined by X-ray diffraction. Recently, a carbonate recognition method based on the results of Rock-Eval pyrolysis was proposed in 2014 by Pillot et al. [1]. Rock-Eval pyrolysis is also widely used for the characterization of recent sediments. However, later in 2015 Baudin et al. [2] noticed that some of the characteristics of recent sediments tended to produce different results from those of more classical Rock-Eval analyses, causing bias in interpretations.In this study, the thermal stability of fossil and recent marine carb…

Energy Policies and Sustainable Management of Energy Sources

2017

Sustainability of current energy policies and known mid-term policies are analised in their multiple facets. First an overview is given about the trend of global energy demand and energy production, analysing the share of energy sources and the geographic distribution of demand, on the basis of statistics and projections published by major agencies. The issue of sustainability of the energy cycle is finally addressed, with specific reference to systems with high share of renewable energy and storage capability, highlighting some promising energy sources and storage approaches.

Dynamic goal programming synthetic indicator: an application for water companies sustainability assessment

2018

ABSTRACTThis study proposes to evaluate the sustainability of water companies through time by using a new approach, one that involves a dynamic synthetic indicator derived from goal programming techniques. This dynamic indicator approach incorporates catch-up and innovation indices, which enables one to identify the main factors that drive changes in sustainability through time. We used a case study approach to clarify this dynamic approach by evaluating indicator values from a sample of 129 Portuguese water companies over the 2012 to 2015 time period. For most of the water companies we evaluated, sustainability values changed over time, which illustrates the importance of evaluating dynami…

Impact Analysis Using Life Cycle Assessment of Asphalt Production from Primary Data

2020

Road construction and maintenance have a great impact on the environment, owing to the huge volumes of resources involved. Consequently, current production procedures and technologies must be properly investigated, for identifying and quantifying the life cycle environmental impacts produced. In this paper, primary data, i.e., site-specific data directly collected or measured on a reference plant, are analyzed for calculating the impact of the production of a hot mix asphalt. The analysis is performed in a from &ldquo

Training Secondary Education Teachers through the Prism of Sustainability: The Case of the Universitat de València

2018

Designing the training of future teachers through holistic and interdisciplinary visions is vital to developing coherent contents, epistemologies, and methodologies that put Education for Sustainability into action. The research presented here analyzes the teaching guides from the curriculum for the Master&rsquo